Garage
Shop

Ashly PE800

800W Peak, 2-Channel Class AB Power Amplifier w/ Protea DSP

Ashly
Shop all Ashly
highlight-star-icon

PE-Series 800W Peak, 2-Channel Class AB Power Amplifier • 400W Per Channel @ 4 Ohms • Protea DSP Enabled • Adjustable Clip Limiter • DC Voltage Control • Stepped Input Attenuators • Variable Speed Fan

Learn more about the pe800

We apologize

This item has been discontinued

Description


The Power of Protea

PE-Series (Protea Enabled) amplifiers are far more than just another series of amplifier. The six 2-channel models boast a remarkable range of power all the way from 400 to 1900 watts per channel (@ 4 ohms), and their Ethernet functionalities certainly increase their already high value in professional audio applications. All PE-Series amplifiers are 2RU high, weigh less than 24lbs and will power 2, 4 or 8 ohm loads. Each amplifier also includes LED indicators for power, standby, protect, bridge mono, parallel mono and network communications, and are located on the left side of the front panel. On the right side, each channel has temperature and current indicators as well as a four-step signal meter.

PE-Series amplifiers incorporate state of the art control and power technologies. Each amplifier in the series can be monitored and controlled through the Ethernet port on the rear panel using standard, affordable Ethernet hardware and Protea NE Software™. This software gives you access to many diverse features, including real time control of input attenuation, channel mute, channel polarity, and even enables you to remotely power the unit on or off. Protea NE also allows you to monitor I/O level, protect, temperature, output current and clipping.

Ashly Audio has maintained that one of the secrets to superb sound and dependability is well-thought-out design and meticulous execution. Ashly's PE-Series takes that philosophy and multiplies it ten-fold. When your next project requires high performance amplifiers with superb sound, reliability, remote control and more, Ashly’s PE-Series power amplifiers have been designed to meet and even exceed the needs of both portable and long-term installation applications.

Product Features:
  • 800W Peak, 2-Channel Class AB Power Amplifier
  • RMS Power Rating:
    • 8 ohms: 200 watts x 2 chan.
    • 4 ohms: 400 watts x 2 chan.
    • Bridged, 8 ohms: 800 watts x 1 chan.
  • Integrated Protea DSP allows graphic and/or parametric EQ, high and low pass filters, time delay, etc.
  • Rackmount design allows you to install the amplifier in any standard equipment rack
  • Ethernet remote control & monitoring
  • 2-Stage high efficiency switched mode power supply
  • Stepped and calibrated attenuator knob for each input
  • DC Voltage control of input & remote power turn-on/off
  • Temperature sensitive variable-speed fan w/ front to back airflow
  • Selectable subsonic filter
  • Selectable clip-limiter
  • 4-Stage level meters
  • Output current & temperature indicators
  • Signal-to-Noise Ratio: >98dB
  • Safety/Compliance: cTUVus/FCC, CE, RoHS
  • 1-year Manufacturer's warranty
All Model Specifications:
  • Distortion (SMPTE, typical): <0.01% (8 ohm load, 10dB below rated power)
  • Distortion (THD+N, typical): <0.01% (8 ohm load, 10dB below rated power)
  • Frequency Response: 20 Hz - 20 kHz, (unweighted) ± 0.15dB
  • Damping Factor: >400 (8 ohm load)
  • Input Impedance: 20k ohms, balanced
  • Maximum Input Level: +21dB
  • Input Gain: 26dB, 32dB or 1.5V (Selectable)
  • Control Network: onboard, standard 10/100 Ethernet
  • Load Protection: adjustable clip limiter
  • Cooling: Temperature sensitive variable-speed controlled fan, front-in, rear-out flow
  • Front Panel Indicators per channel: Clip, -6dB, -12dB, -18dB, Temp, Current
  • Front Panel Indicators: Power, Standby, Bridge Mono, Parallel Mono, Comm
  • Attenuators: 1 per channel, calibrated/stepped, software, offset, remote
  • Input Connectors: XLR female/TRS, Euroblock, XLR male (looping)
  • Output Connectors: Screw terminal (800, 1200) Speakon (1800, 2400, 3000, 3800)
  • Protection: inrush current limitation, temperature monitoring heat-sinks, output DC protection, power transistor SOA protection, output over-current protection, mains fuses protection
  • Dimensions: 19" x 3.5" x 15.5" (88.9mm x 483mm x 394mm)

