Expert Service 1-877-289-7664 [Hours]

Sonic Closeout Sale

Monoblock Amplifiers Total Peak Power Output: 501 - 1000 watts, Minimum Impedance Bridged: Not Bridgeable

500W RMS Class D 1-Channel Monoblock Performance Series Car Power Amplifier

• RMS: 300 x 1 @ 4 ohms, 500W x 1 @ 2 ohms
• Total RMS Power: 500W
• CEA-2006 Compliant
• Bass Boost: 0 - 18 dB at 40 Hz
• Class D Circuitry
• Dimensions: 9-7/16"W x 7-9/16"L x 2-3/16"H

25% off a 4 Gauge Amp Kit with Purchase

$129.99

IN STOCK

900W Max Power Series Class AB Monoblock Amplifier with Black Gloss Finish

• RMS: 300W x 1 @ 4 ohms, 450W x 1 @ 2 ohms
• Total Peak Power: 3600W
• Wired Bass Remote Included
• Bass Boost: 0-12 dB
• High Current Bi-Polar Transistors
• Dimensions: 9"D x 15-3/4"W x 2-1/2"H

25% off a 4 Gauge Amp Kit with Purchase

$84.99

IN STOCK

Only 3 Left!

500W RMS Class D 1-Channel Monoblock Power Car Amplifier

• RMS: 300W x 1 @ 4 ohms, 500W x 1 @ 2 ohms
• Total Peak Power: 1000W
• 3-Way Protection Circuitry
• Selectable Bass Boost (0-6-12 dB)
• Class D Circuitry
• Dimensions: 6-5/16"W x 8-15/16"L x 2-1/4"H

Integrate an Amplifier in to your Factory System and Save!

$179.95

IN STOCK

1000W Mono Block Onyx Series Class D Amplifier

• RMS: 475W x 1 @ 4 ohms, 750W x 1 @ 2 ohms, 1000W x 1 @ 1 ohm
• Total Peak Power: 1000W
• Fluid-Fets MOSFET Power Supply
• Q-Stasis Pre-Amplifier Stage
• Heavy Duty Aluminum Alloy Heat-Sink
• Dimensions: 9.5"W x 11.26"L x 2.34"H

$129.99

IN STOCK

1000W Max 1 Channel Monoblock Volt Series Class A/B Car Amplifier

• 250W RMS @ 4 ohms
• 355W RMS @ 2 ohms
• MOSFET Power Supply
• Variable Low-Pass Filter
• Built-In Subsonic Filter
• Variable Bass Boost
• 4-Way Protection Circuitry
• CEA-2006 Compliant

25% off a 8 Gauge Amp Kit with Purchase

$119.00

IN STOCK

Only 2 Left!

924W Max 1-Channel Monoblock Class BR Punch Boosted Rail Amplifier

• RMS 75 x 1 @ 4 ohms, 150W x 1 @ 2 ohms, 300W x 1 @ 1 ohm
• Total Peak Power: 924W
• CEA-2006 Compliant
• Ultra Compact Chassis
• Boosted Rail Design
• Dimensions: 6-3/4"L x 4-1/4"W x 1-1/2"H

Maximize the Bass with a Digital Bass Restoration Processor!

$249.99

IN STOCK

1000W Monoblock Ground Pounder Class A/B Amplifier

• RMS Power: 500W x 1 @ 4 ohms, 1000W x 1 @ 2 ohms
• Variable Bass Boost
• Total Peak Power: 1000W
• 9.05"W x 13.93"L x 2.29"H

25% off 0/1 Gauge Amp Kit with Select Amplifiers!

$99.99

IN STOCK

900W Atom Series Monoblock Class D Car Amplifier

• RMS Power: 300W x 1 @ 4 ohms, 450W x 1 @ 2 ohms
• Total Peak Power: 900W
• Variable Low-Pass Filter (35-250 Hz, 24 dB/octave)
• Dimensions: 5"W x 7.2"L x 1.5"H

$139.99

IN STOCK

Only 2 Left!

D-Series 500W Monoblock Class D Car Amplifier

• RMS Power: 250W x 1 @ 4 ohms, 500W x 1 @ 2 ohms
• Signal to Noise Ratio: >95dB
• CEA-2006 Compliant
• >Dimensions: 8-1/8" W x 7-3/16" D x 2-3/8" H

Maximize the Bass with a Digital Bass Restoration Processor!

$229.95

IN STOCK

Only 2 Left!

