Image Dynamics Q600.1
Tested at 622W RMS on our Amp Dyno! (Rated 600W by Image Dynamics) High Fidelity Q Series Monoblock Car Amplifier
Tested at 622W RMS on our Amp Dyno! (Rated 600W by Image Dynamics) High Fidelity Q Series Monoblock Car Amplifier
• RMS: 250W x 1 @ 4 ohms, 400W x 1 @ 2 ohms, 600W x 1 @ 1 ohm
• Total RMS Power: 1200W
• Wired Bass Remote Included
• Bass Boost: 0-12 dB
• Preamp RCA Outputs
• Dimensions: 17-3/4"L x 8-1/2"W x 2-1/4"H
• RMS: 250W x 1 @ 4 ohms, 400W x 1 @ 2 ohms, 600W x 1 @ 1 ohm
• Total RMS Power: 1200W
• Wired Bass Remote Included
• Bass Boost: 0-12 dB
• Preamp RCA Outputs
• Dimensions: 17-3/4"L x 8-1/2"W x 2-1/4"H
Keep your product protected longer! Extend the warranty after the manufacturer warranty expires. Read more
- Mechanical, electrical and product failure covered! 100% parts and labor covered. (Coverage starts after Mfr. warranty)
- Easy online management! Zero hassle claim service, available 24/7
Complete 2-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire
Complete 2-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire
Complete 2-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire
Complete 2-Channel 4 Gauge Amp Kit with RCA Cables and ANL Fuse Holder
Complete 4 Gauge Amplifier Wiring Kit with 2 Channel RCA Interconnects & ANL Fuse Holder
Complete 2-Channel 4 Gauge Amp Kit with RCA Cables and Speaker Wire
4 Gauge 100% (OFC) Oxygen Free Copper Amplifier Power Wiring Kit with Speaker Wire
4 Gauge Power Amplifier Installation Kit
4 Gauge Power Amplifier Installation Kit
2-Channel Line Out Converter
2 Channel Line Out Converter with xBOOST
Looking to fine tune the bass in your vehicle? Look no further
Maximize Your Bass Potential with an Audio Control’s legendary Bass Restoration Processor
16.4 ft of V-Series 2-Channel RCA Audio Premium Interconnect Cable with Dual Twisted Pair Hyper-Flex Technology
12 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)
Smart isolator - Monitors and auto-charging feature!
Great for isolating a second batter making it dedicated to the stereo system
Smart isolator - Monitors and auto-charging feature!
Smart isolator - Monitors and auto-charging feature!
Does not create a voltage drop to the second battery like conventional isolators
True 1.0 Farad 20V Capacitor with Digital Read-out, Built-in Distribution Block
1.0 Farad Capacitor with Digital Red Display for up to 1000W Max
Perfect for any installation and troubleshooting
Perfect for every toolbox
Impedance Meter / Signal Generator
Set your gains like a Pro, accurately and quickly
This is a must have! Set your crossover frequency like a Pro
Make installation a breeze with the XBTU
Accepts 4 gauge or 8-gauge wire
4/8 Gauge Mini ANL (MANL, AFS) Fuse Holder
Belva BAGUH2 AGU Fuse Holder
4/8 Gauge AGU Fuse Holder
Modular Linkable ANL Fuse Block
No-fail termination and current flow, it helps keep your system protected and running smoothly
4/8 Gauge Mini-ANL/MANL/AFS Fuse Holder
Mini-ANL (MANL/AFS) 80A Nickel Plated Fuses
Mini-ANL (MANL/AFS) 100A Nickel Plated Fuses
ANL 100A Nickel plated for better power transfer
Two fuses per order. High quality 200 Amp ANL Fuses
Two fuses per order. High quality 300 Amp ANL Fuses
Great for amplifiers that do not accept a large gauge power wire
Spade Terminals • 4 Gauge • 1 Red & 1 Black • Nickel Plated
4 Gauge Ring Terminals with 3/8" Opening (5 Pieces)
5 Pack of Black 4 Gauge Ring Terminals
(4-pack) 4 Gauge Solid Copper Ring Terminals with Shrink Tubing
Image Dynamics SQ1200.1D
1200W RMS SQ Series Class-D Monoblock 1-Ohm Stable Amplifier with Bass Knob Included
1200W RMS SQ Series Class-D Monoblock 1-Ohm Stable Amplifier with Bass Knob Included
• 400 Watts RMS x 1 @ 4 ohms
• 800 Watts RMS x 1 @ 2 ohms
• 1200 Watts RMS x 1 @ 1 ohm
• Total Peak Power: 2400 Watts
• Variable Bass Boost: 0 to +12 dB bass boost at 45 Hz
• Heavy duty aluminum alloy heat-sink for extreme heat dissipation
• Dimensions: 8-1/2"W x 20"L x 2-1/4"H
• 400 Watts RMS x 1 @ 4 ohms
• 800 Watts RMS x 1 @ 2 ohms
• 1200 Watts RMS x 1 @ 1 ohm
• Total Peak Power: 2400 Watts
• Variable Bass Boost: 0 to +12 dB bass boost at 45 Hz
• Heavy duty aluminum alloy heat-sink for extreme heat dissipation
• Dimensions: 8-1/2"W x 20"L x 2-1/4"H
Keep your product protected longer! Extend the warranty after the manufacturer warranty expires. Read more
- Mechanical, electrical and product failure covered! 100% parts and labor covered. (Coverage starts after Mfr. warranty)
- Easy online management! Zero hassle claim service, available 24/7
The perfect kit for your perfect amp!
