Garage
Shop

Eclipse XA1200

600W Max, XA Series Class D Monoblock Car Amplifier (XA-1200)

Eclipse
Shop all Eclipse
Product videos
highlight-star-icon

XA Series Class D Monoblock Car Amplifier • 350 Watts x 1 Chan. @ 4 Ohms • 500 Watts x 1 Chan. @ 2 Ohms • 600 Watts • Variable Low-Pass Filter • ICEpower Design • CEA-2006 Compliant • LED Power Indicators

Learn more about the xa1200

We apologize

This item has been discontinued

Product Highlights


XA Series Class D Monoblock Car Amplifier • 350 Watts x 1 Chan. @ 4 Ohms • 500 Watts x 1 Chan. @ 2 Ohms • 600 Watts • Variable Low-Pass Filter • ICEpower Design • CEA-2006 Compliant • LED Power Indicators

Description


Eclipse ICEpower

Following the long tradition of award winning electronics, Eclipse introduced their highly innovative amplifiers. The Eclipse XA1200 monoblock amplifier follows strictly that tradition and the result is an incredibly efficient amplifier made for subwoofers. This single channel amp is designed and engineered specifically with the intent to push a subwoofer clearly, efficiently, and without the distortion that other amplifiers produce. Using Eclipses latest technology, the XA1200 features ICEpower. This means that the amplifier produces superior audio quality, is housed in a compact case, reduced energy demand, and amplifier reliability. Heat is kept low with the digital processors inside the amplifier, resulting in an increased power output. The amp is quite small when compared to how much wattage that it is able to produce. At 4 ohms, the XA1200 produces 350 watts and 500 watts at 2 ohms. That is more than enough wattage for any entry-level system, up to a high-end advanced system. The package includes a bass level remote so the user can adjust the bass level from the front seat without having to adjust any setting on the amplifier itself.

SonicElectronix.com is offering an online special with these amps and we are passing the saving on to you! We have drastically reduced prices on these incredible amplifiers. If you are looking to install a new subwoofer in your vehicle, then consider the Eclipse XA1200 to power that subwoofer. With a deal this good, it is hard to pass up the opportunity.

Product Features:
  • XA Series Class D Monoblock Car Amplifier with ICE Technology
  • RMS Power Rating:
    • 4 ohms: 350 watts x 1 chan.
    • 2 ohms: 500 watts x 1 chan.
  • Max power output: 600 watts
  • MOSFET switching power supply
  • ICEpower class D design
  • Wired remote bass level control included
  • LED power indicators
  • Bass Boost (0-8 dB at 50 Hz)
  • Bass boost frequency selection (32-64 Hz)
  • Mono channel operation
  • Protection temperature (90 C)
  • Heavy duty aluminum alloy heatsink
  • RCA level inputs
  • Screw terminals
  • Variable low-pass filter (40-200 Hz, Linkwitz Riley 18 dB/octave)
  • Subsonic Filter (18 dB at 20 Hz)
  • CEA-2006 compliant amplifier
  • Frequency response: 20-20,000 Hz
  • Input sensitivity: 1.2V-8V
  • Damping Factor: 90
  • Dimensions: 10-1/4"L x 10-1/8"W x 2-3/8"H
  • 4-gauge power and ground wiring is required for installation. Contact us for information regarding a discount on select amplifier kits when purchased together with this amplifier.
  • 1-year SonicElectronix.com warranty
You can learn more about the XA1200 at our blog.

Product history:

Eclipse XA1200 thumbnail
(newest, current model)
Eclipse XA1000 thumbnail
(previous model, replaced by Eclipse XA1200)

Specifications & Details


Power Specifications - Full Range Channels
RMS Power @ 4 ohms
350 watts x 1 channel
RMS Power @ 2 ohms
500 watts x 1 channel
Amplifier Specifications
Amplifier Class
D
Number of Channels
1 - Mono
Total Peak Power Output
600 watts
Total RMS Power Output
500 watts
Maximum Input Gauge Size
4 AWG
Minimum Impedance Unbridged
2 ohms
THD at Rated RMS Power
1%
Speaker Level Inputs
No
Preamp Outputs
No
Built-in Crossover
Low-Pass (LP)
Low-Pass Crossover Frequency
40 - 500 Hz
Subsonic Filter
20 Hz
Signal-to-Noise Ratio
80 dB
Bass Boost
0 - 8 dB
Remote bass/level controller
Yes
Fuse Rating
40A x 2 
Warranty and Return Policy
Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Sonic Electronix

Item Details


Manufacturer:

Model Number:

XA1200

Weight:

9.50lbs

Internal SKU:

xa1200

Internal Product ID:

17801

Product and How-to Videos


Customer Ratings & Reviews



5 star
76%
4 star
15%
3 star
3%
2 star
3%
1 star
3%



Durability
4.6
Value
4.8
Features
4.4
Design
4.9
Usability
4.8

Customer Reviews

Sort by:

Loading...

