Garage
Shop

900W Complete PowerBass + Visonik Bass Package

Visonik V317SX Class AB Amplifier + 2 PowerBass PS-10 Subs + 8 Gauge Amp Kit + Dual 10" Sealed Box

highlight-star-icon

Hi-Intense Series Car Amplifier • Single-Channel Monoblock Operation • Class AB • 800W Max Output • Variable Bass Boost • Two 10" Single 4 Ohm PS Series Subwoofers • 2-Layer Roll Treated Foam Surround

Learn more about the 2-ps10_v317sx

We apologize

This item has been discontinued

Description


PowerBass brand icon

Authorized dealer

PowerBass and Visonik Bass Package

This Sonic Exclusive package is sure to excite with two 10" PowerBass PS-10 Subwoofers, paired along with a Visonik V317SX amplifier. This excellent bass package is rated to push 600 watts of RMS power. The PowerBass Subwoofers have Single 4 Ohm Voice Coils; meant to be wired in parallel down to a final impedance of 2 Ohms. For more information regarding subwoofer wiring, please check out our Subwoofer Wiring Diagram.

Each PowerBass subwoofer requires 225 watts of RMS power. The included Visonik V317SX amplifier will compliment this required power by supplying a perfect matchup of RMS continuous power. This package also includes a sealed subwoofer enclosure to help for responsive, clean bass, and also a 8 gauge amplifier kit which is perfect to supply power to the amplifier.

Amplifier Features:
  • Hi-Intense Series Single-Channel Class AB Car Amplifier
  • RMS Power Rating:
    • 4 ohms: 400 watts x 1 chan.
    • 2 ohms: 600 watts x 1 chan.
  • Max power output: 800 watts x 1 chan.
  • Full MOSFET power supply and circuitry
  • Power/Protection LED indicators
  • Tuned Bass EQ (0-18 dB bass boost @ 45 Hz)
  • Single channel monoblock operation
  • Heavy duty aluminum alloy heatsink for heat dissipation
  • Silver RCA level inputs
  • Gold plated screw terminals
  • Variable low-pass filter (50-250 Hz, 24 dB/octave)
  • Variable subsonic filter (20-50 Hz, 24 dB/octave)
  • 200mV - 4V Input Sensitivity
  • Frequency response: 20-20,000 Hz
  • 90dB Signal-to-Noise Ratio
  • 60dB Channel Separation
  • 22K Ohm Input Impedance
  • Dimensions: 12"L x 9-5/8"W x 2H
  • 2-year Manufacturer's warranty
Subwoofer Features:
  • Two 10" Single 4 Ohm PS Series Subwoofers
  • Power Handling:
    • Peak: 900 watts total / 450 watts each
    • RMS: 450 watts total / 225 watts each
  • Impedance: Single 4 ohm
  • Ribbed DDC-treated paper cone woofer
  • 2-Layer roll treated foam surround
  • Precision stamped steel basket with aeroventing
  • Progressive flat spider
  • One piece EVA closed cell gasket
  • Extended and vented pole motor assembly
  • Industry-standard cutout patterns
  • 2" BASV voice coil
  • 110oz. Magnet
  • Frequency response: 33-500 Hz
  • Sensitivity: 90 dB
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty
Enclosure Features:
  • Dual 10" Sealed Subwoofer Enclosure
  • Made from durable 3/4" Medium Density Fiberboard (MDF)
  • Covered in black carpet
  • Absolute logo places on the front of the enclosure
  • Two binding post terminals on the back of the enclosure
  • Square box enclosure universal for most vehicles
  • Mounting depth: 10-1/2"
  • Cutout diameter: 9-1/8"
  • Recessed front panel does not allow subwoofers trim ring to extend beyond 5/8" mounting diameter
  • Box volume: 1.589 total cubic feet (0.79 cubic feet per chamber)
  • Dimensions: 12-3/8"D x 25"W x 12-1/4"H
  • Authorized Internet Dealer
Amplifier Kit Features:
  • Amplifier Installation Kit with RCA Interconnect Cable
  • 8 Gauge (AWG) Power and ground cable for excellent power transfer
  • Designed for systems up to 1000W
  • Comes with everything needed to install an amplifier
  • RCA Interconnect cables use twisted pair construction for optimal signal transfer with low noise interference
  • Speaker cable is easy to install with clean and clear sound
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty
Amplifier Kit Includes:
  1. 17 ft. of 8 Gauge blue power cable
  2. 3 ft. 8 Gauge black ground cable
  3. 17 ft. Neon blue series RCA cable
  4. 16 ft. of Premium speaker cable
  5. 17 ft. of 18 Gauge blue remote turn-on wire
  6. 6 ft. Split loom tubing
  7. 1 AGU Fuse Holder
  8. 50 AMP Fuse
  9. All Necessary Hardware for Installation

