Garage
Shop

800W Complete Kicker + RE Audio Bass Package

Kicker 11S10L32 10" Subwoofer + RE Audio DTS- 800.1 Amplifier + 8 Gauge Amp Kit + CD + SPL Meter

Kicker
Shop all Kicker
EXCLUSIVE
Product videos
highlight-star-icon

10" Dual 2 Ohm Solo-Baric L3 Series Subwoofer • 400W RMS • DTS Series Monoblock Class D Car Amplifier • Pulse Width Modulated MOSFET power supply • Bridgeable with multi link technology • Variable Bass Boost

Learn more about the 11s10l32_dts8001

We apologize

This item has been discontinued

Product Highlights


10" Dual 2 Ohm Solo-Baric L3 Series Subwoofer • 400W RMS • DTS Series Monoblock Class D Car Amplifier • Pulse Width Modulated MOSFET power supply • Bridgeable with multi link technology • Variable Bass Boost

Description


Kicker brand icon

Authorized dealer

Kicker and RE Audio Complete Bass Package

This Sonic Electronix Exclusive Bass package showcases a RE Audio DTS-800.1 Amplifier along with a Kicker 2011 S10L32 10" Subwoofer. This excellent bass package pushes 400 watts of clean, continuous RMS power. The Kicker Subwoofer has a Dual 2 Ohms Voice Coil; meant to be wired together in parallel to a final impedance of 1 Ohms. For more information regarding subwoofer wiring, please check out our Subwoofer Wiring Diagram.

This Kicker S10L32 Solo Baric Series subwoofer requires 400 watts of RMS power. The included RE Audio DTS-800.1 amplifier will compliment this required power by supplying a perfect matchup of certified RMS continuous power. This package also includes a 8 gauge amplifier kit which is perfect to supply power to the amplifier. As an added bonus we have included an AutoSound low frequency Test CD so that you can fine tune your audio system. A Scosche SPL Meter has also been includes so that you can test your db rating with a single push of a button

