Garage
Shop

2300W Boss + Visonik Bass Bundle

Boss P126DVC Phantom Series 12" Subwoofer + Visonik VK1600.1D Amplifier + 4 Gauge Amplifier Kit

Boss
Shop all Boss
EXCLUSIVE
Product videos
highlight-star-icon

12" Dual 4 ohm Phantom Series Subwoofer • 2300W MAX • 1150W RMS • Visonik Monoblock Power Amplifier • MOSFET Power Supply • Variable Bass Boost • Variable Low-Pass Filter • Complete 4 Gauge Amp Kit • Perfect For 1600 Watts Amplifier Setup

Learn more about the vk16001d_p126dvc

We apologize

This item has been discontinued

Product Highlights


12" Dual 4 ohm Phantom Series Subwoofer • 2300W MAX • 1150W RMS • Visonik Monoblock Power Amplifier • MOSFET Power Supply • Variable Bass Boost • Variable Low-Pass Filter • Complete 4 Gauge Amp Kit • Perfect For 1600 Watts Amplifier Setup

Description


Boss brand icon

Authorized dealer

Power Acoustik and Visonik Bass Bundle

This Sonic Electronix Exclusive Bass package showcases a Visonik VK1600.1D amplifier along with a 12" Phantom Series, Boss Subwoofer. This excellent bass package pushes 1150 watts of clean, continuous RMS power. The Boss Subwoofer has Dual 4 Ohm Voice Coils; meant to be wired in parallel, to a final impedance of 2 Ohms. For more information regarding subwoofer wiring, please check out our Subwoofer Wiring Diagram.

This Boss P126DVC Phantom Series subwoofer requires 1150 watts of RMS power. The included Visonik VK1600.1D amplifier will compliment this required power by supplying a perfect match-up of certified RMS continuous power. This package also includes a complete 4 gauge amplifier kit, which is perfect to supply power to the amplifier. With the Boss subwoofer, Visonik amplifier, and The Install Bay amplifier kit, this bass bundle is great for anyone looking to upgrade their vehicle's audio system

Boss P126DVC Features:
  • 12" Dual 4 ohm Phantom Series Subwoofer
  • Power Handling:
    • Peak: 2300 watts
    • RMS: 1150 watts
  • Impedance: Dual 4 ohm
  • Black metallic injection molded polypropylene cone
  • Butyl rubber surround
  • Designed for use in sealed and ported enclosures
  • 2-1/2" High temperature Kapton voice coil
  • Large magnet with protective cover
  • Mounting Depth: 6-13/16"
  • Frequency response: 25-2,000 Hz
  • Sensitivity: 96 dB
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty
Visonik VK1600.1D Features:
  • Visonik Mono Block Power Amplifier
  • RMS Power Rating:
    • 4 ohms: 800 watts x 1 chan.
    • 2 ohms: 1600 watts x 1 chan.
  • Class D Mono Block amplifier
  • Low noise line level inputs
  • Single frequency adjustable bass boots EQ
  • Low-pass butterworth crossover designs
  • Internal differential drive Preamp inputs
  • Low noise, low distortion full signal path circuit topology
  • Complete differential feedback ground loop control
  • MOSFET P.W.M power supply
  • LED power and protect indicators
  • Fully regulated Preamp power supply
  • Four-way amplifier protection (thermal, short circuit, overload, and DC offset)
  • Delayed turn on / turn off circuitry
  • Isolated signal and power grounds
  • Fast acting power supply capacitor banks
  • Variable Bass Boost (0-12 dB)
  • Adjustable sensitivity range: 0.2-6v
  • Single channel operation
  • Variable Low-Pass Filter (50-250 Hz), (12dB, 24dB)
  • Subsonic Filter: 10Hz-60Hz
  • Frequency Response: 250,000 Hz
  • THD (Total Harmonic Distortion): 0.01%
  • Fuse: 25A x 2
  • Dimensions: 13"D x 8-13/16"W x 2-1/4"H
  • 4-gauge power and ground wiring is required for installation.
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty
The Install Bay AK4 Features:
  • Complete 4 Gauge Amplifier Installation Kit with RCA Interconnect Cables
  • Perfect for 1600 watts amplifier setup
  • Includes everything that you need to install a single amplifier
  • Premium power and ground cable
  • 1-year Manufacturer's warranty
The Install Bay AK4 Includes:
  1. 17 ft. of Blue power cable
  2. 3 ft. of Black ground cable
  3. 17 ft. of Clear/blue RCA cable
  4. 25 ft. of Speaker wire
  5. 17 ft. of Remote turn-on wire
  6. In-line AGU fuse holder
  7. 60 Amp AGU fuse
  8. Installation hardware