Specifications & Details


Full Range Amplifier Power Specifications
RMS Power @ 4 ohms
400 watts x 1 channel
RMS Power @ 2 ohms
600 watts x 1 channel
RMS Power @ 1 ohm
Not Stable
Bridged RMS Power
Not Bridgeable
Peak Power Output
800 watts x 1 channel
Amplifier Specifications
Amplifier Class
A/B
Number of Channels
1 - Mono
Maximum Input Gauge Size
4 AWG
THD at Rated RMS Power
0.05%
Speaker Level Inputs
No
Preamp Outputs
1 pair
Built-in Crossover
Low-Pass (LP)
Low-Pass Crossover Frequency
50 - 250 Hz
Subsonic Filter
20 - 50 Hz
Signal-to-Noise Ratio
90 dB
Bass Boost
0 - 18 dB
Remote bass/level controller
No
Fuse Rating
25A x 2 
Subwoofer Specifications
Subwoofer Size
10"
RMS Power Handling
225 watts
Total RMS Power Handling
450 watts
Peak Power Handling
450 watts
Total Peak Power Handling
900 watts
Woofer Surround
Foam
Woofer Composition
Reinforced Paper
Voice Coil(s)
Single
Impedance (Per Voice Coil)
4 ohms
Sensitivity
90 dB
Frequency Response
33 - 500 Hz
Enclosure Specifications
Box Type
Sealed
Number of Subwoofers
2
Box Style/Shape
Square/Rectangle
Height
12-1/4"
Width
25"
Depth
12-3/8"
Wood Thickness
3/4"
Number of Terminals
2
Terminal Type
Binding posts
Box Exterior Color
Black
Box Finish
Carpet
Warranty and Return Policy
Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Item Details


Manufacturer:

Model Number:

2-PS-10_v317sx

Weight:

58.70lbs

Internal SKU:

2-ps10_v317sx

Internal Product ID:

31415

Customer Ratings & Reviews



5 star
62%
4 star
27%
3 star
8%
2 star
0%
1 star
3%



Durability
4.4
Value
4.7
Features
4.3
Design
4.3
Usability
4.6

Customer Reviews

Sort by:

Loading...

Temp Replacement

The following review is for V317SX, which is a part of the bundle you are viewing.

I bought this amp to temporarily replace my high end amp that is broken beyond repair. Hopefully it can power my subs till I can buy another high end amp. But bass on others reviews this sounds like it could be a promising replacement for awhile.

By Talowin on July 3, 2010

10

found this helpful.

Good Product

The following review is for ISPKBL8-BG, which is a part of the bundle you are viewing.

Used this package on my Mazda 6 i Sport and it covered the length of the car fine. Had scrap to splice off onto multiple amps.

By NETech on November 14, 2011

8

found this helpful.

Comes with everything you need at a great price!

The following review is for ISPKBL8-BG, which is a part of the bundle you are viewing.

I ordered this kit for my two 12" mtx subs and a one channel amp and it came with all of the wiring necessary to gets my subs bumping

By Luke on August 23, 2010

8

found this helpful.

Great entry level sub

The following review is for PS-10, which is a part of the bundle you are viewing.

Your not gonna find a better bang for the buck in this price range... iv'e had this sub for a few months pushing 400rms to it with my rockford amp. It sounds much better then any other entery level sub in the price range. Can't go wrong with this thing.

By kyle on April 21, 2012

7

found this helpful.

amp is ILL

The following review is for V317SX, which is a part of the bundle you are viewing.

This amp is great, it works perfect, drives my Kenwood KFC series sub perfectly, it bumps, shakes my mirrors, rattles my trim, this thing bumps! it is small enough to fit almost anywhere, and is a great value.

By A Money Swagg Flocka on December 15, 2010

7

found this helpful.

Not bad at all.

The following review is for V317SX, which is a part of the bundle you are viewing.

The amp has a great deal of power and a 24 db slope for the crossover. I simply couldn't find a better deal for the money. It's running at 2 ohm just fine connected to a 12" DVC woofer.

By Me on September 8, 2010

7

found this helpful.

Great Value

The following review is for ISPKBL8-BG, which is a part of the bundle you are viewing.