Kicker 2011 S10L32 Features:
  • 10" Dual 2 Ohm Solo-Baric L3 Series Subwoofer
  • Power Handling:
    • Peak: 800 watts
    • RMS: 400 watts
  • Impedance: Dual 2 ohm
  • Patented corner-ribbed, double-stitched Santoprene rubber surround
  • Stamped steel basket protects massive internal motion
  • Titanium deposit impregnated cone with rolled outer edge
  • Vented 360° back bracing
  • Rear foam gasket
  • Heat-dissipating, solid pole piece and high-temp coil wire for longer woofer life
  • Spring loaded terminals
  • Poly-cotton semi-progressive spider
  • Heat-dispersing, solid pole piece
  • Spiralead tinsel leads
  • High-temperature dual 2 ohms voice coils
  • Sensitivity: 85.3 dB
  • Other search terms: S10L3, S10L32, 10L3, 10L32, 11S10L32
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty
RE Audio DTS-800.1 Features:
  • DTS Series Monoblock Class D Car Amplifier
  • RMS Power Rating (14.4V)):
    • 4 ohms: 162 watts x 1 chan.
    • 2 ohms: 280 watts x 1 chan.
    • 1 ohm: 400 watts x 1 chan.
  • Dynamic power output: 800 watts x 1 chan.
  • Pulse Width Modulated MOSFET power supply
  • Wired remote bass level control included
  • LED power (green) and protect (red) indicators
  • Variable Bass Boost (0 to +12 dB bass boost at 45 Hz)
  • Bridgeable with multi link technology (MLT)
  • Mono channel operation
  • Preamp RCA outputs to daisy chain multiple amps
  • 2-Way System Protection circuitry (thermal and short circuit)
  • Dual speaker terminals simplify the hookup of multiple speakers
  • Heavy duty brushed aluminum alloy convection cooled heatsink for efficient heat dissipation
  • Nickel-plated RCA level inputs
  • Nickel-plated 12AWG screw terminals
  • Input Impedance: 20 K-Ohm
  • Input sensitivity:
    • Low level: 100mV-6V
  • Variable low-pass filter (40-180 Hz, 24 dB/octave)
  • Subsonic filter (17-50 Hz, 24 dB/octave)
  • Bass frequency (30-80 Hz)
  • Effective damping factor: 150 @ 4 ohms
  • Frequency response: 17-180 Hz
  • Dimensions: 8-1/16"L x 8-11/16"W x 2"H
  • 8-gauge power and ground wiring is required for installation.
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty
Audiobahn AKIT8J
  • 8 Gauge Amplifier Installation Kit
  • Premium power and ground wire provides optimal power transfer
  • AGU Fuse Holder with 80 amp AGU Fuse
  • Everything you need to hook up your system
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty
Amp Kit Includes:
  1. 20 Ft. Transparent blue 8 AWG power wire
  2. 17 Ft. Transparent 16 AWG speaker wire
  3. 20 Ft. Transparent twisted signal cable
  4. 20 Ft. Blue 18 AWG remote turn-on wire
  5. 4 Ft. Transparent silver 8 AWG ground wire
  6. 6 Ft. Black split loom
  7. 100 Amp AGU fuse
  8. AGU Fuse holder
  9. Terminals, Screws, Connectors and Cable Ties
AutoSound 2000 CD-101 Features:
  • The Low Frequency Test CD #101
  • Contains 99 tracks specifically designed and recorded for performing electronic and acoustic tests on audio systems
  • You can find low frequency resonance's in audio listening environments
  • Perform measurements on woofers and enclosures
  • Evaluate low level resolution of CD players and headunits
  • Woofer measurements include impedance, which can be plotted by using CD#101 in a CD player, a resistor, and a VOM (Volt-Ohm Meter)
  • Complete instructions are shipped with each disc
  • If you're serious about audio, this disc is a must-have
  • 1-year SonicElectronix.com warranty
Track List:
  • Track 1: 1 kHz tone at -20 DB (2:06) Helps you measure the reference loudness of a component
  • Track 2: 1 kHz tone at -20 dB, fades to black (3:55) Tests the reproduction quality of a sound system when driven with extremely low level signals
  • Track 3: Polarity Pulses (3 positive - 1 negative) (2:00) To measure relative and absolute polarity
  • Track 4: 20-20,000 Hz slow sweep (1:10) To take response measurements and to check for resonant frequencies
  • Track 5: 20-20,000 Hz fast sweep (:19)
  • Track 6: Sequential tones 20-20,000 Hz, twice (1:36) For use with test instruments that measure sequential tones
  • Track 7: Composite tones (2:04) Used for measurements with swept spectrum analyzers and to determine the overload threshold of a system
  • Track 8: 50 Hz square wave with sweep to 20 Hz (2:00) Used for setting up low-frequency servo systems
  • Track 9: Low-frequency bursts (1:27) Used to evaluate the transient behavior of a subwoofer system
  • Tracks 10-98: Frequencies corresponding to track numbers. The numerical track indicator of the CD player matches with the frequency that is recorded on that track, for example, track 10 = 10Hz
  • Track 99: 1 kHz at digital zero (2:36) Used to test the output headroom of a CD player
Scosche SPL1000F Features:
  • 130db Max Handheld SPL Meter
  • Measure dB range from 60 to 130 dB
  • Back light so you can always read the display of the SPL1000
  • Peak and minimum volume hold functions
  • Automatic turn off and low battery indicator
  • Ideal for setting up your home or car stereo system
  • Great for monitoring the noise level in an office or home
  • Push the limits of your mobile audio system and see just how loud it goes!
  • Compact Size
  • Handheld
  • Accurate Readings
  • Includes safety earplugs
  • Dimensions: 1-1/4"D x 2-1/8"W x 5"H
  • 1-year SonicElectronix.com warranty
2011 Kicker Authorized Online Dealer and eBay Seller

