Garage
Shop

Kicker ZX200.2 (11ZX200.2)

200W RMS 2-Channel ZX Series Subwoofer Amplifier (ZX2002)

Kicker
Shop all Kicker
Product videos
highlight-star-icon

ZX Series 2-Channel Class AB Car Amplifier • 70W x 2 chan. @ 4 ohms • 100W x 2 chan. @ 2 ohms • 200W x 1 chan. @ 4 ohms • Tuned Bass EQ • Balanced differential inputs • Low-Pass & High-Pass Filters

Learn more about the 11zx2002

We apologize

This item has been discontinued

Product Highlights


ZX Series 2-Channel Class AB Car Amplifier • 70W x 2 chan. @ 4 ohms • 100W x 2 chan. @ 2 ohms • 200W x 1 chan. @ 4 ohms • Tuned Bass EQ • Balanced differential inputs • Low-Pass & High-Pass Filters

Description


Kicker brand icon

Authorized dealer

Why Choose Kicker Amplifiers:

Kicker Always Exceeds Rated Power

Kicker Performance Audio has been around since 1980 and has been producing amazing products since then. Kicker’s drive to consistently produce products that not only are great but also push the standards of the car audio industry is very apparent in all series of their amplifiers. All Kicker amplifiers are CEA-2006 Compliant, assuring you are receiving a continuous certified RMS power rating. Kicker will always exceed the rated power because Kicker is notorious for under rating their amplifiers. So really you will be getting more power than you actually pay for, which is not true for other lower end performance amplifiers that generally over rate their amplifiers. Kicker amplifiers will provide a choice of three automatic turn-on modes; remote, DC offset, or signal sense, which make them compatible with any car audio system. Along with their high-density convection heat sink for extreme heat dissipation and high efficiency MOSFET power supply, Kickers amplifiers are great way to go when selecting the perfect amplifier for your car audio system.

Kicker FIT Fail Safe Integration Technology

Kicker Fail Safe Technology (FIT):

Kicker has manufactured a new Fail-Safe Integration (FIT) technology into all of their amplifiers. The FIT technology uses isolated differential inputs in order to reject noise or electrical interferences, caused by engines, alternators or any other audio or video component throughout your vehicle. The differential inputs will use a muting circuit that will block out any additional noise that may stream down the line. The FIT technology will help created the cleanest and purest sound possible for any audio system. The Kicker FIT technology is setting the standard for high quality sound.

  • ZX Series 2-Channel Class AB Car Amplifier
  • RMS Power Rating:
    • 4 ohms: 70 watts x 2 chan.
    • 2 ohms: 100 watts x 2 chan.
    • Bridged, 4 ohms: 200 watts x 1 chan.
  • Total RMS power output: 200 watts
  • MOSFET power supply
  • LED power and protection indicators
  • Tuned Bass EQ (0-18 dB bass boost at 40 Hz)
  • FIT (Fail-Safe Integration Technology) utilizes differential inputs to reject noise and electrical interference for the quietest operation possible and ultimate audio clarity
  • Balanced differential inputs make KICKER ZX Amplifiers compatible with any factory radios
  • Eliminates unwanted noise in a system
  • Boost, gain, and crossover frequencies are top-mounted for easy access, and a handy protection indicator featuring a new flashing yellow low-voltage light enhances the end panel
  • Bridgeable operation
  • Speaker-level inputs compatible (switchable) through RCA connection, Kicker 09ZISL required and sold separately
  • Automatic turn on modes: remote, DC offset, or signal sense
  • Thermal, voltage, and short circuit protection circuitry
  • Variable high-pass filter (50-200 Hz, 12 dB/octave)
  • Variable low-pass filter (50-200 Hz, 12 dB/octave)
  • Frequency response: 20-20000 Hz
  • New front panel allows customization with decals
  • CEA-2006 compliant amplifier
  • Dimensions: 10-1/4"L x 9-5/8"W x 2-1/8"H
  • 8-gauge power and ground leads recommended. Contact us for information regarding a discount on a select amplifier kit when purchased together.
  • Authorized Internet Dealer
  • 2-year Manufacturer's warranty

Extend your Kicker warranty to 3 Years when you install your new Kicker amplifier with a compatible Kicker power kit! For a limited time, you can register your Kicker amplifier and power kit to qualify for an additional year of coverage. This offer is only available through official Kicker dealers and will only last for a limited time. With this amplifier, the following power kits will qualify for the extended warranty program: Kicker 09PK8, Kicker 05CK84, Kicker 09ZCK8

2011 Kicker Authorized Online Dealer and eBay Seller

Product history:

