Expert Service 1-877-289-7664 [Hours]

Monoblock Amplifiers Minimum Impedance Unbridged: 2 ohms

1500W Max, Evolution Series Monoblock Power Amplifier

• 600W x 1 Chan. @ 4 Ohms
• 1500W x 1 Chan. @ 2 Ohms
• Speaker Short Protection
• Soft Turn-On Circuit
• Nickel-Plated Terminals
• Variable Bass EQ

$69.99

OUT OF STOCK

600W Monoblock Class D XD Series Car Amplifier

• RMS Power: 600W x 1 @ 4 ohms, 1000W x 1 @ 2 ohms
• Variable Slope Low Pass Filter
• 1 Pair of Preamp Outputs
• Dimensions: 14-3/4" W x 7-1/8" D x 2" H

$419.95

OUT OF STOCK

1000W Max, Monoblock Gothic Series Car Amplifier

• RMS: 375W x 1 @ 4 ohms, 470W x 1 @ 2 ohms
• Total Peak Power: 1000W
• 1 Pair of Preamp Outputs
• Bass Boost: 0-18 dB
• Low Pass Filter: 40-150 Hz
• Dimensions: 9"L x 9-3/4"W x 2-3/10"H

25% off a 4 Gauge Amp Kit with Purchase

$79.95

OUT OF STOCK

250W RMS Monoblock Single Channel Class AB Prime Series Amplifier

• RMS: 150W x 1 @ 4 ohms, 250W x 1 @ 2 ohms
• Total RMS Power: 250W
• CEA-2006 Compliant
• Punch Bass: 0 to +12 dB
• Wired Bass Remote Included
• Dimensions: 11-1/4"L x 6-3/4"W x 2"H

$109.99

OUT OF STOCK

1100W RMS Monoblock Class D X-Power Series Car Amplifier

• RMS: 650W x 1 @ 4 ohms, 1100W x 1 @ 2 ohms
• Total RMS Power: 1100W
• CEA-2006 Compliant
• Bass Boost: 0-12 dB at 50 Hz
• Multi-Stage Power Management Circuit
• Dimensions: 9"L x 13-3/8"W x 2-1/4"H

$319.95

OUT OF STOCK

1200W RMS, PDX Series Monoblock Power Density Digital Amplifier

• RMS: 1200W x 1 @ 4 ohms, 1200W x 1 @ 2 ohms
• Total RMS Power: 1200W
• CEA-2006 Compliant
• 6-Layer Glass Epoxy PC Board and Compact Size
• Thermal Protection Circuitry
• Dimensions: 7-9/16"D x 10-1/8"W x 2"H

25% Off NVX XKIT42 4 gauge amp kit with Purchase!

$599.95

OUT OF STOCK

500W RMS Punch Series Monoblock Class BD Car Power Amplifier

• RMS: 150W x 1 @ 4 ohms, 300W x 1 @ 2 ohms, 500W x 1 @ 1 ohm
• Total RMS Power: 500W
• CEA-2006 Compliant
• Tuned Bass EQ: 0 to +18 dB
• Super Efficient Class BD Circuitry
• Dimensions: 11"L x 7-3/4"W x 2-3/8"H

25% Off NVX XKIT42 4 gauge amp kit with Purchase!

$249.95

OUT OF STOCK

500W RMS Class D Monoblock Amplifier

bull; 300W x 1 chan. @ 4 ohm
• 500W x 1 chan. @ 2 ohm
• 1000W x 1 chan. Max approx.
• MOSFET Power supply
• Bass EQ 0-12dB at 50Hz
• Continuously adjustable gain control
• Thermal management control

$199.99

OUT OF STOCK

1000W Monoblock Ground Pounder Class A/B Amplifier

• RMS Power: 500W x 1 @ 4 ohms, 1000W x 1 @ 2 ohms
• Variable Bass Boost
• Total Peak Power: 1000W
• 9.05"W x 13.93"L x 2.29"H

25% off 0/1 Gauge Amp Kit with Select Amplifiers!