Specifications & Details


Amplifier Power Specifications
RMS Power @ 4 ohms
165 watts x 1 channel
RMS Power @ 2 ohms
280 watts x 1 channel
RMS Power @ 1 ohm
400 watts x 1 channel
Peak Power Output
800 watts x 1 channel
Amplifier Specifications
Amplifier Class
D
Number of Channels
1 - Mono
Total Peak Power Output
800 watts
Total RMS Power Output
400 watts
Maximum Input Gauge Size
4 AWG
Minimum Impedance Unbridged
1 ohms
Minimum Impedance Bridged
Not Bridgeable
Speaker Level Inputs
No
Preamp Outputs
1 pair
Built-in Crossover
Low-Pass (LP)
Low-Pass Crossover Frequency
40 - 180 Hz
Subsonic Filter
17 - 50 Hz
Signal-to-Noise Ratio
90 dB
Bass Boost
0 - 12 dB
Remote bass/level controller
Yes
Fan Cooled
No
Fuse Rating
40A x 1 
CEA-2031 Compliant
No
Subwoofer Specifications
Subwoofer Size
10"
Voice Coil(s)
Dual
Impedance (Per Voice Coil)
2 ohms
RMS Power Handling
400 watts
Total RMS Power Handling
400 watts
Peak Power Handling
800 watts
Total Peak Power Handling
800 watts
Woofer Surround
Santoprene Rubber
Woofer Composition
Titanium Deposit Impregnated w/ Rolled Outer Edge
Minimum Sealed Box Volume
0.8 cubic feet
Maximum Sealed Box Volume
3.0 cubic feet
Minimum Ported Box Volume
1.25 cubic feet
Maximum Ported Box Volume
2.25 cubic feet
Sensitivity
85.3 dB
Top-Mount Depth (Mounting Depth)
5-1/2"
Cutout Diameter
9-5/16"
Recommended Enclosure Type
Ported / Vented
Sealed
Warranty and Return Policy
Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Item Details


Manufacturer:

Model Number:

11S10L32_DTS-800.1

Weight:

20.43lbs

Internal SKU:

11s10l32_dts8001

Internal Product ID:

35239

Product and How-to Videos


  • Car Subwoofer Size Buying Guide | What Size of Sub Should I Get?
  • How To Install an Amplifier: Car Amplifier Basics Part 2

Customer Ratings & Reviews



5 star
69%
4 star
26%
3 star
0%
2 star
5%
1 star
0%



Durability
4.8
Value
4.5
Features
4.5
Design
4.6
Usability
4.7

Customer Reviews

Sort by:

Loading...

elogio

The following review is for SPL1000F, which is a part of the bundle you are viewing.

escelente produto recomendo a todos otimo acabento excelente qualidade melhor preço nota 10

By fernando on January 18, 2014

60

found this helpful.

Great Little Device!

The following review is for SPL1000F, which is a part of the bundle you are viewing.

I ordered this little gadget to check the SPL in my car. So, far it's been great. It is easy to use and has simple functions.

By Manny on June 18, 2012

60

found this helpful.

Great Buy!!!

The following review is for SPL1000F, which is a part of the bundle you are viewing.

Cheap works great had no problems with it. The light sensor for the back lighting is amazingly accurate. Not sure of the db reading accuracy. At least seams to be in the ballpark.

By Tecknodude180 on June 5, 2011

63

found this helpful.

It seems to work great

The following review is for SPL1000F, which is a part of the bundle you are viewing.

I've never owned a high end SPL meter so i can't compare, though it seems to match what the general db levels are. It is dbc which I didn't know and it doesn't say unless you look very closely at the picture. The meter itself works, though can be deceiving when measuring for the purpose of real world hearing because it only picks up low frequency sound. (Bass, car exhaust drone, etc). Not a fault, that's the point of C-weighted SPL meters.

