900W, 2-Channel Power Amplifier
2-Channel Power Amplifier • 900 Watts • Simple, Reliable Design • All-Steel 2U Chassis • Efficient Forced-Air Fans • Electronically Balanced XLR Inputs • Precision Detented Level Controls
Learn more about the xls402dThe XLS Series of power amplifiers from Crown represents a new era in affordable, quality power amplification. The line consists of five models in a uniform, rugged chassis, incorporating the best of tried-and-true design principles and innovative features.
Modern power amplifiers are sophisticated pieces of engineering capable of producing extremely high power levels. They must be treated with respect and correctly installed if they are to provide the many years of reliable service for which they were designed.
In addition, XLS Series amplifiers include a number of features which require some explanation before they can be used to their maximum advantage.
Minimum Guaranteed Power per channel, both channels driven |
|||||
XLS 202 |
XLS 402 |
XLS 602 |
XLS 802 |
XLS 5000 |
|
1 kHz with 0.5% THD | |||||
Stereo, 2 ohms (per ch.) | -- | -- | -- | -- | 2,500W** |
Stereo, 4 ohms (per ch.) | 300W | 450W | 600W | 800W | 1,800W* |
Stereo, 8 ohms (per ch.) | 200W | 300W | 380W | 500W | 1,100W* |
Bridge-Mono, 8 ohms | 600W | 900W | 1,200W | 1,600W | 3,600W* |
Bridge-Mono, 4 ohms | -- | -- | -- | -- *750W for 100V models |
5,000W** *with 0.1% THD **with 1% THD |
Sensitivity (volts RMS) for full rated power at 4 ohms |
1.25 |
Frequency Response (at 1 watt, 22 Hz - 20 kHz) | +0 dB, –1 dB |
Signal to Noise Ratio below rated power (20 Hz to 20 kHz, inputs terminated) A-weighted, below rated power No weighting, below rated power |
> 100 dB > 95 dB |
Total Harmonic Distortion (THD) at 1 full bandwidth power, from 20 Hz to 1 kHz | < 0.5% |
Intermodulation Distortion (IMD) 60 Hz and 7 kHz at 4:1, from full rated output to –30 dB | < 0.3% |
Damping Factor (8 ohm): 10 Hz to 400 Hz | > 200 |
Crosstalk (below rated power) at 1 kHz at 20 kHz |
–75 dB –50 dB |
Input Impedance (nominal) (balanced, unbalanced) |
20 kilohms, 10 kilohms |
Load impedance Stereo Bridge mono |
4-8 ohms 8 ohms |
AC Line Voltage and Frequency Configurations Available (± 10%) | 120 VAC 60 Hz 100 VAC 50/60 Hz 220 VAC 50 Hz 230-240 VAC 50 Hz |
Ventilation | Flow-through ventilation from front to back |
Cooling | Internal heat sinks with forced-air cooling |
Air Volume Requirements (per minute per unit) |
80.15 ft3 (2.27 m3) |
Dimensions: Width, Height, Depth | XLS 202, 402, 602, 802: EIA Standard 19"W (EIA RS-310-B) x 3.5” (8.9 cm) H x15.2" (38.6cm) D. XLS 5000: EIA Standard 19"W (EIA RS-310-B), 5.25” ( 13.3 cm) H x 15.5” (39.5 cm) D. |
Net Weight, Shipping Weight | XLS 202: 23.0 lb (10.4 kg), 28.0 lb (12.7 kg) XLS 402: 25.7 lb (11.7 kg), 30.7 lb (13.9 kg) XLS 602: 29.0 lb (13.2 kg), 34.0 lb (15.4 kg) XLS 802: 35.5 lb (16.1 kg), 40.5 lb (18.4 kg) XLS 5000: 62.0 lb (27.7 kg), 74.0 lb (33.6 kg) |
Internal Product ID:
32397