Expert Service 1-661-257-9993 [Hours]

Autotek ATK2/3X OPEN BOX COMPLETE

2-way / 3-way Active Crossover with Remote Bass Control

We apologize

This item has been discontinued

Get FAST answers from customers ASK a Question See questions answers

Item Condition: Open Box Complete

  • Previously installed, used, and box has been ripped
      • Active Crossover with Remote Bass Control
      • Infinite asymetrical electronic crossover design
      • 2-way or 3-way crossover system
      • Designed for 2 channel and 4 channel inputs
      • Subwoofer-input receivers with sub-outputs
      • Blue LED illumination
      • Low THD rating
      • Frequency multiplier
      • Rear input switch
      • 0-12 db Bass boost with the bass remote
      • Individual level adjustments for front, rear, and sub channels
      • 2nd Order Butterworth Hi-Pass filter for both front and rear channel
      • Full-range cascade output
      • Adjustable output level
      • Perfect for Mono or Stereo woofers
      • 180° Phase-Shift Switch
      • Maximum output: 8.5-Volts RMS
      • Quasi-Parametric EQ with 45Hz Bass Boost circuitry
      • Gold plated RCA contacts for optimal signal transfer
      • Chrome plated chassis looks great for all installations
      • DC/DC Regulated switching power supply
      • Dimensions: 7-3/4"D x 6-1/2"W x 1-3/4"H
      • Authorized Internet Dealer
      • 1-year Manufacturer's warranty

    Crossover Specifications

    Built-in Crossover

    A crossover is a type of filtering system that permits only certain frequencies to play. A Low-Pass (LP) crossover allows only frequencies below its setting to get through which is good in the case of some subwoofers. A High-Pass(HP) filter allows frequencies above its setting to pass through, this is normally used on speakers.

    When a crossover is set to FULL it means no filtering is added and the full frequency spectrum is allowed through the amplifier. Filtering is important because feeding a speaker frequencies it cannot reproduce effectively creates distortion.

    Low-Pass (LP)
    High-Pass (HP)
    High-Pass Crossover Frequency
    The high-pass crossover frequency can be a fixed crossover point or a variable crossover range. A variable high-pass crossover allows you to select a specific crossover point which allows frequencies above the set crossover point to pass, while making frequencies below the set point gently or harshly roll-off, depending on the steepness of the slope.

    The steepness of the roll-off slope is measured in dB/octave and refers to the rate of attenuation (lowering of volume) outside their pass bands.

    32 - 400 Hz
    Low-Pass Crossover Frequency
    The low-pass crossover frequency is typically used for subwoofers. It can be a fixed crossover point or a variable crossover range. A variable low-pass crossover allows you to select a specific crossover point which allows frequencies below the set crossover point to pass, while making frequencies above the set point gently or harshly roll-off, depending on the steepness of the slope.

    The steepness of the roll-off slope is measured in dB/octave and refers to the rate of attenuation (lowering of volume) outside their pass bands.

    32 - 400 Hz
    Built-in Bass Reconstruction
    Bass reconstructors, or bass enhancers, improve low frequency reproduction in a car audio system with at least one subwoofer. These bass expander products will help your subs produce accurate bass thumps.
    No
    Line Driver
    A line driver is a small amplifier used to support the strength of the audio signal coming from the source unit.
    No
    Display Color
    The display color refers to the color of the text and or graphics on the receiver.

    Multi-Color: When more than one color is on the display, for example one part of the text is white, while the other part is blue.

    Variable-Color: The display colors can be changed by the user. If the default color of text/display is blue for example, the user can change the settings to where the color turns to red. Variable color displays are typically described in detail in the item's description.

    TFT-LCD Display: In-dash receivers with a video screen that display multiple colors and often times video such as DVD, navigation or other video sources.

    Blue
    Equalizer Frequencies
    The frequency range that allows control of the center frequency of each equalization band.
    32 - 400 Hz
    Signal Boost/Cut
    The available signal boost or cut for each of the frequency bands.
    12 dB
    Max Output Level
    The maximum level (in volts) of signal output. A higher level will increase the clarity and boost your signal.
    8.5 volts
    THD (Total Harmonic Distortion)
    The amount of change in harmonic content of the signal as it is amplified. A lower figure indicates less change and a more accurate amp. THD below 0.10% is inaudible.
    .02%
    Signal-to-Noise Ratio
    This spec compares the strength of the signal to the level of background noise. A higher value indicates less background noise.
    90 dB

    Specials with this Item

    Promotions
    Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!

    Warranty and Return Policy

    Parts Warranty Duration
    1 year
    Labor Warranty Duration
    1 year
    Warranty Provider
    Manufacturer

    Summary of Customer Ratings & Reviews

    Rating Distribution

    5 Star
    0%
    4 Star
    0%
    3 Star
    0%
    2 Star
    0%
    1 Star
    0%

    Average Attribution Rating

    Durability
    0.0
    Value
    0.0
    Features
    0.0
    Design
    0.0
    Usability
    0.0
    Hide answersShow all answers | Sort by
    No questions have been asked about this item. Be the first!

    Product Summary

    Manufacturer

    Model Number

    LS-ATK2/3X-OBC

    Weight

    2.65lbs

    Internal SKU

    LS-atk23x-OBCra228307

    Internal Product ID

    98716

    Sonic Electronix Wiring Guide

    Wiring Diagram Legend

    Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

    Product Name: Autotek ATK2/3X OPEN BOX COMPLETE