Garage
Shop

Ashly NE800PE

800W Peak, 2-Channel Class D Power Amplifier w/ Protea DSP

Ashly
Shop all Ashly
highlight-star-icon

NE-Series 800W Peak, 2-Channel Class D Power Amplifier • 400W Per Channel @ 4 Ohms • Protea DSP Enabled • DC Voltage Control • Rackmount Design • Built-In Protection Circuitry • 10/100 Ethernet Jack • XLR and Euroblock Analog Inputs • 4-Level Signal and Clip LEDs

Learn more about the ne800pe

We apologize

This item has been discontinued

Description


The New NE-Series (NE = Network Enabled)

Ashly's two-channel NE amplifiers provide a whole new level of punch and control for the most basic and the most advanced audio systems. Ashly's Network Enabled (NE) Series amplifiers are simple to use and offer full setup, control and monitoring utilizing standard 10/100 Ethernet protocol and Protea NE Software. No outboard control modules are necessary. NE amplifiers are also offered two ways; standard and "PE" (Protea Enabled) with Ashly's world-renowned Protea DSP.

The NE800 offers 400W per channel at 4 ohms. The input connections are 1/4" XLR Neutrik combo connectors and 6-pin Euroblock. Male XLR and Euroblock connectors are included for looping to additional amplifiers. The output connectors are locking Neutrik Speakon (NL-4) and Euroblock.

The Digital Signal Processing (DSP) is handled by 2 SHARC 32-bit/96kHz processors. The extensive DSP options include High, Low and All-Pass filters (HPF/LPF/APF) with up to 48dB/octave slopes, delay, gating, ducking, compression/limiting, auto-leveling, graphic, parametric, notch and shelving equalization, gain adjustment and signal generators for calibration (incl. sine wave, white and pink noise). User presets can store and recover all global parameters of an amplifier's control surface and DSP sections. The Matrix Mixer enables any input to control any or all of the amplifier outputs through user customizable routing.

Each amplifier also offers DC voltage-controlled attenuators, which makes it very easy to control amp volume from remote locations. The NE-Series amplifiers also boast features such as the aforementioned Preset Recall, Remote Power Standby and data I/O ports for connecting accessories such as the WR-5 to control user selected parameters. With the NE-Series amplifiers, you get the dependability, ultra-high sonic quality and rugged construction that consumers expect from the Ashly name.

Product Features
  • 800W Peak, 2-Channel Class D Power Amplifier
  • RMS Power Rating:
    • 8 ohms: 200 watts x 2 chan.
    • 4 ohms: 400 watts x 2 chan.
    • Bridged, 8 ohms: 800 watts x 1 chan.
  • Integrated Protea DSP allows graphic and/or parametric EQ, high and low pass filters, time delay, etc.
  • Rackmount design allows you to install the amplifier in any standard equipment rack
  • 10/100 Ethernet jack enables control and monitoring of the amplifier's functions
  • DC voltage control
  • Remote power standby
  • Stepped and calibrated attenuator knob for each channel
  • Input slot available for optional CobraNet CNM-2 card or an AES/EBU input
  • Built-In protection circuitry protects against overloads and overheating
  • Power, standby, protect, network, temperature, current, and power switch disable status LED indicators
  • 4-Level signal and clip LEDs
  • Cooling: Temperature sensitive variable-speed fan, front-in, rear-out flow
  • Input Sensitivity: 26 or 32 dB or 1.4V
  • Input Impedance: 20k ohms, balanced
  • Frequency Response: 20-20,000 Hz ± 1dB
  • Damping factor: >250 (8 ohm load, <1KHz)
  • Distortion (SMPTE, typical): <0.5% (8 ohm load, 10dB below rated power)
  • Distortion (THD+N, typical): <0.5% (8 ohm load, 10dB below rated power)
  • Signal-to-Noise Ratio: >107 dB
  • THD (Total Harmonic Distortion): <0.5%
  • Dimensions: 15-1/2"D x 19"W x 3-1/2"H
  • 1-year Manufacturer's warranty
Inputs & Outputs
  • 2 x XLR inputs
  • 2 x Euroblock inputs
  • 1 x AC Power input
  • 1 x Input expansion slot
  • 2 x XLR Aux outputs
  • 1 x Euroblock Aux output
  • 2 x Speakon outputs
  • 1 x Euroblock speaker output
  • 1 x 10/100 Ethernet port
  • 1 x Remote Euroblock connector

Specifications & Details


Power Specifications
Number of Channels
2 Channels
Continuous Power @ 8 ohm
200 watts x 2 channel
Continuous Power @ 4 ohm
400 watts x 2 channel
Continuous Power @ 8 ohm (Bridged)
800 watts x 1 channel
Total Continuous Power
800 watts
Amplifier Specifications
Signal-to-Noise Ratio
>98 dB
Frequency Response
20 - 20000 Hz
THD (Total Harmonic Distortion)
0.5%
Cooling Options
Cooling Fan
Inputs
Euroblock
XLR
Outputs
Euroblock
SpeakOn
XLR
Physical Specifications
Height
3-1/2"
Width
19"
Depth
15-1/2"
Weight (Pounds)
35 lbs
Rackmount Spaces
2U
Warranty and Return Policy
Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Item Details


Manufacturer:

Model Number:

NE800PE

Weight:

35.00lbs

Internal SKU:

ne800pe

Internal Product ID:

32355

Customer Ratings & Reviews



5 star
0%
4 star
0%
3 star
0%
2 star
0%
1 star
0%



Durability
0
Value
0
Features
0
Design
0
Usability
0

Customer Reviews

Sort by:

Loading...
Sorry, no reviews found

Related Searches


NE800PE small

Item added to your cart.

Price: $1289.99

Save up to 10 different vehicles in your garage

Loading...
Identify your vehicle and submodel details
  • Owner’s manual
  • Vehicle’s insurance card
  • Vehicle registration
  • Vehicle produced after 2005: Inside driver’s side door
  • Vehicle produced before 2005: Rear passenger doorjamb, glove box, center console, or engine compartment
Car Info Side Door Icon
Vehicle Registration Icon
Vehicle Insurance Icon