I shopped around but couldn't beat the deal I got from Sonic Electronix on this Raptor cable set for connecting my subwoofer.

By Mike on May 30, 2011

6

found this helpful.

Good bang for your buck

The following review is for V317SX, which is a part of the bundle you are viewing.

I bought this amp to power one 12" SPL sub in my wife's Acura RSX. It's held up great so far and powers the sub pretty well. No complaints here.

By Vincent on February 23, 2011

6

found this helpful.

Great product

The following review is for ISPKBL8-BG, which is a part of the bundle you are viewing.

I used this kit for one Alpine Type R 12 with an MRP-M500 amp and it works perfectly! I don't know if it's true 8 gauge, but I'm sure it's not more than 10 gauge. Been using it for a month and haven't had any problems.

By Alex on January 4, 2011

6

found this helpful.

Awesome amp for the price

The following review is for V317SX, which is a part of the bundle you are viewing.

I bought this amp to replace my old one because it went into protect mode and couldn't be fixed. I have a Power Bass 12 in a single cab truck and it shakes it to pieces. I would definitely recommend it to someone espically for the price. People don't let the price fool you...its a good deal

By vencent on December 29, 2010

6

found this helpful.

Add-ons


Similar Products

Best selling similar products

JL Audio JD1000/1 with Amplifier Wiring Kit

• NexD Switching Technology
• Differential-balanced Inputs
• 1000W Class D Mono-block
• Compact and Powerful
• Includes Amplifier Wiring Kit

(94)

$449.98

Rockford Fosgate Punch P500X1BD with Amplifier Wiring Kit

• RMS: 150W x 1 @ 4 ohms, 300W x 1 @ 2 ohms, 500W x 1 @ 1 ohm
• Total RMS Power: 500W
• CEA-2006 Compliant
• Tuned Bass EQ: 0 to +18 dB
• Super Efficient Class BD Circuitry
• Dimensions: 11"L x 7-3/4"W x 2-3/8"H

(104)

$439.98

Hertz HCP 4M with Free Premium NVX 4 Gauge Amp Kit

• 65 Watts RMS x 4 @ 4 ohms
• 95 Watts RMS x 4 @ 2 ohms
• CEA-2006 Compliant/Preamp Outputs/LPF
• Corrosion Protection
• Water jet tested
• Dimensions: 12.40" x 7.48" x 1.97"

(69)

$484.98

JL Audio JD500/1 with Amplifier Wiring Kit

• NexD Switching Technology
• 500W Mono-block
• Differential-balanced Inputs
• Onboard LED-clipping indicator ring
• Includes Amplifier Wiring Kit

(95)

$329.98

JL Audio XD700/5v2 with Amplifier Wiring Kit

• NexD Switching Technology
• Differential Balanced Input Section
• Advanced Rollback Protection
• Selectable Low-Pass Filter Slope: 12 dB or 24 dB
• Detented, Calibrated Filter Freq. Potentiometer

(20)

$429.99

Related Searches


2-PS-10_v317sx small

Item added to your cart.

Price: $190.95

Essential add-ons
Belva BAK42

Complete 4 Gauge Amplifier Wiring Kit with 2-Channel RCA Interconnects (CCA Wiring)

$59.99

$34.99

Add to cart
NVX XKIT42

100% Copper, 2-Chan. True Spec 4 Gauge Amp Installation Kit

$114.99

$99.99

Add to cart
NVX XBRC

Universal Remote Level Control for Car Amplifier/Amp Bass/Input

$9.99

$7.99

Add to cart
NVX SDTK20

Trunk Kit - 20 Square Feet of Sound Dampening Material (Five 18" x 32" Pieces)

$89.99

$59.99

Add to cart
Dynamat Xtreme 20' Trunk Kit 19405

20 ft. Trunk Kit with (5) Dynamat Extreme 18" x 32" Pieces

$236.95

$149.95

Add to cart
Boom Mat Damping Material (050210)

20.8 sq.ft Damping Material - (10 pk - 12-1/2" x 24" x 2mm )

$145.81

$119.99

Add to cart
Save up to 10 different vehicles in your garage

Loading...
Identify your vehicle and submodel details
  • Owner’s manual
  • Vehicle’s insurance card
  • Vehicle registration
  • Vehicle produced after 2005: Inside driver’s side door
  • Vehicle produced before 2005: Rear passenger doorjamb, glove box, center console, or engine compartment
Car Info Side Door Icon
Vehicle Registration Icon
Vehicle Insurance Icon