Garage
Shop

800W Crossfire + Sound Dampening Material Bass Bundle

10" Crossfire BMF1028 BFM Series Subwoofer + Cache CDM Dead Shield Sound Dampening Material

Crossfire
Shop all Crossfire
EXCLUSIVE
Product videos
highlight-star-icon

10" Dual 4 Ohm BMF Series Car Subwoofer • 800W Max • 400W RMS • Co-Polymer Cone • Four 12" x 36" Pieces of Dead Shield Sound Dampening Material • Eliminates Road Noise • Increases sound quality and output

Learn more about the bmf1028_cdm

We apologize

This item has been discontinued

Product Highlights


10" Dual 4 Ohm BMF Series Car Subwoofer • 800W Max • 400W RMS • Co-Polymer Cone • Four 12" x 36" Pieces of Dead Shield Sound Dampening Material • Eliminates Road Noise • Increases sound quality and output

Description


Crossfire plus Sound Dampening Material Bass Bundle

This Sonic Electronix Exclusive Bundle showcases a 10" Dual 4 Ohm Crossfire BMF series Subwoofer. This subwoofer is rated at 400 watts RMS of continues power and 800 watts of Max power. The subwoofer is equipped with a co-polymer cone material and stitched rubber surround for rigidity and performance. It is also equipped with spring loaded terminals for a secure installation. Along with Flexible Impedance Technology (FIT), dual stacked 85 oz magnet structure, and 2-1/2" voice coil, make this Crossfire BMF series subwoofer the perfect solution when adding bass to your audio system. In order to improve the all around sound of your audio car system, this bundle also includes four 12" x 36" pieces of Dead Shield sound dampening material. This dampening material will help reduce engine noise, vibrations, road noise and rattling to give you a higher sound quality. Four step peel and stick application makes installation simple and efficient. This sound dampening material is sure to improve the over all quality and output of your system.

Crossfire BMF1028 Features:
  • 10" Dual 4 Ohm BMF Series Car Subwoofer
  • Power Handling:
    • Peak: 800 watts
    • RMS: 400 watts
  • Impedance: 4 Ohms
  • Co-polymer cone material
  • Stitched rubber surround
  • Proprietary chrome aluminum cast frame
  • Flexible Impedance Technology (FIT)
  • Dual Voice Coil (DVC) impedance selector
  • Chromed signature etched back plate
  • Chrome plated extended/vented back plate
  • Compression nickel-plated sprig loaded input terminals
  • Designed for both vented and sealed enclosures
  • 2-1/2" 4 Layer Dual 4 Ohm Kapton voice coil
  • Dual 85 oz. ceramic stacked magnet structure
  • Frequency response: 20-250 Hz
  • Sensitivity: 83.4 dB
  • Xmax: 14mmm
  • Mounting depth: 5-7/8"
  • Cutout dimensions: 9-1/2"
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty
Cache CDM Features:
  • Four 12" x 36" Pieces of Dead Shield Sound Dampening Material
  • Eliminates Road Noise
  • Quiets Vibrations
  • Stops Rattles
  • Increases SPL
  • Reduces Heat
  • Simple To Install
  • Easy To Form Aluminum
  • Four step peel and stick installation
  • Increases sound quality and output
  • Up to 30% thicker than the leading competitors
  • Dimensions (each piece): 12"L x 36"W

Subwoofer Wiring Guide


Specifications & Details


Subwoofer Specifications
Series
BMF Series
Warranty and Return Policy
Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Item Details


Manufacturer:

Model Number:

BMF1028_CDM

Weight:

29.30lbs

Internal SKU:

bmf1028_cdm

Internal Product ID:

37477

Product and How-to Videos


Customer Ratings & Reviews



5 star
100%
4 star
0%
3 star
0%
2 star
0%
1 star
0%



Durability
5
Value
5
Features
5
Design
5
Usability
5

Customer Reviews

Sort by:

Loading...

Excellent product

The following review is for CDM, which is a part of the bundle you are viewing.

This is great material and is very easy to put on with a heat gun!

By Matt on May 23, 2012

23

found this helpful.

Great package deal value.

The following review is for CDM, which is a part of the bundle you are viewing.

I recieved this as part of a package deal. It is enough to cover the lid of my 98 Civic sedan trunk. This will clean up the sound of your lows by decreasing noise (rattles, distortion of sound, etc). This is the first step in noise reduction and everybody should start here.