Kicker 11ZX200.2 thumbnail
(newest, current model)
Kicker 10ZX200.2 thumbnail
(previous model, replaced by Kicker ZX200.2 (11ZX200.2))
Kicker 08ZX200.2 thumbnail
(previous model, replaced by Kicker ZX200.2 (10ZX200.2))
Kicker ZX200.2 thumbnail
(previous model, replaced by Kicker 08ZX200.2)

Specifications & Details


Power Specifications - Full Range Channels
RMS Power @ 4 ohms
70 watts x 2 channel
RMS Power @ 2 ohms
100 watts x 2 channel
Bridged RMS Power
200 watts x 1 channel
Amplifier Specifications
Amplifier Class
A/B
Number of Channels
2-Channel
Total RMS Power Output
200 watts
Maximum Input Gauge Size
8 AWG
Minimum Impedance Unbridged
2 ohms
Minimum Impedance Bridged
4 ohms
THD at Rated RMS Power
1%
Speaker Level Inputs
Yes
Preamp Outputs
1 pair
Built-in Crossover
Low-Pass (LP)
High-Pass (HP)
High-Pass Crossover Frequency
50 - 200 Hz
Low-Pass Crossover Frequency
50 - 200 Hz
Signal-to-Noise Ratio
95 dB
Bass Boost
0 - 18 dB
Remote bass/level controller
No
Fuse Rating
30A x 1 
Warranty and Return Policy
Parts Warranty Duration
2 years
Labor Warranty Duration
2 years
Warranty Provider
Manufacturer

Item Details


Manufacturer:

Model Number:

11ZX200.2

Weight:

7.00lbs

Internal SKU:

11zx2002

Internal Product ID:

31874

Product and How-to Videos


Customer Ratings & Reviews



5 star
50%
4 star
17%
3 star
0%
2 star
33%
1 star
0%



Durability
4.7
Value
3.9
Features
3.5
Design
4.7
Usability
5

Customer Reviews

Sort by:

Loading...

Kicker ZX200.2 (11ZX200.2)

This was the first amp I bought and all I can say is I have not been let down. The quality of this product is amazing and I am still enjoying it 6 months after buying it, no regrets! I highly recommend a professional install.

By Mark on August 13, 2012

6

found this helpful.

Works great!

I have this amp hooked up to some DS6.5 components and DS 6x9's, and it pushes them very well. I've had it hooked up for a few months now and I haven't had any issues with it. I couldn't be more satisfied.

By Karen on May 13, 2012

5

found this helpful.

check you impedance!!!!

Before bridging the channels check you impedance. The previous reviews said the kicker component set was bridged o pull more power. Uh 4 ohms + 4 ohms in a parallel is 2 ohms and in bridged mode this amp is not compatible. That is why it got hot blew fuses and cuts off. Please disregard the previous reviews i have this amp in my g20 powering my 4x6 and 6 3/4 in a parallel at 2 ohms per channel and it does not even break a sweat. If in doubt take a multi meter set it to resistance and do an ohm check. It will save you time and money by ensuring the speaker resistance and amp capabilities are matched. Don't just hook it up crank it up and hope for the best. Do it right the first time. I am still running impulse amps and blue thunder amps from the 90s that are still operational because i never hooked them up incorrectly. If in doubt take it to a professional or somebody who knows what they are doing!!! Great strong underrated amp and will last for years under normal and correct usage!!!

By Gene on April 3, 2012

5

found this helpful.

Its Oright!

I bought this amp about 2 months ago for a pair of component speakers Kicker KS65.2. This amp can push them decently using both channels, but if you plan on using them to get the most out of it in bridge mode the amp will over heat and go on protect! If you want to push it you probably would get to listen for 20min 'til it goes on protect. And yes, I checked all my connections, and also it's not maxed out. I turn the amp gain 3/4 of the way and have it tuned at 100Hz lowest, so no lows are hitting, and I also only turn up the stereo (aftermarket) to 2/3 of the way up. I have doubts of it in 2-channel mode now that its getting hot out so probably won't be good in ANY MODE! I honestly wouldn't recommend this amp if you want to truly push any competent speakers! Or live in a hot place! I was truly disappointed with my first kicker amp.

By Chubby on March 29, 2012

5

found this helpful.

Good power in a small package!

This is an excellent amp for a two-way front stage. It definitely doesn't leave much in the way of headroom for some high end components, but for lower budget component sets ran at two ohms, this is an excellent choice, with an even better price point.

By Tony on December 10, 2012

3

found this helpful.