500W Bomber Series Monoblock Class D Digital Amplifier

• RMS Power: 500W x 1 @ 2 ohms
• Total Peak Power: 1000W
• Ultra Compact High Density Aluminium Alloy Chassis
• Direct FET Power Mosfet Output Stage
• Dimensions: 4.02"W x 6.99"L x 1.4"H

Maximize the Bass with a Digital Bass Restoration Processor!

$229.99

IN STOCK

Only 1 Left!

400W Excelon Series Monoblock Class D Car Amplifier

• RMS Power: 400W x 1 @ 4 ohms, 600W x 1 @ 2 ohms
• Variable Low-Pass Filter (50-200 Hz, 24 dB/octave)
• CEA-2006 Compliant
• Dimensions: 8-11/16"W x 1-7/16"L x 8"H

Maximize the Bass with a Digital Bass Restoration Processor!

$249.99

IN STOCK

Only 2 Left!

Class-D Monoblock 400W DRVN Series Single Channel Car Amplifier

• RMS: 250W x 1 @ 4 ohms, 400W x 1 @ 2 ohms
• Total Peak Power: 800W
• CEA-2006 Compliant
• Bass Boost: 0-18 dB
• 1 Pair of Preamp Outputs
• Dimensions: 8-15/16" W x 7-5/16" L x 2-1/8" H

$119.95

OUT OF STOCK

400W RMS KX Series Monoblock Class-D Car Power Amplifier

• RMS: 200W x 1 @ 4 ohms, 400W x 1 @ 2 ohms
• Total Peak Power: 800W
• CEA-2006 Compliant
• Kick EQ+ Bass Boost: 0-18 dB from 20-80 Hz
• Magnetic Panel Covers Controls
• Dimensions: 8-5/16"W x 8"L x 2-1/8"H

$299.95

OUT OF STOCK

500W RMS Constant Power Series Class BD Monoblock Amplifier

• RMS: 300W x 1 @ 4 ohms, 500W x 1 @ 2 ohms, 500W x 1 @ 1 ohm
• Dynamic Power Output: 690W
• CEA-2006 Compliant
• Variable Bass Boost: 0 to +18 dB at 45 Hz
• Ultra Efficient Class bD Circuitry
• Dimensions: 11-7/16"L x 8-3/16"W x 2-3/16"H

$479.99

OUT OF STOCK

750W Max Class Q1 1-Channel Monoblock Onyx Series Amplifier

• Peak: 350W x 1 @ 4 ohms, 600W x 1 @ 2 ohms, 750W x 1 @ 1 ohm
• Total Peak Power: 750W
• 1 Pair of Preamp RCA Outputs
• Variable Bass Boost: 0 to +12 dB
• Class Q1 Circuitry
• Dimensions: 9-7/16"W x 15-3/4"D x 2-1/4"H

$119.95

OUT OF STOCK

Related Categories

Amplifier Wiring Kits
Get all the cables, wires, and hardware you need to install your new car audio amplifier with one of these power amp kits. Amplifier wiring kits come with your basic power and ground cables, as well as other necessary wires. Select complete amplifier kits will include speaker wire, RCA interconnect cables, and more! To make sure you get the kit that is best designed for your car audio system, scroll down to the bottom of this page for the buying guide.
Capacitors
Car audio capacitors are a great addition to any aftermarket audio system that is in need of a little extra power. Capacitors store a temporary electrical charge that can be released during periods of extra power strain. If a vehicle has dimming headlights when music is played, a capacitor could solve that problem.
Sound Processors
For those who want the most out their car audio system, a quality sound processor is a must. After some slight adjustments, your systems will sound like it has been professionally tuned and optimized. Tune your system to perfection with these crossovers, equalizers, and bass drivers. Click here to learn more about digital sound processors and to find out which type would be best for your car audio system.

Monoblock Amplifiers Information

Mono Subwoofer Amplifiers

Mono amplifiers are single channel amps, but they can be used to power more than one subwoofer. Mono amps typically produce more power than multi-channel amps, which makes them ideal for powering subwoofers. Class D mono amps are the most efficient of all amplifier designs because they draw less current and as a result generate less heat in comparison to the classic mono amplifier design.

A mono amplifier puts out only one channel of sound, as opposed to a stereo amp that puts out two channels of sound. A mono amp is generally used for extremely low frequencies, such as bass, that are channeled into a single subwoofer. It doesn't matter that both stereo channels are combined for these low bass frequencies because you couldn't tell which channel the sounds are coming from anyway because you feel the sound pressure more than hear the sound.