I doubt it will create a noticable increase in sound from your speakers.

Very flexible, sticks like crazy! Easy to work with.

By Tyler on December 21, 2011

21

found this helpful.

Great Price and Product

The following review is for CDM, which is a part of the bundle you are viewing.

I found the price great for the product I got. Installation was very easy, product sticks very well (Remember to clean/prep the surface). I noticed a difference right away in my music as well as overall noise level while driving on the highway (Doors done - trunk is next). Not the thickest sound dampening out there but it def. helps :)

By Jeremy on April 2, 2012

22

found this helpful.

The battle against rattle

The following review is for CDM, which is a part of the bundle you are viewing.

Got the sound dampening door kit with some speakers, the installer put it on the rear deck of my vehicle where my two rear speakers and factory sub are. The difference is night and day, expensive but quality, good to get with speakers or a sub.

By robert paulson on July 14, 2011

20

found this helpful.

Add-ons


Similar Products

Best selling similar products

Kicker 47KBRW10 ReFLEX™

• 10" ReFLEX™ Passive Radiator
• Rubber covered plastic Cone
• Rubber Surround

$59.99

NVX VCW104 Version 3 (VCW104v3)

• RMS Power Range: 650-800 watts
• Pressed Paper Cone Carbon Fiber Top
• Dual 4-ohm Voice Coil
• High Excursion Foam Surround
• Dual Progressive Spiders with Integrated Tinsel Leads

(62)

$109.99

JL Audio 10W0v3-4

• RMS Power: 300 watts
• Impedance: Single 4 ohms
• Polypropylene Cone
• Foam Surround
• Mount depth: 4.90"
• Sensitivity: 84.07 dB

(53)

$139.99

NVX VSW104 Version 2 (VSW104v2)

• 10" VS-Series Subwoofer
• Dual 4-ohm Voice Coil
• RMS Range: 500 Watts
• Non-Pressed Paper With Woven Carbon Fiber Top
• High Excursion Foam Surround
• Stamped Steel Basket
• Single Nomex Spider

(27)

$74.99

Kicker CompVR CVR104 (43CVR104)

• Peak Power: 700 watts
• RMS Power: 350 watts
• Impedance: Dual 4 ohms
• Sensitivity: 83.6 dB
• SoloKon Polypropylene Cone
• Santoprene Rubber Surround
• Mount depth: 5-1/2"

(14)

$89.96

Related Searches


BMF1028_CDM small

Item added to your cart.

Price: $69.35

Essential add-ons
NVX 20 ft. of True Spec 8 Gauge Speaker Wire

Flexible multi-strand cable bends and twists to meet your installation needs.

$64.99

$49.99

Add to cart
Belva 23 ft. of 12 Gauge Speaker Wire

Ultra-flexible PVC blended jacket for easy installation.

$14.99

$6.99

Add to cart
NVX SDTK20

20 Square Feet of Sound Damping Material

$89.99

$59.99

Add to cart
Stinger RKXTK

Stinger's Roadkill sound dampening series is sure to kill unwanted road noise and rattles! Enough sound dampening for your whole trunk!

$209.00

$92.99

Add to cart
Dynamat Trunk Kit

Did you know sound dampening will reduce those annoying rattles and even increase your SPL?

$236.95

$149.95

Add to cart
NVX SDRLR1 Sound Damping Rubber Roller

Universal Professional Heavy Duty Roller for Sound Damping

$9.99

$7.99

Add to cart
NVX SDRLR2 Sound Damping Rubber Roller

Universal Professional Heavy Duty Roller for Sound Damping

$11.24

$8.99

Add to cart
Belva BAMMD1

Six Function Digital Multimeter

$14.99

$6.99

Add to cart
Belva BAMMD3

Nine Function Digital Multimeter

$29.99

$9.99

Add to cart
Save up to 10 different vehicles in your garage

Loading...
Identify your vehicle and submodel details
  • Owner’s manual
  • Vehicle’s insurance card
  • Vehicle registration
  • Vehicle produced after 2005: Inside driver’s side door
  • Vehicle produced before 2005: Rear passenger doorjamb, glove box, center console, or engine compartment
Car Info Side Door Icon
Vehicle Registration Icon
Vehicle Insurance Icon