Its Oright!

I bough this amp about 2 months ago for a pair of component speakers Kicker KS65.2. This amp can push them decently using both channels, but if you plan on using them to get the most out of it in bridge mode, the amp will over heat and go on protect! If you want to push it, you probably would get to listen for 20min till it goes on protect. And yes, I checked all my connections, and also it's not maxed out. I turn the amp gain 3/4 of the way and have it tuned at 100Hz lowest, so no lows are hitting, and I also only turn up the stereo (aftermarket) to 2/3 of the way up. I have doubts of it in 2 channel mode. Now that its getting hot out so probably dont be good in ANY MORE!!! I honestly wouldn't recommend this amp if you want to truly push any competent speakers!!!!!! OR LIVE IN A HOT PLACE!

By Chubby on March 29, 2012

3

found this helpful.

Add-ons


Similar Products

Best selling similar products

JL Audio XD200/2v2

• 75 watts x 2 channel @ 4 ohms
• 100 watts x 2 channel @ 2 ohms
• Bridged: 200 watts x 1 channel @ 4 ohms
• Total RMS Power: 200 watts
• Class D 2 ohms Stable 2-Channel Amplifier

(6)

$199.99

Taramps DS 800x2

• 250 watts x 2 channel @ 4 ohms
• 400 watts x 2 channel @ 2 ohms
• Bridged: 800 watts x 1 channel @ 4 ohms
• Total RMS Power: 800 watts
• Class D 2 ohms Stable 2-Channel-Channel Amplifier

$224.00

Hertz HCP2

• 65 Watts RMS x 2 @ 4 ohms
• 100 Watts RMS x 2 @ 2 ohms
• CEA-2006 Compliant
• Refined Heatsink with High Convection Capability
• Automatic Remote Turn-On/Off function
• Dimensions: 8.46" x 7.48" x 1.97"

$199.99

Hertz DPower 4

• 50 watts x 4 channel @ 4 ohms
• 65 watts x 4 channel @ 2 ohms
• Bridged: 130 watts x 2 channel @ 4 ohms
• Total RMS Power: 300 watts
• Class D 2 ohms Stable 4-Channel Amplifier

$279.99

Rockford Fosgate M2-200X2

• 50 watts x 2 channel @ 4 ohms
• 100 watts x 2 channel @ 2 ohms
• Bridged: 200 watts x 1 channel @ 4 ohms
• Total RMS Power: 200 watts
• Class D 2 ohms Stable 2-Channel Amplifier

$219.99

Related Searches


11ZX200.2 small

Item added to your cart.