1/0 Gauge Premium (CCA) Copper Clad Aluminum Complete 2-Channel Amplifier Wiring Kit with RCA for Amplifiers up to 2000 Watts - BLUE
1/0 Gauge Amplifier Wiring Kit with 2-Channel RCA's
2-Channel Line Out Converter
2 Channel Line Out Converter with xBOOST
Looking to fine tune the bass in your vehicle? Look no further
Maximize Your Bass Potential with an Audio Control’s legendary Bass Restoration Processor
16.4 ft. of 2-Channel Interconnects with Super Quad Construction & Rhodium-Plated Connectors
12 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)
Comes with everything you need to upgrade your power and ground wire.
12V High Performance AGM Power Cell Battery for Systems Up To 2000 Watts
Smart isolator - Monitors and auto-charging feature!
Great for isolating a second batter making it dedicated to the stereo system
Smart isolator - Monitors and auto-charging feature!
Smart isolator - Monitors and auto-charging feature!
Does not create a voltage drop to the second battery like conventional isolators
2.0 Farad Capacitor with Digital Red Display
Perfect for any installation and troubleshooting
Perfect for every toolbox
Impedance Meter / Signal Generator
Set your gains like a Pro, accurately and quickly
This is a must have! Set your crossover frequency like a Pro
Make installation a breeze with the XBTU
Belva BAGUH2 AGU Fuse Holder
Modular Linkable ANL Fuse Block
No-fail termination and current flow, it helps keep your system protected and running smoothly
Mini-ANL (MANL/AFS) 80A Nickel Plated Fuses
Mini-ANL (MANL/AFS) 100A Nickel Plated Fuses
ANL 100A Nickel plated for better power transfer
Two fuses per order. High quality 200 Amp ANL Fuses
Two fuses per order. High quality 300 Amp ANL Fuses
Great for amplifiers that do not accept large gauge power wire
Nickel Plated Brass - 5 Pieces (3 Red & 2 Black)
2pk - 1/0 Gauge Ring Terminals w 5/16" Opening
(4-pack) 1/0 Gauge Solid Copper 5/16 Ring Terminals with Shrink Tubing
0.25 Meter (0.86 ft) Hyper-Flex RCA cable w/ Serpentine-Cut Nickel Plated Connectors
Image Dynamics Q1200.1
1200W RMS High Fidelity Q Series Monoblock Car Amplifier
';insertAfter(target,newItem);}var exclusive=document.getElementsByClassName("sonicExclusiveIcon").length;var sale=document.getElementsByClassName("productSaleBanner").length;if(sale == 0 && exclusive ==0){addCertified();}1200W RMS High Fidelity Q Series Monoblock Car Amplifier
• RMS: 400W x 1 @ 4 ohms, 800W x 1 @ 2 ohms, 1200W x 1 @ 1 ohm
• Total RMS Power: 1200W
• Wired Bass Remote Included
• Bass Boost: 0-12 dB
• Preamp RCA Outputs
• Dimensions: 20"L x 8-1/2"W x 2-1/4"H
• RMS: 400W x 1 @ 4 ohms, 800W x 1 @ 2 ohms, 1200W x 1 @ 1 ohm
• Total RMS Power: 1200W
• Wired Bass Remote Included
• Bass Boost: 0-12 dB
• Preamp RCA Outputs
• Dimensions: 20"L x 8-1/2"W x 2-1/4"H
Keep your product protected longer! Extend the warranty after the manufacturer warranty expires. Read more
- Mechanical, electrical and product failure covered! 100% parts and labor covered. (Coverage starts after Mfr. warranty)
- Easy online management! Zero hassle claim service, available 24/7
2-Channel 100% OFC Complete True 4 Gauge Amp Kit with RCA Cables and Speaker Wire
Complete 2-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire
4 Gauge 100% Pure Crystal-Oxygen Free Copper 2-Channel Amplifier Wiring Kit
4 Gauge OFC Power Amplifier Installation Kit
4 Gauge Premium Amplifier Power Connection Kit
2-Channel Line Out Converter
2 Channel Line Out Converter with xBOOST
Looking to fine tune the bass in your vehicle? Look no further
Maximize Your Bass Potential with an Audio Control’s legendary Bass Restoration Processor
16.4 ft. of 2-Channel Interconnects with Super Quad Construction & Rhodium-Plated Connectors
12 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)
Comes with everything you need to upgrade your power and ground wire.
