Key Benefits
- 12" Dual 4 ohm Shallow Mount Prime Stage 2 Series Subwoofer
- Power Handling:
- Peak: 500 watts
- RMS: 250 watts
- CEA-2031 Compliant
- Klippel Verified
- Shallow Motor Assembly
- 12 AWG compression terminals
- Optimized for sealed enclosures
- Mica injected polypropylene cone
- StampCast basket with integrated spider venting
- Linear spider with embedded 16 AWG tinsel leads
- Unique low profile "inset" design, high excursion woofer
- High density compressed half-roll sealed poly-foam surround
- Proprietary attached tear & fatigue resistant poly-cotton spider
- Suited for sealed enclosure applications, capable for use in vented boxes as well
- Optimized motor magnetics with extended pole and bumped vented backplate
- Fatigue resistant and reduced strain "stitched on" flexible lead wire design
- Multi-point high-temp/high-strength neck joint bonding technique
- High temp copper voice coil with aluminum former
- All metal compression input terminal assembly
- Semi-flexible PVC integrated trim ring
- Heavy guage stamped steel frame
- Mounting Depth: 3.602"
- Cutout Diameter: 11.25"
- Magnet Weight: 51.0 oz
- Frequency Response: 43 - 250 Hz
- Xmax: 10 mm
- Sensitivity: 85 dB @ 1 watt / 1 meter
- Recommended Ported Enclosure: 1.79ft³ @40.0Hz
- Recommended Sealed Enclosure: 0.90ft³ @44.1Hz
- Authorized Internet Dealer
- 1-year Manufacturer's Warranty
Priced Individually
Check out the Rockford Fosgate R2SD4-12 Data Sheet
Rockford Fosgate Punch PBR500X1
500 Watts Punch Series Boosted Rail Compact Monoblock Amplifier
Quantity: 1
General Features:
- Punch Series BR Monoblock Car Amplifier
- RMS Power Rating:
- 4 ohms: 175 watts x 1 chan.
- 2 ohms: 300 watts x 1 chan.
- 1 ohm: 500 watts x 1 chan.
- Features Rockford Fosgate's Class-BR Topology
- CEA-2006 compliant amplifier
- Ultra compact chassis
- MOSFET output stage
- Boosted Rail amp technology
- Convection cooling design
- Extruded aluminum heat sink
- Low level RCA input connection
- High level speaker input connection
- 12dB / Octave Butterworth crossover
- Detachable Compression Terminals
- LED power (blue) and protect (red) indicators
- Variable 4-6 volt hi level DC offset voltage input turn-on control
- Features MEHSA3 (Maximum Efficiency Heat Sink Application - gen. 3)
- Perfect for smaller stealth installations
- Great for motorcycles and recreational vehicles
- Optional Remote Punch EQ provides 0dB to +18dB @ 45Hz
- Wiring w/ Mounting Plate for Harley-Davidson Motorcycles Available: Rockford Fosgate RFKHD9813
- 12 Gauge speaker wire output terminals
- 8 gauge OFC power and ground wiring is recommended for installation.
- 1-year Manufacturer's Warranty
Amplifier Specifications:
- Input sensitivity:
- Low level: 150mV - 4V
- High level: 400mV - 11V
- Operating voltage: 9 - 16 VDC
- Recommended fuse rating: 60 A x 1
(not included) - Max. current draw (13.8V Sinewave): 60 A
- Average current draw (13.8V Music): 30 A
- Frequency response: 20 - 250 Hz, +/- 3 dB
- Total harmonic distortion: <1.0%
- Signal to Noise Ratio: ≥105 dB
- CMRR: >55 dB @ 1 kHz
- Damping Factor: >200
- Crossover controls: 35 - 250 Hz Low Pass @ 12dB/Octave
- CEA-2006 Power Rating: 175W x 1 @ 4Ω ≤1.0% THD+N
- Weight: 3.30 lbs
- Dimensions: 8.25"L x 4.25"W x 1.53"H
Check out the Rockford Fosgate Punch PBR500X1 Owner's Manual
Check out the Class-BR Amplifier Installation Advisory From Rockford Fosgate
General Features:
- 8 Gauge Amplifier Installation Kit
- Designed specifically for car audio systems up to 400 watts
- Premium power and ground wire provides optimal power transfer
- Made from 100% oxygen-free copper for a pure uninterrupted transfer of power
- Includes 2-channel RCA interconnect cables for the audio signal connection from the receiver to the amplifier
- RCA Interconnects are made with twisted-pair technology for noise reduction
- Terminals are nickel-plated for excellent signal transfer
- AGU Fuse holder offers ideal protection for lower powered systems
- True-to-Gauge cables/wires meet or exceed the industry standard of copper required for the gauge size
Package Includes:
- 17 feet of 8 AWG power wire
- 3 feet of 8 AWG ground wire
- 20 feet twisted pair RCA
- AGU fuse holder
- 20 feet of remote wire
- 60 Amp fuse
- Cable Ties
- Butt connectors
- Spade Terminals
- Firewall Grommet