Garage
Shop

Discontinued Pyramid Tweeters

Loading...
Filters
Question Mark Icon of Question Mark
Refers to the size of the tweeter. Typically, smaller tweeters produces less output with higher frequency response.
Question Mark Icon of Question Mark
Designs such as cone, dome, semi-dome, balanced dome, and whizzer are most popular. Cone tweeters are simple, efficient and typically are the most reasonably priced. Dome tweeters are used in most home speakers, and provide a smoother and more accurate sound. Semi-dome design is one with a dome placed inside a cone. A Balanced dome driver is a semi-dome with equal reproduction area given the cone and dome portions of the driver. A whizzer tweeter is a separate tweeter cone driven by the voice coil of the woofer.
Question Mark Icon of Question Mark
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
Question Mark Icon of Question Mark
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
Question Mark Icon of Question Mark
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
  Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
Question Mark Icon of Question Mark
If the speaker or tweeter is flush mountable, then it can be installed flush to the mounting surface.

When installing a flush mount tweeter, make sure that there is enough room behind the mounting surface for the tweeter and magnet. Check the mounting depth with your specific vehicle.

Question Mark Icon of Question Mark
If the speaker or tweeter is surface mountable, then it can be installed to be raised above the mounting area.

When installing a surface mountable tweeters, make sure that there are no obstructions that will prevent the tweeter from being installed correctly.

Question Mark Icon of Question Mark
If the speaker or tweeter is able to be angle mounted, then the installed tweeter can be positioned at an angle. An angle mounted tweeter can improve the audible sound quality of your system.

When installing a angle mountable tweeters, make sure that there are no obstructions that will prevent the tweeter from being installed correctly.

Question Mark Icon of Question Mark
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.

Shop the Category

filter-icon Filters & Sort
You are currently viewing discontinued products.

Pyramid TW18

300W 3-1/4" Aluminum Bullet Horn Tweeters

Go to item page Right Arrow Icon of Right Arrow

300W 3-1/4" Aluminum Bullet Horn Tweeters

3-1/4” Bullet Horn Tweeter • 300W Max • 150W RMS • Aluminum horn tweeter • 1” Super tweeter • Capacitor crossover network & hardware • Ferrofluid enhanced • 4 or 8 Ohms impedance • 20oz. Magnet structure

3-1/4” Bullet Horn Tweeter • 300W Max • 150W RMS • Aluminum horn tweeter • 1” Super tweeter • Capacitor crossover network & hardware • Ferrofluid enhanced • 4 or 8 Ohms impedance • 20oz. Magnet structure

Pyramid TW28

300W, 3.75" Aluminum Bullet Horn Tweeters w/1" Titanium Dome Tweeters and Swivel Housing Enclosure

Go to item page Right Arrow Icon of Right Arrow

300W, 3.75" Aluminum Bullet Horn Tweeters w/1" Titanium Dome Tweeters and Swivel Housing Enclosure

1" Tweeter on 3.75" Bullet Horn • 300W Max • 120W RMS • Titanium tweeter • Ferrofluid cooling • Temperature resistant • 4 ohms impedance

1" Tweeter on 3.75" Bullet Horn • 300W Max • 120W RMS • Titanium tweeter • Ferrofluid cooling • Temperature resistant • 4 ohms impedance

Pyramid TW47

2" Die-Cast Aluminum Titainium Super Tweeter

Go to item page Right Arrow Icon of Right Arrow

2" Die-Cast Aluminum Titainium Super Tweeter

2" Titanium Super Tweeter • 600W Max • 300W RMS • Die Cast Aluminum Frame • Ferrofluid Enhanced • 1-1/2" High Temperature Kapton Voice Coil • Crossover Capacitor Included • 6oz. 4" Diameter Magnet Structure

2" Titanium Super Tweeter • 600W Max • 300W RMS • Die Cast Aluminum Frame • Ferrofluid Enhanced • 1-1/2" High Temperature Kapton Voice Coil • Crossover Capacitor Included • 6oz. 4" Diameter Magnet Structure

Pyramid TW46

1-1/2" Die-Cast Aluminum Titanium Super Tweeter

Go to item page Right Arrow Icon of Right Arrow

1-1/2" Die-Cast Aluminum Titanium Super Tweeter

1-1/2" Titanium Super Tweeter • 400W Max • 200W RMS • Die Cast Aluminum Frame • Ferrofluid Enhanced • 1.5" High Temperature Kapton Voice Coil

1-1/2" Titanium Super Tweeter • 400W Max • 200W RMS • Die Cast Aluminum Frame • Ferrofluid Enhanced • 1.5" High Temperature Kapton Voice Coil

