Garage
Shop

(2) Alpine SWX-1043 10" Subs + Hifonics BRZ1700.1D Amp

Pair of 10" Dual 4 Ohm SWX Series Subwoofers and a 1700W RMS Hifonics 1-Channel Monoblock Amplifier

Alpine
Shop all Alpine
EXCLUSIVE
highlight-star-icon

Brutus Series Monoblock Class D Car Amplifier • 1700W x 1-Chan. @ 1 Ohm • 1200W x 1-Chan. @ 2 Ohm • Wired HFR-3 Remote • 4-Way System Protection • Two 10" Dual 4 ohm Type-X Series Subwoofers • Kevlar-Rohacell® Parabolic Cone

Learn more about the brz17001d_2-swx1043d

We apologize

This item has been discontinued

Description


Alpine brand icon

Authorized dealer

Distinguished Output

Performance is something we're all interested in. With better performing components in your vehicle, you'll have more efficiency for higher powered applications. No one likes to have to wait for their amplifier to catch up with their demand for music. Take a stand against inferior efficiency with this exclusive combination package from Sonic Electronix.

The included Hifonics BRZ1700.1D amplifier provides high power output for any subwoofers that dare think they can handle it. The 10" Alpine Type X subwoofers packaged in this combo answer the call with an impressive 1000 watts of power handling for each subwoofer. This combined required output will run perfectly with the Hifonics BRZ1700.1D when wired down to a 1 Ohm load. This is achieved by wiring the Alpine Type X's Dual 4 Ohm voice coils in series/parallel which will reach a final impedance of 1 Ohm. For more information regarding subwoofer wiring, please check out our Subwoofer Wiring Diagram.

Hifonics Amplifier Features:
  • Brutus Series Monoblock Class D Car Amplifier
  • RMS Power Rating (@ 14.4V):
    • 4 ohms: 600 watts x 1 chan.
    • 2 ohms: 1200 watts x 1 chan.
    • 1 ohm: 1700 watts x 1 chan.
  • MOSFET power supply
  • Wired HFR-3 remote bass level control included
  • LED power (green) and protect (red) indicators
  • Variable Bass Boost (0 to +10 dB bass boost at 45 Hz)
  • Mono channel operation
  • Preamp RCA outputs to daisy chain multiple amps
  • 4-Way System Protection circuitry (thermal, overload, speaker short and DC protect)
  • Heavy duty aluminum alloy finned heatsink for maximum heat dissipation
  • Silver-plated unbalanced RCA level inputs
  • Silver-plated molded screw terminals
  • Input sensitivity:
    • Input Level (Unbalanced): 0.2V-9V
    • Input Level (Balanced): 0.04V-8V
  • Variable low-pass filter (35-250 Hz, 24 dB/octave)
  • Subsonic filter (15-35 Hz, 24 dB/octave)
  • Phase Shift: 0-180°
  • Damping factor: >290
  • Frequency response: 35-250 Hz
  • CEA-2006 compliant amplifier
  • Dimensions: 16-15/16"L x 9-1/4"W x 2-7/16"H
  • 2-gauge power and ground wiring is required for installation. Contact us for information regarding a discount on select amplifier kits when purchased together with this amplifier.
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty
Alpine Subwoofer Features:
  • Two 10" Dual 4 ohm Type-X Series Subwoofers
  • Power Handling:
    • Peak: 6000 watts total / 3000 watts each
    • RMS: 2000 watts total / 1000 watts each
  • Impedance: Dual 4 ohms
  • Kevlar-Rohacell® parabolic cone
  • Injection Molded Santoprene®
  • Concealed Mount Gasket System
  • Reinforced Layer Spider Integration
  • Heavy Duty 8 gauge Push, Banana Plug Jumper
  • Perimeter Vented
  • Custom High Strength Steel
  • Airflow Optimized Extended/Vented Pole
  • 220°C High Temp Wire on Glass Fiber (TIL) Former
  • 6-Layer Dual 4 ohm Voice Coil
  • Frequency response: 26-200 Hz
  • 1-year SonicElectronix.com warranty