By Andre on August 2, 2014

61

found this helpful.

A tool every sound engineer must have!!! Great Buy

The following review is for SPL1000F, which is a part of the bundle you are viewing.

I totally recommend the Scosche SPL100F Sound meter as it is very accurate and strong. Have been using it for a while now and have not experienced any issue with it. Pretty good stuff.

By Steve M on September 30, 2012

59

found this helpful.

To Be Honest

The following review is for SPL1000F, which is a part of the bundle you are viewing.

I thought this meter was reading correct 'til this punk at my school scored 1 db under me with 112 and about 200 watts RMS.

Turns out, I was metering 123ish, and in reality with a real SPL meter, I was metering 138

By POS on May 24, 2012

61

found this helpful.

Nice item

The following review is for SPL1000F, which is a part of the bundle you are viewing.

I am quite pleased with the SPL1000F. I actually use it in both my occupations: in my project studio for mixing/mastering, and at my job as a police supervisor, where I use it to monitor noise and sound complaints as to their validity.

By Tom on September 20, 2011

60

found this helpful.

Product does what it's suppose to do

The following review is for SPL1000F, which is a part of the bundle you are viewing.

I purchased this to help find out what level my speakers and headphones were putting out, well worth the price. Product is simple to use and effective.

By Edi on October 19, 2011

57

found this helpful.

ok meter you get what your paying for

The following review is for SPL1000F, which is a part of the bundle you are viewing.

The meter seems to work as designed. It will tell you the current db level, max and lowest db level. It seems to be consistent but I'm not sure how accurate.

By Marcus on March 10, 2014

58

found this helpful.

Useful For My Need

The following review is for SPL1000F, which is a part of the bundle you are viewing.

I use it to suggest adequate (not too loud as in public movie theatre) sound level in a movie theatre of old age people. A good tool.

By Pierre on January 10, 2012

56

found this helpful.

Add-ons


Related Searches


11S10L32_DTS-800.1 small

Item added to your cart.

Price: $234.06

Essential add-ons
40 Square Feet of Sound Dampening Material

Thicker than the competition, complete sound damping kit for entire vehicle! Use for trunk, doors, roof and floor.

$279.99

$89.99

Add to cart
Dynamat Sound Dampening Bulk Kit

Did you know sound dampening will reduce those annoying rattles and even increase your SPL?

$383.95

$235.99

Add to cart
Stinger Sound Dampening Bulk Kit

Stinger's Roadkill sound dampening series is sure to kill unwanted road noise and rattles! Enough sound dampening for the whole car!

$219.00

$140.99

Add to cart
NVX XBG3PK 1/0 Gauge OFC Big 3 Upgrade Kit

Comes with everything you need to upgrade your power and ground wire.

$114.99

$99.99

Add to cart
2" Universal, Professional Heavy Duty Roller for Sound Damping/Dampening

Universal rubber roller to make it easy to install sound dampening.

$9.99

$7.99

Add to cart
Five Piece Installer Panel Removal Tool Kit

Installer's Panel Removal Installation Tool Kit for Car Stereo, Speakers and Car Audio Installs

$18.99

$11.99

Add to cart
SMD DD-1 Distortion Detector

Set the gain of an audio amplifier quickly and accurately

$207.99

$199.99

Add to cart
Impedance Meter / Signal Generator

Easy to locate tuning frequencies of passive radiators and ported enclosures

$461.99

$451.99

Add to cart
Save up to 10 different vehicles in your garage

Loading...
Identify your vehicle and submodel details
  • Owner’s manual
  • Vehicle’s insurance card
  • Vehicle registration
  • Vehicle produced after 2005: Inside driver’s side door
  • Vehicle produced before 2005: Rear passenger doorjamb, glove box, center console, or engine compartment
Car Info Side Door Icon
Vehicle Registration Icon
Vehicle Insurance Icon