Price: $149.95

Essential add-ons
Belva BAK82

Complete 8 Gauge Amplifier Wiring Kit with 2-Channel RCA Interconnects

$49.99

$29.99

Add to cart
Belva BAK82BL

Complete 8 Gauge Amplifier Wiring Kit with 2-Channel RCA Interconnects

$49.99

$24.99

Add to cart
Stinger SSK8

Complete 8 Gauge Amplifier Wiring Kit with 2-Channel RCA Interconnects

$31.00

$19.99

Add to cart
Stinger SS600XS

Complete 8 Gauge Amplifier Wiring Kit with 2-Channel RCA Interconnects

$65.00

$29.95

Add to cart
Stinger SK4681

8 Gauge Amplifier Wiring Kit with 2-Channel RCA Interconnects

$89.00

$42.99

Add to cart
Stinger SK6681

Complete 8 Gauge Amplifier Wiring Kit with 2-Channel RCA Interconnects

$125.00

$63.99

Add to cart
Kicker 47VK8

Complete 8 Gauge Amplifier Wiring Kit with 2-Channel RCA Interconnects

$59.99

$59.99

Add to cart
Belva BPK8

8 Gauge Premium (CCA) Copper Clad Aluminum Amplifier Power Wiring Kit with Speaker Wire

$39.99

$19.99

Add to cart
Stinger SK4281

8 Gauge Power Amplifier Installation Kit

$69.00

$33.99

Add to cart
StreetWires ZN1K-08

8 Gauge Amplifier Power Installation Kit

$43.95

$39.95

Add to cart
Stinger SK6281

8 Gauge Power Amplifier Installation Kit

$83.00

$42.99

Add to cart
NVX Remote Level Bass Control with Digital Voltmeter

Controls bass level and frequency and monitor voltage

$99.99

$29.99

Add to cart
NVX XBRC

Universal Remote Level Bass Control

$9.99

$7.99

Add to cart
Universal Remote Bass Level Control Knob

Flush Mount & Universal via RCA. Works with any amp, controls your bass output

$14.99

$7.99

Add to cart
NVX XMICROLOC2

Add a 2-Channel amp without replacing your factory radio

$18.49

$14.99

Add to cart
NVX XBBR2

Looking to fine tune the bass in your vehicle? Look no further

$149.99

$69.99

Add to cart
NVX XIV25 V-Series 2-Channel RCA Cable

16.4 ft 2-Channel RCA Audio Interconnect Cable with Twisted Pair Construction

$18.99

$12.99

Add to cart
NVX XWS1625 Speaker Wire

25 ft. of True 16 Gauge 100% Copper EnvyFlex Speaker Cable/Wire

$29.99

$19.99

Add to cart
16 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)

16 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)

$24.99

$12.99

Add to cart
80 Amp Smart Relay Isolator (XSBI80)

Smart isolator - Monitors and auto-charging feature!

$49.99

$24.99

Add to cart
80 Amp Relay Isolator (BIR80)

Great for isolating a second batter making it dedicated to the stereo system

$19.99

$14.99

Add to cart
200 Amp Smart Relay Isolator (XSBI200)

Smart isolator - Monitors and auto-charging feature!

$79.99

$54.99

Add to cart
500 Amp Smart Relay Isolator (XSBI500)

Smart isolator - Monitors and auto-charging feature!

$99.99

$74.99

Add to cart
500 Amp Relay Isolator (BIR500)

Does not create a voltage drop to the second battery like conventional isolators

$89.99

$65.99

Add to cart
Belva Nine Function Digital Multimeter

Perfect for any installation and troubleshooting

$29.99

$9.99

Add to cart
Six Function Digital Multimeter

Perfect for every toolbox

$14.99

$6.99

Add to cart
Steve Meade Designs IM-SG

Impedance Meter / Signal Generator

$461.99

$451.99

Add to cart
SMD DD-1 Distortion Detector

Set your gains like a Pro, accurately and quickly

$207.99

$199.99

Add to cart
SMD CC-1 Crossover Calibrator

This is a must have! Set your crossover frequency like a Pro

$195.99

$192.99

Add to cart
World's Smallest AFS / Mini ANL Fuse Holder

Accepts 4 gauge or 8-gauge wire

$19.99

$10.99

Add to cart
4/8 Gauge Mini ANL (MANL, AFS) Fuse Holder

4/8 Gauge Mini ANL (MANL, AFS) Fuse Holder

$9.99

$6.99

Add to cart
High Quality Element Resistant AGU Fuse Holder

Belva BAGUH2 AGU Fuse Holder

$9.99

$4.99

Add to cart
4/8 Gauge AGU Fuse Holder

4/8 Gauge AGU Fuse Holder

$9.99

$6.99

Add to cart
Modular Linkable ANL Fuse Block

Modular Linkable ANL Fuse Block

$59.99

$16.99

Add to cart
4/8 Gauge Mini-ANL/MANL/AFS Fuse Holder

4/8 Gauge Mini-ANL/MANL/AFS Fuse Holder

$9.99

$8.99

Add to cart
4 Pack of 80 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 80A Nickel Plated Fuses

$8.99

$3.99

Add to cart
4 Pack of 100 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 100A Nickel Plated Fuses

$8.99

$3.99

Add to cart
2 Pack of 100 Amp Nickel-Plated ANL Fuse

ANL 100A Nickel plated for better power transfer

$7.99

$3.99

Add to cart
2 Pack of 200 Amp Nickel-Plated ANL Fuse

Two fuses per order. High quality 200 Amp ANL Fuses

$7.99

$3.99

Add to cart
2 Pack of 300 Amp Nickel-Plated ANL Fuse

Two fuses per order. High quality 300 Amp ANL Fuses

$7.99

$3.99

Add to cart
Pair of 8 Gauge Spade Terminals, #8 Opening

Spade Terminals • 8 Gauge • 1 Red & 1 Black • Nickel Plated

$9.99

$2.49

Add to cart
8 Gauge Ring Terminals, 5/16" Opening

Nickel Plated Brass - 5 Pieces (3 Red & 2 Black)

$7.99

$2.99

Add to cart
Save up to 10 different vehicles in your garage

Loading...
Identify your vehicle and submodel details
  • Owner’s manual
  • Vehicle’s insurance card
  • Vehicle registration
  • Vehicle produced after 2005: Inside driver’s side door
  • Vehicle produced before 2005: Rear passenger doorjamb, glove box, center console, or engine compartment
Car Info Side Door Icon
Vehicle Registration Icon
Vehicle Insurance Icon