12V High Performance AGM Power Cell Battery for Systems Up To 2000 Watts
Smart isolator - Monitors and auto-charging feature!
Great for isolating a second batter making it dedicated to the stereo system
Smart isolator - Monitors and auto-charging feature!
Smart isolator - Monitors and auto-charging feature!
Does not create a voltage drop to the second battery like conventional isolators
2.0 Farad Capacitor with Digital Red Display
Perfect for any installation and troubleshooting
Perfect for every toolbox
Impedance Meter / Signal Generator
Set your gains like a Pro, accurately and quickly
This is a must have! Set your crossover frequency like a Pro
Make installation a breeze with the XBTU
Accepts 4 gauge or 8-gauge wire
4/8 Gauge Mini ANL (MANL, AFS) Fuse Holder
Belva BAGUH2 AGU Fuse Holder
4/8 Gauge AGU Fuse Holder
Modular Linkable ANL Fuse Block
No-fail termination and current flow, it helps keep your system protected and running smoothly
4/8 Gauge Mini-ANL/MANL/AFS Fuse Holder
Mini-ANL (MANL/AFS) 80A Nickel Plated Fuses
Mini-ANL (MANL/AFS) 100A Nickel Plated Fuses
ANL 100A Nickel plated for better power transfer
Two fuses per order. High quality 200 Amp ANL Fuses
Two fuses per order. High quality 300 Amp ANL Fuses
Great for amplifiers that do not accept a large gauge power wire
Spade Terminals • 4 Gauge • 1 Red & 1 Black • Nickel Plated
4 Gauge Ring Terminals with 3/8" Opening (5 Pieces)
5 Pack of Black 4 Gauge Ring Terminals
(4-pack) 4 Gauge Solid Copper Ring Terminals with Shrink Tubing
0.25 Meter (0.86 ft) Hyper-Flex RCA cable w/ Serpentine-Cut Nickel Plated Connectors
Image Dynamics SQ600.1D (Open Box Complete)
600W RMS SQ Series Class-D Monoblock 1-Ohm Stable Amplifier with Bass Knob Included
600W RMS SQ Series Class-D Monoblock 1-Ohm Stable Amplifier with Bass Knob Included
• 250 Watts RMS x 1 @ 4 ohms
• 400 Watts RMS x 1 @ 2 ohms
• 600 Watts RMS x 1 @ 1 ohm
• Total Peak Power: 1200 Watts
• Variable Bass Boost: 0 to +12 dB bass boost at 45 Hz
• Heavy duty aluminum alloy heat-sink for extreme heat dissipation
• Dimensions: 8-1/2"W x 17-3/4"L x 2-1/4"H
• 250 Watts RMS x 1 @ 4 ohms
• 400 Watts RMS x 1 @ 2 ohms
• 600 Watts RMS x 1 @ 1 ohm
• Total Peak Power: 1200 Watts
• Variable Bass Boost: 0 to +12 dB bass boost at 45 Hz
• Heavy duty aluminum alloy heat-sink for extreme heat dissipation
• Dimensions: 8-1/2"W x 17-3/4"L x 2-1/4"H
Complete 2-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire
Complete 2-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire
Complete 2-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire
Complete 2-Channel 4 Gauge Amp Kit with RCA Cables and ANL Fuse Holder
Complete 4 Gauge Amplifier Wiring Kit with 2 Channel RCA Interconnects & ANL Fuse Holder
Complete 2-Channel 4 Gauge Amp Kit with RCA Cables and Speaker Wire
4 Gauge 100% (OFC) Oxygen Free Copper Amplifier Power Wiring Kit with Speaker Wire
4 Gauge Power Amplifier Installation Kit
4 Gauge Power Amplifier Installation Kit
2-Channel Line Out Converter
2 Channel Line Out Converter with xBOOST
Looking to fine tune the bass in your vehicle? Look no further
Maximize Your Bass Potential with an Audio Control’s legendary Bass Restoration Processor
16.4 ft of V-Series 2-Channel RCA Audio Premium Interconnect Cable with Dual Twisted Pair Hyper-Flex Technology
12 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)
Smart isolator - Monitors and auto-charging feature!
Great for isolating a second batter making it dedicated to the stereo system
Smart isolator - Monitors and auto-charging feature!
Smart isolator - Monitors and auto-charging feature!