Specifications & Details


Amplifier Power Specifications
RMS Power @ 4 ohms
600 watts x 1 channel
RMS Power @ 2 ohms
1200 watts x 1 channel
RMS Power @ 1 ohm
1700 watts x 1 channel
Bridged RMS Power
Not Bridgeable
Amplifier Specifications
Amplifier Class
D
Number of Channels
1 - Mono
Total RMS Power Output
1700 watts
Maximum Input Gauge Size
2 AWG
Minimum Impedance Unbridged
1 ohms
Minimum Impedance Bridged
Not Bridgeable
THD at Rated RMS Power
<0.1%
Speaker Level Inputs
No
Preamp Outputs
1 pair
Built-in Crossover
Low-Pass (LP)
Low-Pass Crossover Frequency
35 - 250 Hz
Subsonic Filter
15 - 35 Hz
Signal-to-Noise Ratio
>95 dB
Bass Boost
0 - 10 dB
Remote bass/level controller
Yes
Fan Cooled
No
Fuse Rating
160A x 1 
CEA-2031 Compliant
Yes
Subwoofer Specifications
Subwoofer Size
10"
Voice Coil(s)
Dual
Impedance (Per Voice Coil)
4 ohms
RMS Power Handling
1000 watts
Total RMS Power Handling
2000 watts
Peak Power Handling
3000 watts
Total Peak Power Handling
6000 watts
Woofer Surround
Santoprene Rubber
Woofer Composition
Glass Fiber and Pulp/Kevlar
Frequency Response
26 - 200 Hz
Top-Mount Depth (Mounting Depth)
8.6"
Recommended Enclosure Type
Ported / Vented
Sealed
Warranty and Return Policy
Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Sonic Electronix

Item Details


Manufacturer:

Model Number:

BRZ1700.1D_2-SWX-1043D

Weight:

76.55lbs

Internal SKU:

brz17001d_2-swx1043d

Internal Product ID:

30240

Customer Ratings & Reviews



5 star
85%
4 star
10%
3 star
2%
2 star
1%
1 star
2%



Durability
4.7
Value
4.8
Features
4.7
Design
4.8
Usability
4.7

Customer Reviews

Sort by:

Loading...

Great 10" sub hits hard

The following review is for SWX-1043D, which is a part of the bundle you are viewing.

I have this sub with a kenwood KAC-9105D amp 900w rms at 2 ohms. I've had it for a month now, and just now the sub is starting to break in and is sounding better every day. I was worried about the distortion at first but it seems to be clearing up...I wonder if anyone else has had issues with this. It seems as though it shouldn't waffle or distort being 1000w rms and 3000 peak. But it truly sounds a lot better now than at first maybe it was just break in period. Sonix got all the deals and I won't shop anywhere else.

By Everedee on October 22, 2011

44

found this helpful.

amazing sound quality for the money

The following review is for SWX-1043D, which is a part of the bundle you are viewing.

wow for a 10 in sub you cant go wrong. i have just 1 in a ported box tuned to 32 htz, custom made with 1.5 in mdf all around running on a hifonic bxi2010 with about less than 3/4 gain. perfect combination the sub is getting about 900 watts rms it could handle alot more but i cant handle the madness of the bass that why it is set there. nice clean bass with no distortion and the low notes i just can't describe just amazing beating the crap out of my 07 nissan quest. sonicelectroix is the store to beat great prices on everything.

By GANESH on April 30, 2010

41

found this helpful.

Best speaker i have owned

The following review is for SWX-1043D, which is a part of the bundle you are viewing.

I would recommend loud as hell and i only have one 10" in a probox. Only bad thing is that it smells funny for the first couple of months when u push it, but after that either you don't notice or u get use to the smell better than kicker punch and JL audio i have owned them all.

By Joe on February 21, 2013

40

found this helpful.

Great

The following review is for SWX-1043D, which is a part of the bundle you are viewing.

This sub is very top of the line. Glad to have it. Sounds great.

By dustin on September 27, 2011

41

found this helpful.

Sound good but be careful

The following review is for SWX-1043D, which is a part of the bundle you are viewing.

I have had these 2 of these subs for a week now. They do have excellent sound quality if put in the correct box. I have them in a dual 10" separately sealed box. With 1.25 cubic feet per. They sound very nice. Problem is i have them running on a Rockford Fosgate T-2500bdcp. I do have the gain turned way down. I had everything professionally installed or so i thought. After two weeks of playing them easy to break in 1 blew at a fairly low level. I didnt have in bumping. Just heard a crack then pop. Boom sub is gone. I am going to replace it with another but turn gain down even farther. All in all i do recommend them but make sure you properly power them. Use SMD products to watch clipping. Be easy on them for awhile and you should be good. I listen to mainly metal music death, black, and industrial metal. They kept up with the double bass drum beautifly. Try them.

By LitlChevy on February 5, 2014

39

found this helpful.

alpine swx-1043d

The following review is for SWX-1043D, which is a part of the bundle you are viewing.

This sub it precision audio at its best. I know theres better out there but when you on a budget this sub surpasses them all and is deff my prefered choice.

By reece on August 25, 2011

40

found this helpful.

great

The following review is for SWX-1043D, which is a part of the bundle you are viewing.

This is a great sub. This subs makes the most noise for how big it is you should get it but i did buy the 12" after i bought the 10"

By Justin on August 8, 2011

40

found this helpful.