GREAT Amp

For the power class it is in, this amp is more than great. I'm sure amps with the same juice that cost much more money are on the same plain with it. Believe me, you will not find a better amp for the money. With my amp in the middle on my gains, filters, and frequencies, it does more than the job needed. This great deal at sonic is what got me to get it, and well worth it. What more can you expect from Eclipse... a great quality brand that is made in JAPAN. Not china or vietnam or mexico in a sweatshop, JAPAN. This amp is quality and I have had it for a while and it is showing no signs of wearing down.

By E30zen on June 8, 2010

15

found this helpful.

always cold, ALWAYS working

Ive had this for about 4 months now (+ an Eclipse ea4200 4 chan) - and it runs ice cold at full power. Seriously, while my buddies' amps are going into protection mode this one will push full power for EVER - no problems evvvver.

Its also underrated. 500 rms? Trust me I blew out my Clarion srw1251 and I wouldn't be surprised if I blow out my Fosgate P3. (my fault of course)
It even lists in the manual that it does 600 rms at higher THD.

This is about the only thing in my whole car's system that has not in any way disappointed. Its also way way WAY cheaper than it should be. Get it

By matt on June 25, 2010

14

found this helpful.

Great buy

Great sound quality, very efficient, and cheap.

By Ted of Smeg on January 6, 2010

14

found this helpful.

Fantastic amp

I had this in my 01 eclipse spyder and it sounded so good that someone broke into it and stole it, I'm pretty sure they like it too cause they never returned it. True story, and I've got pictures to prove. But I was extremely happy of the quality and looks it had, best of all the entire radio system matched the car name, both amps, 4 interior speakers, 2 subs, and 2 capacitors. Very good deal, I would highly recommend the fujitsu eclipse name.

By Tiller miller on August 31, 2010

12

found this helpful.

Excellent amp!

I purchased this amp to power my Eclipse SW9102 titanium subwoofer. Though the subwoofer can handle twice as much power as I'm feeding it, this one 10" sub rumbles like mad with this amp! I definitely recommend this amp and recommend sonicelectronix to anyone looking for a great deal with super fast shipping even overseas. Thank you!

By Donald on June 22, 2010

12

found this helpful.

Eclipse XA1200

It's a great amp for my needs. It has 60 watts x 4 channels and it is great for all my needs. Plus i also have an eclipse one channel mono bass amp for my box as well. Hope this helps all of you out there

By cool runner on June 16, 2010

12

found this helpful.

Great value, but not the amp I expected

The amp is good but I have one problem with it. In order to get the most power out of it, and to even hear the subs whatsoever, you have to have the bass boost all the way up. If bass boost isn't on, you can't hear the subs at all, but when it is up, it really pushes the subs and sounds great. I know this amp will really last a long time. Well built.

By Matt on May 31, 2010

12

found this helpful.

good buy

signal source 8 volts from eclipse 7200mkii. hooked to cliff designs 10 in a slot port enclosure @ 2ohms ran it for an hour or so never really got warm. Was impressed. Seems to hold true to 500 watt rating, overall very happy with product and sonic as always!

By mike on May 29, 2010

12

found this helpful.

Maybe I got a Bad One... But it Sucked!!

OK.. a little back specs for you.. Running a single 12" Kicker Solo DVC (Dual 4ohms) @ 2 Ohms. Running a Kicker 250.2 Wired to 2 Ohms.. Basically, im barely pushing the sub.. So I was looking for an Inexpensive upgrade and Ran into this Amp. Reviews looked good Except for 1 person saying it didn’t push his sub as hard as his smaller amp did. So, I pulled the trigger and when it arrived.. Installed in immediately.

Now the Bad news.. The amp didn’t even push the sub as much as the 250.2. I cranked up the Levels and the Bass Gain.. Nothing.. Verified that the Amp was getting enough Volts (14.38), Verified the RCA signal was good, and Re-Ohmed out the Sub with a Multimeter. Basically Nothing... The amp was horrible and just busted my bubble. Im hoping that that I just got a bad amp. Everyone but 1 person worked fine. My recommendation would be to be very cautious about the Amp..