Does not create a voltage drop to the second battery like conventional isolators
True 1.0 Farad 20V Capacitor with Digital Read-out, Built-in Distribution Block
1.0 Farad Capacitor with Digital Red Display for up to 1000W Max
Perfect for any installation and troubleshooting
Perfect for every toolbox
Impedance Meter / Signal Generator
Set your gains like a Pro, accurately and quickly
This is a must have! Set your crossover frequency like a Pro
Make installation a breeze with the XBTU
Accepts 4 gauge or 8-gauge wire
4/8 Gauge Mini ANL (MANL, AFS) Fuse Holder
Belva BAGUH2 AGU Fuse Holder
4/8 Gauge AGU Fuse Holder
Modular Linkable ANL Fuse Block
No-fail termination and current flow, it helps keep your system protected and running smoothly
4/8 Gauge Mini-ANL/MANL/AFS Fuse Holder
Mini-ANL (MANL/AFS) 80A Nickel Plated Fuses
Mini-ANL (MANL/AFS) 100A Nickel Plated Fuses
ANL 100A Nickel plated for better power transfer
Two fuses per order. High quality 200 Amp ANL Fuses
Two fuses per order. High quality 300 Amp ANL Fuses
Great for amplifiers that do not accept a large gauge power wire
Spade Terminals • 4 Gauge • 1 Red & 1 Black • Nickel Plated
4 Gauge Ring Terminals with 3/8" Opening (5 Pieces)
5 Pack of Black 4 Gauge Ring Terminals
(4-pack) 4 Gauge Solid Copper Ring Terminals with Shrink Tubing
Image Dynamics Q1200.1 Damaged Packaging Only (New)
1200W RMS High Fidelity Q Series Monoblock Car Amplifier
1200W RMS High Fidelity Q Series Monoblock Car Amplifier
• RMS: 400W x 1 @ 4 ohms, 800W x 1 @ 2 ohms, 1200W x 1 @ 1 ohm
• Total RMS Power: 1200W
• Wired Bass Remote Included
• Bass Boost: 0-12 dB
• Preamp RCA Outputs
• Dimensions: 20"L x 8-1/2"W x 2-1/4"H
• RMS: 400W x 1 @ 4 ohms, 800W x 1 @ 2 ohms, 1200W x 1 @ 1 ohm
• Total RMS Power: 1200W
• Wired Bass Remote Included
• Bass Boost: 0-12 dB
• Preamp RCA Outputs
• Dimensions: 20"L x 8-1/2"W x 2-1/4"H
2-Channel 100% OFC Complete True 4 Gauge Amp Kit with RCA Cables and Speaker Wire
Complete 2-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire
4 Gauge 100% Pure Crystal-Oxygen Free Copper 2-Channel Amplifier Wiring Kit
4 Gauge OFC Power Amplifier Installation Kit
4 Gauge Premium Amplifier Power Connection Kit
2-Channel Line Out Converter
2 Channel Line Out Converter with xBOOST
Looking to fine tune the bass in your vehicle? Look no further
Maximize Your Bass Potential with an Audio Control’s legendary Bass Restoration Processor
16.4 ft. of 2-Channel Interconnects with Super Quad Construction & Rhodium-Plated Connectors
12 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)
Comes with everything you need to upgrade your power and ground wire.
12V High Performance AGM Power Cell Battery for Systems Up To 2000 Watts
Smart isolator - Monitors and auto-charging feature!
Great for isolating a second batter making it dedicated to the stereo system
Smart isolator - Monitors and auto-charging feature!
Smart isolator - Monitors and auto-charging feature!
Does not create a voltage drop to the second battery like conventional isolators
2.0 Farad Capacitor with Digital Red Display
Perfect for any installation and troubleshooting
Perfect for every toolbox
Impedance Meter / Signal Generator
Set your gains like a Pro, accurately and quickly
This is a must have! Set your crossover frequency like a Pro
Make installation a breeze with the XBTU
Accepts 4 gauge or 8-gauge wire
4/8 Gauge Mini ANL (MANL, AFS) Fuse Holder
Belva BAGUH2 AGU Fuse Holder
4/8 Gauge AGU Fuse Holder
Modular Linkable ANL Fuse Block
No-fail termination and current flow, it helps keep your system protected and running smoothly
4/8 Gauge Mini-ANL/MANL/AFS Fuse Holder
Mini-ANL (MANL/AFS) 80A Nickel Plated Fuses
Mini-ANL (MANL/AFS) 100A Nickel Plated Fuses
ANL 100A Nickel plated for better power transfer
Two fuses per order. High quality 200 Amp ANL Fuses
Two fuses per order. High quality 300 Amp ANL Fuses
Great for amplifiers that do not accept a large gauge power wire
Spade Terminals • 4 Gauge • 1 Red & 1 Black • Nickel Plated
4 Gauge Ring Terminals with 3/8" Opening (5 Pieces)