Pyramid TW36

150W Max, 7" x 3" Wide Dispersion Horn Tweeters

Go to item page Right Arrow Icon of Right Arrow

150W Max, 7" x 3" Wide Dispersion Horn Tweeters

7" x 3" Wide Dispersion Horn Tweeters • 150W Max • Die cast metal black anodized frame • Light weight and low distortion • 4 ohms impedance

7" x 3" Wide Dispersion Horn Tweeters • 150W Max • Die cast metal black anodized frame • Light weight and low distortion • 4 ohms impedance

Pyramid TW67 (Priced Per Tweeter)

1000W Max, 3" Die-Cast Aluminum Titanium Super Tweeter

Go to item page Right Arrow Icon of Right Arrow

1000W Max, 3" Die-Cast Aluminum Titanium Super Tweeter

3" Titanium Super Tweeter • 1000W Max • 500W RMS • Die Cast Aluminum Frame • Ferrofluid Enhanced • 3" High Temperature Kapton Voice Coil

3" Titanium Super Tweeter • 1000W Max • 500W RMS • Die Cast Aluminum Frame • Ferrofluid Enhanced • 3" High Temperature Kapton Voice Coil

Pyramid TW47 Open Box Complete

2" Die-Cast Aluminum Titainium Super Tweeter

Go to item page Right Arrow Icon of Right Arrow

2" Die-Cast Aluminum Titainium Super Tweeter

• Open Box Complete
2" Titanium Super Tweeter • 600W Max • 300W RMS • Die Cast Aluminum Frame • Ferrofluid Enhanced • 1-1/2" High Temperature Kapton Voice Coil • Crossover Capacitor Included • 6oz. 4" Diameter Magnet Structure

• Open Box Complete
2" Titanium Super Tweeter • 600W Max • 300W RMS • Die Cast Aluminum Frame • Ferrofluid Enhanced • 1-1/2" High Temperature Kapton Voice Coil • Crossover Capacitor Included • 6oz. 4" Diameter Magnet Structure

Pyramid TW57

3'' 1,000 Watt Die-Cast Aluminum Titainium Super Tweeter

Go to item page Right Arrow Icon of Right Arrow

3'' 1,000 Watt Die-Cast Aluminum Titainium Super Tweeter

• 1000 Watts Max
• 3'' Die-Cast Aluminum Titainium
• 100 oz. Magnet Structure Weight
• 4-8 ohms Impedance

• 1000 Watts Max
• 3'' Die-Cast Aluminum Titainium
• 100 oz. Magnet Structure Weight
• 4-8 ohms Impedance

Pyramid TW36 OPEN BOX

150W Max, 7" x 3" Wide Dispersion Horn Tweeters

Go to item page Right Arrow Icon of Right Arrow

150W Max, 7" x 3" Wide Dispersion Horn Tweeters

7" x 3" Wide Dispersion Horn Tweeters • 150W Max • Die cast metal black anodized frame • Light weight and low distortion • 4 ohms impedance

7" x 3" Wide Dispersion Horn Tweeters • 150W Max • Die cast metal black anodized frame • Light weight and low distortion • 4 ohms impedance

    clear all
    why-shoping-with-sonic

    We love people and we're ready to help you! See what separates us from our competition.

    Take advantage of our VIP rewards like 10% back on your purchases, free 2-day shipping, extended warranties, and free returns! Gain access to all of these rewards without any membership fees.
    Get great discounted (and possibly FREE) installation accessories with most car stereo purchases. This includes dash kits, wiring harnesses and antenna adapters that you will need to properly install your new car stereo.
    We are an Authorized Dealer for all the brands we sell, including the most premium brands in car and marine audio such as Hertz, JL Audio, NVX, Rockford Fosgate, Kicker, Alpine, Kenwood and many more.
    Shop Deals and get up to 30% off premium brands! Shop Now! We are always looking out for the best products and deals to offer our customers. Don’t pay too much by shopping elsewhere!
    We have information on brands, gear, and more for you to explore! Check out our YouTube Channel for helpful how-to videos, product reviews, and Q&As. For a more detailed look, also visit our Learning Center!
    Our trained experts are here to assist you! They are just a phone call or click away to help you get the right gear for you and your vehicle!
    Why Shop With Us?
    ADVERTISEMENT
    Save up to 10 different vehicles in your garage

    Loading...
    Identify your vehicle and submodel details
    • Owner’s manual
    • Vehicle’s insurance card
    • Vehicle registration
    • Vehicle produced after 2005: Inside driver’s side door
    • Vehicle produced before 2005: Rear passenger doorjamb, glove box, center console, or engine compartment
    Car Info Side Door Icon
    Vehicle Registration Icon
    Vehicle Insurance Icon