By Timothy on May 24, 2010

12

found this helpful.

very good amp

one of the best amps for the price... to bad it was only limited quantity

By Travis on August 6, 2010

11

found this helpful.

Add-ons


Similar Products

Best selling similar products

Alpine MRV-M500

• 300 watts x 1 channel @ 4 ohms
• 500 watts x 1 channel @ 2 ohms
• Total RMS Power: 500 watts
• Class D 2 ohms Stable Monoblock Amplifier

(38)

$164.95

NVX VAD17001

• RMS: 800 x 1 @ 4 ohms, 1350W x 1 @ 2 ohms, 1700W x 1 @ 1 ohm
• Total RMS Power: 1700W
• CEA-2006 Compliant
• Wired Bass Remote Included
• Efficient Class D Design
• Dimensions: 10.1"W x 5.4"D x 2.0H

(28)

$214.99

JL Audio JD1000/1

• 600 watts x 1 channel @ 4 ohms
• 1000 watts x 1 channel @ 2 ohms
• Total RMS Power: 1000 watts
• Class D 2 ohms Stable Monoblock Amplifier

(2)

$399.99

Kicker CXA1800.1 (46CXA18001T)

• 900 watts x 1 channel @ 4 ohms
• 1800 watts x 1 channel @ 2 ohms
• 1800 watts x 1 channel @ 1 ohm
• Total RMS Power: 1800 watts
• Class D 1 ohms Stable Monoblock Amplifier

(10)

$399.96

Crunch GP-3500.1D

• 875 watts x 1 channel @ 4 ohms
• 1750 watts x 1 channel @ 2 ohms
• 3500 watts x 1 channel @ 1 ohm
• Total RMS Power: 3500 watts
• Class D 1 ohms Stable Monoblock Amplifier

(6)

$99.99

Related Searches


XA1200 small

Item added to your cart.

Price: $179.99

Essential add-ons
Belva BAK42

Complete 2-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire

$59.99

$34.99

Add to cart
Belva BAK42BK

Complete 2-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire

$59.99

$34.99

Add to cart
Belva BAK42BL

Complete 2-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire

$59.99

$34.99

Add to cart
InstallBay AK4ANL

Complete 2-Channel 4 Gauge Amp Kit with RCA Cables and ANL Fuse Holder

$49.99

$29.99

Add to cart
Stinger SS1200XS

Complete 2-Channel 4 Gauge Amp Kit with RCA Cables and Speaker Wire

$119.00

$52.99

Add to cart
NVX XAPK4

4 Gauge 100% (OFC) Oxygen Free Copper Amplifier Power Wiring Kit with Speaker Wire

$114.99

$84.99

Add to cart
Stinger SK4241

4 Gauge Power Amplifier Installation Kit

$129.00

$64.99

Add to cart
Stinger SK6241

4 Gauge Power Amplifier Installation Kit

$159.00

$79.99

Add to cart
NVX XLCA2X

2-Channel Line Out Converter

$159.99

$79.99

Add to cart
NVX XLCA2

2 Channel Line Out Converter with xBOOST

$62.49

$49.99

Add to cart
NVX XBBR2

Looking to fine tune the bass in your vehicle? Look no further

$149.99

$69.99

Add to cart
The Epicenter - Black

Maximize Your Bass Potential with an Audio Control’s legendary Bass Restoration Processor

$149.00

$149.00

Add to cart
NVX XIV25 V-Series 2-Channel RCA Cable

16.4 ft of V-Series 2-Channel RCA Audio Premium Interconnect Cable with Dual Twisted Pair Hyper-Flex Technology

$18.99

$12.99

Add to cart
NVX XWS1625 Speaker Wire

25 ft. of True 16 Gauge 100% Copper EnvyFlex Speaker Cable/Wire

$29.99

$19.99

Add to cart
12 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)

12 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)

$14.99

$6.99

Add to cart
16 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)

16 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)

$24.99

$12.99

Add to cart
80 Amp Smart Relay Isolator (XSBI80)

Smart isolator - Monitors and auto-charging feature!

$49.99

$24.99

Add to cart
80 Amp Relay Isolator (BIR80)

Great for isolating a second batter making it dedicated to the stereo system

$19.99

$14.99

Add to cart
200 Amp Smart Relay Isolator (XSBI200)

Smart isolator - Monitors and auto-charging feature!

$79.99

$54.99

Add to cart
500 Amp Smart Relay Isolator (XSBI500)

Smart isolator - Monitors and auto-charging feature!