5 Pack of Black 4 Gauge Ring Terminals
(4-pack) 4 Gauge Solid Copper Ring Terminals with Shrink Tubing
0.25 Meter (0.86 ft) Hyper-Flex RCA cable w/ Serpentine-Cut Nickel Plated Connectors
Image Dynamics SQ600.1D
600W RMS SQ Series Class-D Monoblock 1-Ohm Stable Amplifier with Bass Knob Included
600W RMS SQ Series Class-D Monoblock 1-Ohm Stable Amplifier with Bass Knob Included
• 250 Watts RMS x 1 @ 4 ohms
• 400 Watts RMS x 1 @ 2 ohms
• 600 Watts RMS x 1 @ 1 ohm
• Total Peak Power: 1200 Watts
• Variable Bass Boost: 0 to +12 dB bass boost at 45 Hz
• Heavy duty aluminum alloy heat-sink for extreme heat dissipation
• Dimensions: 8-1/2"W x 17-3/4"L x 2-1/4"H
• 250 Watts RMS x 1 @ 4 ohms
• 400 Watts RMS x 1 @ 2 ohms
• 600 Watts RMS x 1 @ 1 ohm
• Total Peak Power: 1200 Watts
• Variable Bass Boost: 0 to +12 dB bass boost at 45 Hz
• Heavy duty aluminum alloy heat-sink for extreme heat dissipation
• Dimensions: 8-1/2"W x 17-3/4"L x 2-1/4"H
Keep your product protected longer! Extend the warranty after the manufacturer warranty expires. Read more
- Mechanical, electrical and product failure covered! 100% parts and labor covered. (Coverage starts after Mfr. warranty)
- Easy online management! Zero hassle claim service, available 24/7
Complete 2-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire
Complete 2-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire
Complete 2-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire
Complete 2-Channel 4 Gauge Amp Kit with RCA Cables and ANL Fuse Holder
Complete 4 Gauge Amplifier Wiring Kit with 2 Channel RCA Interconnects & ANL Fuse Holder
Complete 2-Channel 4 Gauge Amp Kit with RCA Cables and Speaker Wire
4 Gauge 100% (OFC) Oxygen Free Copper Amplifier Power Wiring Kit with Speaker Wire
4 Gauge Power Amplifier Installation Kit
4 Gauge Power Amplifier Installation Kit
2-Channel Line Out Converter
2 Channel Line Out Converter with xBOOST
Looking to fine tune the bass in your vehicle? Look no further
Maximize Your Bass Potential with an Audio Control’s legendary Bass Restoration Processor
16.4 ft. of 2-Channel Interconnects with Super Quad Construction & Rhodium-Plated Connectors
12 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)
Smart isolator - Monitors and auto-charging feature!
Great for isolating a second batter making it dedicated to the stereo system
Smart isolator - Monitors and auto-charging feature!
Smart isolator - Monitors and auto-charging feature!
Does not create a voltage drop to the second battery like conventional isolators
True 1.0 Farad 20V Capacitor with Digital Read-out, Built-in Distribution Block
1.0 Farad Capacitor with Digital Red Display for up to 1000W Max
Perfect for any installation and troubleshooting
Perfect for every toolbox
Impedance Meter / Signal Generator
Set your gains like a Pro, accurately and quickly
This is a must have! Set your crossover frequency like a Pro
Make installation a breeze with the XBTU
Accepts 4 gauge or 8-gauge wire
4/8 Gauge Mini ANL (MANL, AFS) Fuse Holder
Belva BAGUH2 AGU Fuse Holder
4/8 Gauge AGU Fuse Holder
Modular Linkable ANL Fuse Block
No-fail termination and current flow, it helps keep your system protected and running smoothly
4/8 Gauge Mini-ANL/MANL/AFS Fuse Holder
Mini-ANL (MANL/AFS) 80A Nickel Plated Fuses
Mini-ANL (MANL/AFS) 100A Nickel Plated Fuses
ANL 100A Nickel plated for better power transfer
Two fuses per order. High quality 200 Amp ANL Fuses
Two fuses per order. High quality 300 Amp ANL Fuses
Great for amplifiers that do not accept a large gauge power wire
Spade Terminals • 4 Gauge • 1 Red & 1 Black • Nickel Plated
4 Gauge Ring Terminals with 3/8" Opening (5 Pieces)
5 Pack of Black 4 Gauge Ring Terminals
(4-pack) 4 Gauge Solid Copper Ring Terminals with Shrink Tubing
0.25 Meter (0.86 ft) Hyper-Flex RCA cable w/ Serpentine-Cut Nickel Plated Connectors
Image Dynamics Q600.1 with $25 eGift Card
$25 eGift Card Included! 600 RMS Monoblock Class A/B High Fidelity Q Series Car Amplifier
$25 eGift Card Included! 600 RMS Monoblock Class A/B High Fidelity Q Series Car Amplifier
