Access exclusive offers, news and more.
Thanks for signing up.You'll be the first to receive updates about new collections, top brands, and exclusive products.
1500W RMS, Class D Monoblock HFi Series Amplifier (HFi 1500D)
HFi Series Monoblock Class D Car Amplifier • 1000W x 1-Chan. @ 2 Ohms • 1500W x 1-Chan. @ 1 Ohms • Wired HFR-3 Bass Remote • 4-Way System Protection Circuitry • Preamp RCA Outputs • Blue Illuminated Hifonics Badge
Learn more about the LS-hfi1500d-RBHFi Series Monoblock Class D Car Amplifier • 1000W x 1-Chan. @ 2 Ohms • 1500W x 1-Chan. @ 1 Ohms • Wired HFR-3 Bass Remote • 4-Way System Protection Circuitry • Preamp RCA Outputs • Blue Illuminated Hifonics Badge
The HFi1500D complements any application for your subwoofers. Today’s high output subwoofers require only the finest, dedicated power to run loud and constantly in any vehicle. The HFi Monoblock series of amplifiers meets these expectations and will gladly get your system that extra bass you’re looking for.
Incorporating Class D circuitry to allow for dedicated, efficient power allows for higher bass response, and not sacrificing any sound pressure. Why neglect your subwoofer of the high power output it truly demands? The HFi Class D Monoblocks are affordable, extremely powerful, and designed with a pleasantly small chassis. This allows the high power output amplifiers to take up the least amount of space in any installation.
The included bass knob can allow you to adjust your bass to match any music type, and allows you to replicate your bass to compliment any genre type. Integrating the Pulse Width Modulated MOSFET power supply to allow for efficiency on your car battery allows this amplifier to put out impressive power without drawing too much from your car’s electrical system. Value is truly defined with HFi1500D – get yours today!
Internal Product ID:
33424
5 star |
|
0% |
4 star |
|
0% |
3 star |
|
0% |
2 star |
|
0% |
1 star |
|
0% |
Durability |
|
0 |
Value |
|
0 |
Features |
|
0 |
Design |
|
0 |
Usability |
|
0 |
Maximize Your Bass Potential with an Audio Control’s legendary Bass Restoration Processor
$149.00
16.4 ft of V-Series 2-Channel RCA Audio Premium Interconnect Cable with Dual Twisted Pair Hyper-Flex Technology
$12.99
Comes with everything you need to upgrade your power and ground wire.
$99.99
Great for isolating a second batter making it dedicated to the stereo system
$14.99
Does not create a voltage drop to the second battery like conventional isolators
$65.99
Make installation a breeze with the XBTU
$16.99
No-fail termination and current flow, it helps keep your system protected and running smoothly
$13.99
Great for amplifiers that do not accept a large gauge power wire
$9.99
Spade Terminals • 4 Gauge • 1 Red & 1 Black • Nickel Plated
$1.99
4 Gauge Ring Terminals with 3/8" Opening (5 Pieces)
$2.99
(4-pack) 4 Gauge Solid Copper Ring Terminals with Shrink Tubing
$9.99
Best selling similar products
• 300 watts x 1 channel @ 4 ohms
• 500 watts x 1 channel @ 2 ohms
• Total RMS Power: 500 watts
• Class D 2 ohms Stable Monoblock Amplifier
(38)
$164.95
• RMS: 800 x 1 @ 4 ohms, 1350W x 1 @ 2 ohms, 1700W x 1 @ 1 ohm
• Total RMS Power: 1700W
• CEA-2006 Compliant
• Wired Bass Remote Included
• Efficient Class D Design
• Dimensions: 10.1"W x 5.4"D x 2.0H
(28)
$214.99
• 600 watts x 1 channel @ 4 ohms
• 1000 watts x 1 channel @ 2 ohms
• Total RMS Power: 1000 watts
• Class D 2 ohms Stable Monoblock Amplifier
(2)
$399.99
Kicker CXA1800.1 (46CXA18001T)
• 900 watts x 1 channel @ 4 ohms
• 1800 watts x 1 channel @ 2 ohms
• 1800 watts x 1 channel @ 1 ohm
• Total RMS Power: 1800 watts
• Class D 1 ohms Stable Monoblock Amplifier
(10)
$399.96
• 875 watts x 1 channel @ 4 ohms
• 1750 watts x 1 channel @ 2 ohms
• 3500 watts x 1 channel @ 1 ohm
• Total RMS Power: 3500 watts
• Class D 1 ohms Stable Monoblock Amplifier
(6)
$99.99
Complete 2-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire
Complete 2-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire
Complete 2-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire
Complete 2-Channel 4 Gauge Amp Kit with RCA Cables and ANL Fuse Holder
Complete 2-Channel 4 Gauge Amp Kit with RCA Cables and Speaker Wire
4 Gauge 100% (OFC) Oxygen Free Copper Amplifier Power Wiring Kit with Speaker Wire
4 Gauge Power Amplifier Installation Kit
4 Gauge Power Amplifier Installation Kit
Add a 2-Channel amp without replacing your factory radio
Looking to fine tune the bass in your vehicle? Look no further
Maximize Your Bass Potential with an Audio Control’s legendary Bass Restoration Processor
16.4 ft of V-Series 2-Channel RCA Audio Premium Interconnect Cable with Dual Twisted Pair Hyper-Flex Technology
12 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)
Comes with everything you need to upgrade your power and ground wire.
12V High Performance AGM Power Cell Battery for Systems Up To 2000 Watts
Smart isolator - Monitors and auto-charging feature!
Great for isolating a second batter making it dedicated to the stereo system
Smart isolator - Monitors and auto-charging feature!
Smart isolator - Monitors and auto-charging feature!
Does not create a voltage drop to the second battery like conventional isolators
2.0 Farad Capacitor with Digital Red Display
Perfect for any installation and troubleshooting
Perfect for every toolbox
Impedance Meter / Signal Generator
Set your gains like a Pro, accurately and quickly
This is a must have! Set your crossover frequency like a Pro
Make installation a breeze with the XBTU
Accepts 4 gauge or 8-gauge wire
4/8 Gauge Mini ANL (MANL, AFS) Fuse Holder
Belva BAGUH2 AGU Fuse Holder
4/8 Gauge AGU Fuse Holder
Modular Linkable ANL Fuse Block
No-fail termination and current flow, it helps keep your system protected and running smoothly
4/8 Gauge Mini-ANL/MANL/AFS Fuse Holder
Mini-ANL (MANL/AFS) 80A Nickel Plated Fuses
Mini-ANL (MANL/AFS) 100A Nickel Plated Fuses
ANL 100A Nickel plated for better power transfer
Two fuses per order. High quality 200 Amp ANL Fuses
Two fuses per order. High quality 300 Amp ANL Fuses
Great for amplifiers that do not accept a large gauge power wire
Spade Terminals • 4 Gauge • 1 Red & 1 Black • Nickel Plated
4 Gauge Ring Terminals with 3/8" Opening (5 Pieces)
5 Pack of Black 4 Gauge Ring Terminals
(4-pack) 4 Gauge Solid Copper Ring Terminals with Shrink Tubing