Install a new car stereo and retain factory amplifier in select 1998-2008 vehicles from Ford, Lincoln
Product highlights
• Direct Connection to the factory harness
• Color coded wires for easy installation
• No cutting or splicing required
Please use our Fitment Guide to determine specific compatibility for the submodel and audio features
Best selling similar products
Crux DKGM-49 Stereo Replacement Interface
• Stereo Replacement Interface with Dash Kit
• Fits select 2006-2020 vehicles from GMC, Chevrolet, Buick Vehicles
• Accommodates ISO Double DIN Mount
• Retain steering wheel controls and chime functions
(41)
$129.60
List price $201.60
• Direct connection to the factory radio harness
• Color coded wires for easy installation
• No cutting or splicing required
(97)
$5.99
List price $6.99
iDataLink Maestro RR Interface Module
• Universal stereo replacement interface module
• Connects to iDataLink-compatible stereos
• Retains SWC, voice commands, etc.
• Enhances multimedia experiences with exclusive gauges, vehicle info, parking assistance, climate control, and radar detection
(35)
$189.99
List price $229.99
• Direct Connection to the factory harness
• Color coded wires for easy installation
• No cutting or splicing required
(51)
$12.99
List price $6.99
• Direct connection to the factory harness
• Color coded wires for easy installation
• No cutting or splicing required
(12)
$152.99
List price $379.00
• Direct Connection to the factory harness
• Color coded wires for easy installation
• No cutting or splicing required
(56)
$9.95
List price $6.99
iDataLink Maestro RR2 Interface Module
• Advance stereo replacement interface for select vehicles
• Offers exclusive infotainment retention
• Adds support for additional vehicles
• Enables Bluetooth programming directly from mobile device
• Retains OnStar, SYNC, Uconnect, and more
(5)
$259.99
List price $319.99
• Direct Connection to the factory harness
• Color coded wires for easy installation
• No cutting or splicing required
(246)
$7.95
List price $8.99
• Direct Connection to the factory harness
• Color coded wires for easy installation
• No cutting or splicing required
(63)
$9.95
List price $6.99
• Provides 12-Volt accessory power (RAP)
• Designed for non-amplified and amplified models
• Retains balance and fade
• Pre-wired for steering wheel audio controls
(25)
$99.99
List price $299.00
Manufacturer:
Model Number:
FDK13B
Weight:
0.19lbs
Internal SKU:
fdk13b
Internal Product ID:
14392
| 5 star |
|
81% |
| 4 star |
|
13% |
| 3 star |
|
0% |
| 2 star |
|
6% |
| 1 star |
|
0% |
| Durability | ||
| Value | ||
| Features | ||
| Design | ||
| Usability |
Does the job
I didn't need many of the features of this wiring kit since I removed the entire Ford Mach stereo system from my car. I only needed the basic harness and it worked as intended.
23 found this helpful
Easy to install
Just follow the directions and you can't go wrong.
23 found this helpful
Its ok
It works for what it is meant to be used for, to run the stock amps in a ford, the wiring could be a bit better. You have to read the sides of the wires to figure out where they go as the diagram that is supplied only covers the other harness. Overall good product.
22 found this helpful
No catches... Cheapest prices...
I had went down to the local stero shop and asked for a specific harness and dash kit, the counter person gave me a kit and told me that this is exactly what I needed.. Got home and tore my car apart to install my new deck .... Turns out the kit was for a different car "happens all the time" that's why online is the way to go + this web site is the cheapest I found by far, and they don't charge shipping! Keep doing what you guyz do!
19 found this helpful
Nice Product!
Cheap, shipped fast, just what I needed.
16 found this helpful
the right fit
no guess work perfect fit great instructions
17 found this helpful
lincoln ls, 02
Works great, clips in and stays in tight which I'm very happy about it because the wiring has to be tucked away pretty far for an in-dash double din haha. I didn't end up using the stock amp for long because i removed the amps and replaced them but while i did use it, it worked flawless.
17 found this helpful
Just what I needed
Used this one for my Ford Escape 2003 Limited. Didn't know before that my car already has a sub-woofer and amp and the special connector in the kits is exactly what I need. Just one thing to mention. There is one control wire for turning on the sub-woofer amp. Depending on the radio unit, you may need a 1k series resistor to eliminate the turn-on noise.
16 found this helpful
great accessory
This also came along with the radio for my car and made it so easy to install it. I would recommend this item.
13 found this helpful
• Direct Connection to the factory harness
• Color coded wires for easy installation
• No cutting or splicing required
(2)
$36.99
List price $41.99
• Direct Connection to the factory harness
• Color coded wires for easy installation
• No cutting or splicing required
(8)
$10.99
List price $12.99
4-Channel, Professional UHF Wireless Microphone System
(2)
$449.00
List price $629.00
Digital Bass Driver/Restoration Processor with Parametric Bass Control
(12)
$59.99
List price $159.99
Modern vehicles often require specific brackets, wiring harnesses, and mounting solutions. A fit guide ensures:
Whether you're replacing a factory stereo or upgrading your entire audio system, the Fit Finder eliminates uncertainty.