$99.99

$74.99

Add to cart
500 Amp Relay Isolator (BIR500)

Does not create a voltage drop to the second battery like conventional isolators

$89.99

$65.99

Add to cart
NVX XCAP1F

True 1.0 Farad 20V Capacitor with Digital Read-out, Built-in Distribution Block

$124.99

$89.99

Add to cart
Belva BB1D

1.0 Farad Capacitor with Digital Red Display for up to 1000W Max

$79.99

$34.95

Add to cart
Belva Nine Function Digital Multimeter

Perfect for any installation and troubleshooting

$29.99

$9.99

Add to cart
Six Function Digital Multimeter

Perfect for every toolbox

$14.99

$6.99

Add to cart
Steve Meade Designs IM-SG

Impedance Meter / Signal Generator

$461.99

$451.99

Add to cart
SMD DD-1 Distortion Detector

Set your gains like a Pro, accurately and quickly

$207.99

$199.99

Add to cart
SMD CC-1 Crossover Calibrator

This is a must have! Set your crossover frequency like a Pro

$195.99

$192.99

Add to cart
Universal Positive/Negative 1/0 or 4 Gauge Battery Terminal

Make installation a breeze with the XBTU

$24.99

$16.99

Add to cart
World's Smallest AFS / Mini ANL Fuse Holder

Accepts 4 gauge or 8-gauge wire

$19.99

$10.99

Add to cart
4/8 Gauge Mini ANL (MANL, AFS) Fuse Holder

4/8 Gauge Mini ANL (MANL, AFS) Fuse Holder

$9.99

$6.99

Add to cart
High Quality Element Resistant AGU Fuse Holder

Belva BAGUH2 AGU Fuse Holder

$9.99

$4.99

Add to cart
4/8 Gauge AGU Fuse Holder

4/8 Gauge AGU Fuse Holder

$9.99

$6.99

Add to cart
Modular Linkable ANL Fuse Block

Modular Linkable ANL Fuse Block

$59.99

$16.99

Add to cart
ANL/Mini-ANL Fuse Holder with 1/0 or 4 Gauge Input and Output

No-fail termination and current flow, it helps keep your system protected and running smoothly

$24.99

$13.99

Add to cart
4/8 Gauge Mini-ANL/MANL/AFS Fuse Holder

4/8 Gauge Mini-ANL/MANL/AFS Fuse Holder

$9.99

$8.99

Add to cart
4 Pack of 80 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 80A Nickel Plated Fuses

$8.99

$3.99

Add to cart
4 Pack of 100 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 100A Nickel Plated Fuses

$8.99

$3.99

Add to cart
2 Pack of 100 Amp Nickel-Plated ANL Fuse

ANL 100A Nickel plated for better power transfer

$7.99

$3.99

Add to cart
2 Pack of 200 Amp Nickel-Plated ANL Fuse

Two fuses per order. High quality 200 Amp ANL Fuses

$7.99

$3.99

Add to cart
2 Pack of 300 Amp Nickel-Plated ANL Fuse

Two fuses per order. High quality 300 Amp ANL Fuses

$7.99

$3.99

Add to cart
Gauge Reducer, 4 Gauge Input to 8 Gauge Pin

Great for amplifiers that do not accept a large gauge power wire

$14.00

$9.99

Add to cart
Pair of 4 Gauge Spade Terminals, #8 Opening

Spade Terminals • 4 Gauge • 1 Red & 1 Black • Nickel Plated

$3.99

$1.99

Add to cart
4 Gauge Ring Terminals with 3/8" Opening (5 Pieces)

4 Gauge Ring Terminals with 3/8" Opening (5 Pieces)

$9.99

$2.99

Add to cart
5 Pack of Black 4 Gauge Ring Terminals

5 Pack of Black 4 Gauge Ring Terminals

$6.99

$3.99

Add to cart
(4-pack) 4 Gauge Solid Copper Ring Terminals with Shrink Tubing

(4-pack) 4 Gauge Solid Copper Ring Terminals with Shrink Tubing

$9.99

$9.99

Add to cart
Save up to 10 different vehicles in your garage

Loading...
Identify your vehicle and submodel details
  • Owner’s manual
  • Vehicle’s insurance card
  • Vehicle registration
  • Vehicle produced after 2005: Inside driver’s side door
  • Vehicle produced before 2005: Rear passenger doorjamb, glove box, center console, or engine compartment
Car Info Side Door Icon
Vehicle Registration Icon
Vehicle Insurance Icon