|
Key Benefits
- 12" Dual 2 ohm Punch Stage 2 Subwoofer
- Power Handling:
- Peak: 800 watts
- RMS: 400 watts
- Recommended power range: 300 - 500 watts RMS
- CEA-2031 Compliant
- Klippel Verified
- Flex-fit™ Mounting pattern
- Proprietary spider venting/cooling technique
- StampCast basket with integrated spider venting
- Sturdy 16 gauge compound bend frame geometry
- High modulus Kevlar™ re-inforced paper-pulp cone
- Semi-flexible, PVC removable protective motor cover
- Multi-point high-temp/high-strength neck joint bonding technique
- Tall-profile VAST™ Santoprene™ surround for larger surface area
- Dual tear & fatigue resistant poly-cotton spider with woven tinsel leads
- Fatigue resistant and reduced strain "stitched on" flexible lead wire design
- Proprietary all metal, radially oriented compression input terminal assembly
- Optimized motor magnetics with extended pole and bumped vented backplate
- High temp 2.25" voice coil w/ spun-laced Nomex™ insulating re-inforcement collar
- Die-Cast aluminum soft-touch painted trim ring allows for optional integrated grill
- Stamped Mesh Grille Insert Available: Rockford Fosgate P2P3G-12
- Mounting Depth: 6.40"
- Cutout Diameter: 11.22"
- Magnet Weight: 72.80 oz
- Frequency Response: 26 - 250 Hz
- Xmax: 13.3mm
- Sensitivity: 86 dB @ 1 watt / 1 meter
- Recommended Ported Enclosure: 1.79ft³ @40.0 Hz
- Recommended Sealed Enclosure: 1.02ft³ @44.9 Hz
- Matching Amplifiers: (one driver)
- Rockford Fosgate P500X1BD, Parallel @1ohm
- Rockford Fosgate R1200-1D, Series @4ohms
✔ Preferred Match - Rockford Fosgate P500X2 (bridged), Series @4ohms
- Matching Amplifier: (two drivers)
- Rockford Fosgate R1200-1D, Series/Parallel @2ohms
- Authorized Internet Dealer
- 1-year Manufacturer's Warranty
Priced Individually
TS Parameters
- Fs (Hz): 26.0
- Re (Ohms): 3.30
- Le (mH): 3.7
- Qts: 0.52
- Qes: 0.56
- Qms: 6.50
- Cms (mm/N): 0.18
- Vas (L): 81.5
- Mms (g): 212.0
- Mmd (g): 204.2
- Rms (kg/s): 5.3
- Airload (g): 7.8
- No (%): 0.24
- SPL (dB - 1W/1M): 86.0
- BL (T*M): 14.3
- *Xmax10 (mm): 13.3
- Sd (cm2): 570
- EBP: 46
- Krm (mOhms): 0.59
- Erm: 1.26
- Kxm (mH): 29.7
- Exm: 0.79
- Rem (Ohms): 36.02
*All parameters are derived using a laser velocity measurement method and verified with actual measured Mmd and Re. All dual voice coil models are wired in series. Xmax10 represents actual effective excursion at <10% THD.
**Specifications subject to change without notice.
For more information on the Thiele and Small Parameters, visit our T/S Parameters Article
Check out the Rockford Fosgate P2D2-12 Owner's ManualGeneral Features:
- BB Series 2-Channel Class AB Car Amplifier
- RMS Power Rating:
- 4 ohms: 170 watts x 2 chan.
- 2 ohms: 300 watts x 2 chan.
- Bridged: 600 watts x 1 chan.
- Max power output: 1500 watts
- Pulse Width Modulated MOSFET power supply
- LED power (green) and protect (red) indicators
- High-level speaker inputs
- 2 or Mono channel operation
- Preamp RCA outputs to daisy chain multiple amps
- Heavy duty aluminum alloy heat-sink
- 3-way protection circuitry (thermal, overload, and speaker short protection)
- Nickel plated RCA, Speaker and Power connections
- Input sensitivity: 200mV - 5V
- Selectable crossover modes: LPF / FULL / HPF
- Variable high-pass filter: 50 - 250 Hz, 24 dB/octave
- Variable low-pass filter: 50 - 250 Hz, 24 dB/octave
- Total Harmonic Distortion (THD): <1.0%
- Frequency response: 15-20,000 Hz
- Signal to Noise Ratio: 86dB @ 1W
- Fuse Rating: 30 A x 2
- 4 gauge power and ground wiring is recommended for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier. Click Here for our contact information.
- Dimensions: 12.25"W x 8"D x 2.25"H
- Authorized Internet Dealer
- 1-year Manufacturer's Warranty