• RMS: 250W x 1 @ 4 ohms, 400W x 1 @ 2 ohms, 600W x 1 @ 1 ohm
• Total RMS Power: 1200W
• Wired Bass Remote Included
• Bass Boost: 0-12 dB
• Preamp RCA Outputs
• Dimensions: 17-3/4"L x 8-1/2"W x 2-1/4"H
• RMS: 250W x 1 @ 4 ohms, 400W x 1 @ 2 ohms, 600W x 1 @ 1 ohm
• Total RMS Power: 1200W
• Wired Bass Remote Included
• Bass Boost: 0-12 dB
• Preamp RCA Outputs
• Dimensions: 17-3/4"L x 8-1/2"W x 2-1/4"H
Keep your product protected longer! Extend the warranty after the manufacturer warranty expires. Read more
- Mechanical, electrical and product failure covered! 100% parts and labor covered. (Coverage starts after Mfr. warranty)
- Easy online management! Zero hassle claim service, available 24/7
Complete 2-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire
Complete 2-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire
Complete 2-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire
Complete 2-Channel 4 Gauge Amp Kit with RCA Cables and ANL Fuse Holder
Complete 4 Gauge Amplifier Wiring Kit with 2 Channel RCA Interconnects & ANL Fuse Holder
Complete 2-Channel 4 Gauge Amp Kit with RCA Cables and Speaker Wire
4 Gauge 100% (OFC) Oxygen Free Copper Amplifier Power Wiring Kit with Speaker Wire
4 Gauge Power Amplifier Installation Kit
4 Gauge Power Amplifier Installation Kit
2-Channel Line Out Converter
2 Channel Line Out Converter with xBOOST
Looking to fine tune the bass in your vehicle? Look no further
Maximize Your Bass Potential with an Audio Control’s legendary Bass Restoration Processor
16.4 ft of V-Series 2-Channel RCA Audio Premium Interconnect Cable with Dual Twisted Pair Hyper-Flex Technology
12 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)
Smart isolator - Monitors and auto-charging feature!
Great for isolating a second batter making it dedicated to the stereo system
Smart isolator - Monitors and auto-charging feature!
Smart isolator - Monitors and auto-charging feature!
Does not create a voltage drop to the second battery like conventional isolators
True 1.0 Farad 20V Capacitor with Digital Read-out, Built-in Distribution Block
1.0 Farad Capacitor with Digital Red Display for up to 1000W Max
Perfect for any installation and troubleshooting
Perfect for every toolbox
Impedance Meter / Signal Generator
Set your gains like a Pro, accurately and quickly
This is a must have! Set your crossover frequency like a Pro
Make installation a breeze with the XBTU
Accepts 4 gauge or 8-gauge wire
4/8 Gauge Mini ANL (MANL, AFS) Fuse Holder
Belva BAGUH2 AGU Fuse Holder
4/8 Gauge AGU Fuse Holder
Modular Linkable ANL Fuse Block
No-fail termination and current flow, it helps keep your system protected and running smoothly
4/8 Gauge Mini-ANL/MANL/AFS Fuse Holder
Mini-ANL (MANL/AFS) 80A Nickel Plated Fuses
Mini-ANL (MANL/AFS) 100A Nickel Plated Fuses
ANL 100A Nickel plated for better power transfer
Two fuses per order. High quality 200 Amp ANL Fuses
Two fuses per order. High quality 300 Amp ANL Fuses
Great for amplifiers that do not accept a large gauge power wire
Spade Terminals • 4 Gauge • 1 Red & 1 Black • Nickel Plated
4 Gauge Ring Terminals with 3/8" Opening (5 Pieces)
5 Pack of Black 4 Gauge Ring Terminals
(4-pack) 4 Gauge Solid Copper Ring Terminals with Shrink Tubing
Image Dynamics SQ1200.1D Damaged Packaging Only (New)
1200W RMS SQ Series Class-D Monoblock 1-Ohm Stable Amplifier with Bass Knob Included
1200W RMS SQ Series Class-D Monoblock 1-Ohm Stable Amplifier with Bass Knob Included
• 400 Watts RMS x 1 @ 4 ohms
• 800 Watts RMS x 1 @ 2 ohms
• 1200 Watts RMS x 1 @ 1 ohm
• Total Peak Power: 2400 Watts
• Variable Bass Boost: 0 to +12 dB bass boost at 45 Hz
• Heavy duty aluminum alloy heat-sink for extreme heat dissipation
• Dimensions: 8-1/2"W x 20"L x 2-1/4"H
• 400 Watts RMS x 1 @ 4 ohms
• 800 Watts RMS x 1 @ 2 ohms
• 1200 Watts RMS x 1 @ 1 ohm
• Total Peak Power: 2400 Watts
• Variable Bass Boost: 0 to +12 dB bass boost at 45 Hz
• Heavy duty aluminum alloy heat-sink for extreme heat dissipation
• Dimensions: 8-1/2"W x 20"L x 2-1/4"H
The perfect kit for your perfect amp!