Great Amp!!

The following review is for BRZ1700.1D, which is a part of the bundle you are viewing.

I have this amp pushing 2 12" kicker cvx and the amp is a quarter of the way up and im scared to turn it up cause its slamming them. Amp is a beast. Great purchase for a great price and you cant go wrong dealing with sonicelectronix!! Very pleased customer!!

By Pete on April 8, 2014

36

found this helpful.

Upgrade from Walmart Brand

The following review is for SWX-1043D, which is a part of the bundle you are viewing.

Upgraded From 2 12' Dual Subwoofers in a bandpass box with Dual 300W RMS Amp, to 1 Of these in a 1.3^ft Ported Box bought here on sonic Powered by a Alpine MRX-M100, 1000W RMS Amp. This Subwoofer is Considerably louder then my Old Setup, Takes up 1/2 of the trunk space of my old setup, and the sound quality of the Old setup isn't even comparable. Amazing Product for sure.

By Christopher on June 23, 2012

39

found this helpful.

Sweet

The following review is for SWX-1043D, which is a part of the bundle you are viewing.

this thing is crazy awesome for people looking for SPL

By Ralphy on May 29, 2012

38

found this helpful.

Add-ons


Similar Products

Best selling similar products

NVX QBUS8P

• Low Profile Ported Subwoofer System
• 150 Watts RMS
• Built-In Class D Amplifier
• Variable Bass Boost
• Speaker-Level Inputs
• Wired Remote Bass Level Control

(6)

$129.99

NVX QBSTA

• 11" Spare Tire Subwoofer System
• Built-In Class D Amplifier
• Top-mount amplifier controls
• Speaker-Level Inputs
• Wired Remote Bass Level Control

$249.99

Belva BPKG210v2 Dual 10" Subwoofer and Amp Package with Box and Wiring Kit

• Works with both Factory and Aftermarket Audio Systems
• Dual 10" Belva Subwoofers
• Monoblock Amp with Bass Knob
• Ported Enclosure
• Complete Amp Wiring Kit

(29)

$214.99

Pioneer TS-WX1210AM

• 350 watts Single 12" Subwoofer Enclosure
• 4 ohms Impedance
• Spring-loaded Terminal Posts
• Enclosure Dimensions: 10" TD x 12-1/2" BD x 19-3/4" W x 14-7/8" H

(2)

$179.99

MTX Audio TNP212D2 Terminator Dual Subwoofer Package + Amplifier

• 800W Peak (2 Subs)
• 400W RMS (2 Subs)
• 48oz. Magnet
• Terminator Series Class D Monoblock Car Amplifier
• Heavy 5/8" MDF Construction
• Black Carpeting

(153)

$279.95

Related Searches


BRZ1700.1D_2-SWX-1043D small

Item added to your cart.

Price: $739.95

Essential add-ons
40 Square Feet of Sound Dampening Material

Thicker than the competition, complete sound damping kit for entire vehicle! Use for trunk, doors, roof and floor.

$279.99

$89.99

Add to cart
Dynamat Sound Dampening Bulk Kit

Did you know sound dampening will reduce those annoying rattles and even increase your SPL?

$383.95

$235.99

Add to cart
Stinger Sound Dampening Bulk Kit

Stinger's Roadkill sound dampening series is sure to kill unwanted road noise and rattles! Enough sound dampening for the whole car!

$219.00

$140.99

Add to cart
NVX XBG3PK 1/0 Gauge OFC Big 3 Upgrade Kit

Comes with everything you need to upgrade your power and ground wire.

$114.99

$99.99

Add to cart
2" Universal, Professional Heavy Duty Roller for Sound Damping/Dampening

Universal rubber roller to make it easy to install sound dampening.

$9.99

$7.99

Add to cart
Five Piece Installer Panel Removal Tool Kit

Installer's Panel Removal Installation Tool Kit for Car Stereo, Speakers and Car Audio Installs

$18.99

$11.99

Add to cart
SMD DD-1 Distortion Detector

Set the gain of an audio amplifier quickly and accurately

$207.99

$199.99

Add to cart
Impedance Meter / Signal Generator

Easy to locate tuning frequencies of passive radiators and ported enclosures

$461.99

$451.99

Add to cart
Save up to 10 different vehicles in your garage

Loading...
Identify your vehicle and submodel details
  • Owner’s manual
  • Vehicle’s insurance card
  • Vehicle registration
  • Vehicle produced after 2005: Inside driver’s side door
  • Vehicle produced before 2005: Rear passenger doorjamb, glove box, center console, or engine compartment
Car Info Side Door Icon
Vehicle Registration Icon
Vehicle Insurance Icon