Key Features And Comparison Chart

Model Ashly PE800 Ashly PE1200 Ashly PE1800 Ashly PE2400 Ashly PE3000 Ashly PE3800
Power Requirements - 1/8 Power, Pink Noise, 4O
Wattage 420W 540W 611W 790W 1010W 1220W
Current Requirements 8O, Both Channels Driven (typ=1/8 power, pink noise)
Idle 2.4A 2.8A 2.4A 2.4A 2.6A 2.8A
Idle (Typ) 6.6A 8.6A 8.4A 10.4A 12.4A 14.6A
Idle (Max) 13.6A 20.2A 26.2A 33A 42A 50A
Current Requirements 4O, Both Channels Driven (typ=1/8 power, pink noise)
Idle (Typ) 9.4A 13.6A 13.0A 15.8A 19.6A 22.6A
Idle (Max) 21.8A 33.8A 42.0A 54.0A 68.0A 80.0A
Signal to Noise
(20-20,000Hz)
>98dB >105dB >108dB >110dB >111dB >112dB
Output Circuitry Class-AB Class-AB Class-H Class-H Class-H Class-H
Power Cable 15A Edison 20A Edison 20A Edison 20A Edison 30A Twist 30A Twist
Net Weight 22.0 lbs. 22.0 lbs. 23.0 lbs. 23.0 lbs. 24.0 lbs. 24.0 lbs.
Shipping Weight 27 lbs. 27 lbs. 28.0 lbs 28.0 lbs 29.0 lbs 29.0 lbs

Specifications & Details


Power Specifications
Number of Channels
2 Channels
Continuous Power @ 8 ohm
200 watts x 2 channel
Continuous Power @ 4 ohm
400 watts x 2 channel
Continuous Power @ 2 ohm
700 watts x 2 channel
Continuous Power @ 8 ohm (Bridged)
800 watts x 1 channel
Continuous Power @ 4 ohm (Bridged)
1400 watts x 1 channel
Total Continuous Power
1400 watts
Amplifier Specifications
Amplifier Class
H
Signal-to-Noise Ratio
>98 dB
Frequency Response
20 - 20000 Hz
THD (Total Harmonic Distortion)
0.01%
Voltage Gain
36 dB
Cooling Options
Cooling Fan
Inputs
1/4" TRS
Euroblock
XLR
Outputs
Binding Posts
SpeakOn
Physical Specifications
Height
3-1/2"
Width
19"
Depth
15-1/2"
Weight (Pounds)
27 lbs
Rackmount Spaces
2U
Warranty and Return Policy
Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Item Details


Manufacturer:

Model Number:

PE800

Weight:

22.00lbs

Internal SKU:

pe800

Internal Product ID:

32363

Customer Ratings & Reviews



5 star
0%
4 star
0%
3 star
0%
2 star
0%
1 star
0%



Durability
0
Value
0
Features
0
Design
0
Usability
0

Customer Reviews

Sort by:

Loading...
Sorry, no reviews found

Related Searches


PE800 small

Item added to your cart.

Price: $1259.99

Save up to 10 different vehicles in your garage

Loading...
Identify your vehicle and submodel details
  • Owner’s manual
  • Vehicle’s insurance card
  • Vehicle registration
  • Vehicle produced after 2005: Inside driver’s side door
  • Vehicle produced before 2005: Rear passenger doorjamb, glove box, center console, or engine compartment
Car Info Side Door Icon
Vehicle Registration Icon
Vehicle Insurance Icon