1/0 Gauge Premium (CCA) Copper Clad Aluminum Complete 2-Channel Amplifier Wiring Kit with RCA for Amplifiers up to 2000 Watts - BLUE
1/0 Gauge Amplifier Wiring Kit with 2-Channel RCA's
2-Channel Line Out Converter
2 Channel Line Out Converter with xBOOST
Looking to fine tune the bass in your vehicle? Look no further
Maximize Your Bass Potential with an Audio Control’s legendary Bass Restoration Processor
16.4 ft. of 2-Channel Interconnects with Super Quad Construction & Rhodium-Plated Connectors
12 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)
Comes with everything you need to upgrade your power and ground wire.
12V High Performance AGM Power Cell Battery for Systems Up To 2000 Watts
Smart isolator - Monitors and auto-charging feature!
Great for isolating a second batter making it dedicated to the stereo system
Smart isolator - Monitors and auto-charging feature!
Smart isolator - Monitors and auto-charging feature!
Does not create a voltage drop to the second battery like conventional isolators
2.0 Farad Capacitor with Digital Red Display
Perfect for any installation and troubleshooting
Perfect for every toolbox
Impedance Meter / Signal Generator
Set your gains like a Pro, accurately and quickly
This is a must have! Set your crossover frequency like a Pro
Make installation a breeze with the XBTU
Belva BAGUH2 AGU Fuse Holder
Modular Linkable ANL Fuse Block
No-fail termination and current flow, it helps keep your system protected and running smoothly
Mini-ANL (MANL/AFS) 80A Nickel Plated Fuses
Mini-ANL (MANL/AFS) 100A Nickel Plated Fuses
ANL 100A Nickel plated for better power transfer
Two fuses per order. High quality 200 Amp ANL Fuses
Two fuses per order. High quality 300 Amp ANL Fuses
Great for amplifiers that do not accept large gauge power wire
Nickel Plated Brass - 5 Pieces (3 Red & 2 Black)
2pk - 1/0 Gauge Ring Terminals w 5/16" Opening
(4-pack) 1/0 Gauge Solid Copper 5/16 Ring Terminals with Shrink Tubing
0.25 Meter (0.86 ft) Hyper-Flex RCA cable w/ Serpentine-Cut Nickel Plated Connectors
Image Dynamics Q1200.1 with $50 eGift Card
$50 eGift Card Included! 1200 RMS Monoblock Class A/B High Fidelity Q Series Car Amplifier
$50 eGift Card Included! 1200 RMS Monoblock Class A/B High Fidelity Q Series Car Amplifier
• RMS: 400W x 1 @ 4 ohms, 800W x 1 @ 2 ohms, 1200W x 1 @ 1 ohm
• Total RMS Power: 1200W
• Wired Bass Remote Included
• Bass Boost: 0-12 dB
• Preamp RCA Outputs
• Dimensions: 20"L x 8-1/2"W x 2-1/4"H
• RMS: 400W x 1 @ 4 ohms, 800W x 1 @ 2 ohms, 1200W x 1 @ 1 ohm
• Total RMS Power: 1200W
• Wired Bass Remote Included
• Bass Boost: 0-12 dB
• Preamp RCA Outputs
• Dimensions: 20"L x 8-1/2"W x 2-1/4"H
Keep your product protected longer! Extend the warranty after the manufacturer warranty expires. Read more
- Mechanical, electrical and product failure covered! 100% parts and labor covered. (Coverage starts after Mfr. warranty)
- Easy online management! Zero hassle claim service, available 24/7
2-Channel 100% OFC Complete True 4 Gauge Amp Kit with RCA Cables and Speaker Wire
Complete 2-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire
4 Gauge 100% Pure Crystal-Oxygen Free Copper 2-Channel Amplifier Wiring Kit
4 Gauge OFC Power Amplifier Installation Kit
4 Gauge Premium Amplifier Power Connection Kit
2-Channel Line Out Converter
2 Channel Line Out Converter with xBOOST
Looking to fine tune the bass in your vehicle? Look no further
Maximize Your Bass Potential with an Audio Control’s legendary Bass Restoration Processor
16.4 ft. of 2-Channel Interconnects with Super Quad Construction & Rhodium-Plated Connectors
12 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)
Comes with everything you need to upgrade your power and ground wire.
12V High Performance AGM Power Cell Battery for Systems Up To 2000 Watts
Smart isolator - Monitors and auto-charging feature!
Great for isolating a second batter making it dedicated to the stereo system
Smart isolator - Monitors and auto-charging feature!
Smart isolator - Monitors and auto-charging feature!