$94.99

OUT OF STOCK

600W, Single-Channel Class D XD Series Subwoofer Monoblock Car Amplifier

• 600W x 1-Chan @ 2 Ohms
• NexD Ultra-High Speed Topology
• Preamp RCA Outputs
• Variable High/Low-Pass Filter
• 3-Way System Protection Circuitry
• Remote Bass Input

$359.95

OUT OF STOCK

1000W Max 1 Channel Monoblock Volt Series Class A/B Car Amplifier

• 250W RMS @ 4 ohms
• 355W RMS @ 2 ohms
• MOSFET Power Supply
• Variable Low-Pass Filter
• Built-In Subsonic Filter
• Variable Bass Boost
• 4-Way Protection Circuitry
• CEA-2006 Compliant

25% off a 8 Gauge Amp Kit with Purchase

$119.00

OUT OF STOCK

Class-D Monoblock 400W DRVN Series Single Channel Car Amplifier

• RMS: 250W x 1 @ 4 ohms, 400W x 1 @ 2 ohms
• Total Peak Power: 800W
• CEA-2006 Compliant
• Bass Boost: 0-18 dB
• 1 Pair of Preamp Outputs
• Dimensions: 8-15/16" W x 7-5/16" L x 2-1/8" H

25% off a 4 Gauge Amp Kit with Purchase

$119.95

OUT OF STOCK

500W RMS Monoblock eXcelon Series Digital Power Amplifier

• 4 ohms: 300 watts x 1 chan. • 2 ohms: 500 watts x 1 chan. • Max power output: 1000 watts x 1 chan. • • Mono Channel Operation

$134.99

OUT OF STOCK

500W RMS, Monoblock Class D JX Series Full-Range Car Amplifier

• Peak: 235W x 1 @ 4 ohms, 300W x 1 @ 3 ohms, 410W x 1 @ 2 ohms
• Total RMS Power: 410W
• Class D Circuitry
• Bass Boost: 0-12 dB
• Variable Slope Low-Pass Filter
• Dimensions: 7-3/4"L x 7-3/4"W x 2-1/8"H

$275.95

OUT OF STOCK

Class-D Monoblock 1000W DRVN Series Car Amplifier

• RMS: 300W x 1 @ 4 ohms, 500W x 1 @ 2 ohms
• Total Peak Power: 1000W
• CEA-2006 Compliant
• Bass Boost: 0-12 dB
• 1 Pair of Preamp Outputs
• Dimensions: 10-1/4" W x 11-13/16" D x 2-3/8" H

$119.99

OUT OF STOCK

1600W RMS KX Series Monoblock Class D Car Power Amplifier

• RMS: 800W x 1 @ 4 ohms, 1600W x 1 @ 2 ohms
• Total Peak Power: 3200W
• CEA-2006 Compliant
• Kick EQ+ Bass Boost: 0-18 dB from 20-80 Hz
• Magnetic Panel Covers Controls
• Dimensions: 8-5/16"W x 11-3/16"L x 2-1/8"H

FREE $150.00 SMD DD-1 Distortion Detector!

$729.95

OUT OF STOCK

Marine, M Series Monoblock Class D Amplifier

• 600W x 1-Chan @ 2 Ohms
• NexD Ultra-High Speed Topology
• Preamp RCA Outputs
• Variable High/Low-Pass Filter
• 3-Way System Protection Circuitry
• Remote Bass Input

$385.95

OUT OF STOCK

Related Categories

Amplifier Wiring Kits
Get all the cables, wires, and hardware you need to install your new car audio amplifier with one of these power amp kits. Amplifier wiring kits come with your basic power and ground cables, as well as other necessary wires. Select complete amplifier kits will include speaker wire, RCA interconnect cables, and more! To make sure you get the kit that is best designed for your car audio system, scroll down to the bottom of this page for the buying guide.
Capacitors
Car audio capacitors are a great addition to any aftermarket audio system that is in need of a little extra power. Capacitors store a temporary electrical charge that can be released during periods of extra power strain. If a vehicle has dimming headlights when music is played, a capacitor could solve that problem.
Sound Processors
For those who want the most out their car audio system, a quality sound processor is a must. After some slight adjustments, your systems will sound like it has been professionally tuned and optimized. Tune your system to perfection with these crossovers, equalizers, and bass drivers.

Monoblock Amplifiers Information

Mono Subwoofer Amplifiers

Mono amplifiers are single channel amps, but they can be used to power more than one subwoofer. Mono amps typically produce more power than multi-channel amps, which makes them ideal for powering subwoofers. Class D mono amps are the most efficient of all amplifier designs because they draw less current and as a result generate less heat in comparison to the classic mono amplifier design.

A mono amplifier puts out only one channel of sound, as opposed to a stereo amp that puts out two channels of sound. A mono amp is generally used for extremely low frequencies, such as bass, that are channeled into a single subwoofer. It doesn't matter that both stereo channels are combined for these low bass frequencies because you couldn't tell which channel the sounds are coming from anyway because you feel the sound pressure more than hear the sound.