Does not create a voltage drop to the second battery like conventional isolators
2.0 Farad Capacitor with Digital Red Display
Perfect for any installation and troubleshooting
Perfect for every toolbox
Impedance Meter / Signal Generator
Set your gains like a Pro, accurately and quickly
This is a must have! Set your crossover frequency like a Pro
Make installation a breeze with the XBTU
Accepts 4 gauge or 8-gauge wire
4/8 Gauge Mini ANL (MANL, AFS) Fuse Holder
Belva BAGUH2 AGU Fuse Holder
4/8 Gauge AGU Fuse Holder
Modular Linkable ANL Fuse Block
No-fail termination and current flow, it helps keep your system protected and running smoothly
4/8 Gauge Mini-ANL/MANL/AFS Fuse Holder
Mini-ANL (MANL/AFS) 80A Nickel Plated Fuses
Mini-ANL (MANL/AFS) 100A Nickel Plated Fuses
ANL 100A Nickel plated for better power transfer
Two fuses per order. High quality 200 Amp ANL Fuses
Two fuses per order. High quality 300 Amp ANL Fuses
Great for amplifiers that do not accept a large gauge power wire
Spade Terminals • 4 Gauge • 1 Red & 1 Black • Nickel Plated
4 Gauge Ring Terminals with 3/8" Opening (5 Pieces)
5 Pack of Black 4 Gauge Ring Terminals
(4-pack) 4 Gauge Solid Copper Ring Terminals with Shrink Tubing
0.25 Meter (0.86 ft) Hyper-Flex RCA cable w/ Serpentine-Cut Nickel Plated Connectors
Image Dynamics Q1200.1 Open Box, Good Condition (Used)
1200W RMS High Fidelity Q Series Monoblock Car Amplifier Open Box, Good Condition (Used)
1200W RMS High Fidelity Q Series Monoblock Car Amplifier Open Box, Good Condition (Used)
• RMS: 400W x 1 @ 4 ohms, 800W x 1 @ 2 ohms, 1200W x 1 @ 1 ohm
• Total RMS Power: 1200W
• Wired Bass Remote Included
• Bass Boost: 0-12 dB
• Preamp RCA Outputs
• Dimensions: 20"L x 8-1/2"W x 2-1/4"H
• RMS: 400W x 1 @ 4 ohms, 800W x 1 @ 2 ohms, 1200W x 1 @ 1 ohm
• Total RMS Power: 1200W
• Wired Bass Remote Included
• Bass Boost: 0-12 dB
• Preamp RCA Outputs
• Dimensions: 20"L x 8-1/2"W x 2-1/4"H
Complete 2-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire
Complete 2-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire
Complete 2-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire
Complete 2-Channel 4 Gauge Amp Kit with RCA Cables and ANL Fuse Holder
Complete 4 Gauge Amplifier Wiring Kit with 2 Channel RCA Interconnects & ANL Fuse Holder
Complete 2-Channel 4 Gauge Amp Kit with RCA Cables and Speaker Wire
4 Gauge 100% (OFC) Oxygen Free Copper Amplifier Power Wiring Kit with Speaker Wire
4 Gauge Power Amplifier Installation Kit
4 Gauge Power Amplifier Installation Kit
2-Channel Line Out Converter
2 Channel Line Out Converter with xBOOST
Looking to fine tune the bass in your vehicle? Look no further
Maximize Your Bass Potential with an Audio Control’s legendary Bass Restoration Processor
16.4 ft. of 2-Channel Interconnects with Super Quad Construction & Rhodium-Plated Connectors
12 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)
Comes with everything you need to upgrade your power and ground wire.
12V High Performance AGM Power Cell Battery for Systems Up To 2000 Watts
Smart isolator - Monitors and auto-charging feature!
Great for isolating a second batter making it dedicated to the stereo system
Smart isolator - Monitors and auto-charging feature!
Smart isolator - Monitors and auto-charging feature!
Does not create a voltage drop to the second battery like conventional isolators
2.0 Farad Capacitor with Digital Red Display
Perfect for any installation and troubleshooting
Perfect for every toolbox
Impedance Meter / Signal Generator
Set your gains like a Pro, accurately and quickly
This is a must have! Set your crossover frequency like a Pro
Make installation a breeze with the XBTU
Accepts 4 gauge or 8-gauge wire
4/8 Gauge Mini ANL (MANL, AFS) Fuse Holder
Belva BAGUH2 AGU Fuse Holder
4/8 Gauge AGU Fuse Holder
Modular Linkable ANL Fuse Block
No-fail termination and current flow, it helps keep your system protected and running smoothly
4/8 Gauge Mini-ANL/MANL/AFS Fuse Holder
Mini-ANL (MANL/AFS) 80A Nickel Plated Fuses
Mini-ANL (MANL/AFS) 100A Nickel Plated Fuses
ANL 100A Nickel plated for better power transfer
Two fuses per order. High quality 200 Amp ANL Fuses
Two fuses per order. High quality 300 Amp ANL Fuses
Great for amplifiers that do not accept a large gauge power wire
Spade Terminals • 4 Gauge • 1 Red & 1 Black • Nickel Plated
4 Gauge Ring Terminals with 3/8" Opening (5 Pieces)
5 Pack of Black 4 Gauge Ring Terminals
(4-pack) 4 Gauge Solid Copper Ring Terminals with Shrink Tubing
0.25 Meter (0.86 ft) Hyper-Flex RCA cable w/ Serpentine-Cut Nickel Plated Connectors