Specifications & Details


Amplifier Power Specifications
RMS Power @ 4 ohms
800 watts x 1 channel
RMS Power @ 2 ohms
1600 watts x 1 channel
RMS Power @ 1 ohm
Not Stable
Amplifier Specifications
Amplifier Class
D
Number of Channels
1 - Mono
Total RMS Power Output
1600 watts
Maximum Input Gauge Size
4 AWG
Minimum Impedance Unbridged
1 ohms
Minimum Impedance Bridged
Not Bridgeable
THD at Rated RMS Power
.01%
Speaker Level Inputs
Yes
Preamp Outputs
No
Built-in Crossover
Low-Pass (LP)
High-Pass Crossover Frequency
Not Specified
Low-Pass Crossover Frequency
50 - 250 Hz
Subsonic Filter
10 - 60 Hz
Signal-to-Noise Ratio
Not Specified
Channel Separation
Not Specified
Bass Boost
0 - 12 dB
Remote bass/level controller
Yes
Fan Cooled
No
Fuse Rating
25A x 2 
CEA-2031 Compliant
No
Subwoofer Specifications
Number of Subwoofers
1
Subwoofer Size
12"
Voice Coil(s)
Dual
Impedance (Per Voice Coil)
4 ohms
RMS Power Handling
1150 watts
Total RMS Power Handling
1150 watts
Peak Power Handling
2300 watts
Total Peak Power Handling
2300 watts
Woofer Surround
Butyl Rubber
Woofer Composition
Injection Molded Polypropylene - IMPP
Minimum Sealed Box Volume
0.8 cubic feet
Maximum Sealed Box Volume
0.8 cubic feet
Minimum Ported Box Volume
1.2 cubic feet
Maximum Ported Box Volume
1.2 cubic feet
Sensitivity
96 dB
Frequency Response
25 - 2,000 Hz
Xmax (millimeters)
8 mm
Top-Mount Depth (Mounting Depth)
6-13/16"
Cutout Diameter
11"
Recommended Enclosure Type
Ported / Vented
Sealed
Warranty and Return Policy
Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Item Details


Manufacturer:

Model Number:

VK1600.1D_P126DVC

Weight:

27.55lbs

Internal SKU:

vk16001d_p126dvc

Internal Product ID:

37935

Product and How-to Videos


  • Car Subwoofer Size Buying Guide | What Size of Sub Should I Get?
  • How To Install an Amplifier: Car Amplifier Basics Part 2

Customer Ratings & Reviews



5 star
58%
4 star
26%
3 star
10%
2 star
2%
1 star
3%



Durability
4.2
Value
4.6
Features
4.3
Design
4.7
Usability
4.6

Customer Reviews

Sort by:

Loading...

has it all

The following review is for AK4, which is a part of the bundle you are viewing.

Kit has everything you need for a hassle free installation, I was thinking I wasn't going to need it, but was glad I had it after things got going.

By steven on September 10, 2012

100

found this helpful.

Love

The following review is for AK4, which is a part of the bundle you are viewing.

I bought this my my 2007 jetta. It work really good the it was easy to put on. I would buy this again.

By Kiera on February 1, 2013

98

found this helpful.

2nd time with this install bay kit

The following review is for AK4, which is a part of the bundle you are viewing.

its a great kit for the price. I bought it once for a buddys Suby and then for my father in laws econoline van. never had a problem with either. sonic can be slow at shipping. but if on a budget this kit kicks butt for the price....not much online can compare for a 4 gauge and price. never a problem with feed back or crappy rca. might have to get a few better connectors but hey its a given. anyways great kit. also great for a basic systems. I wouldn't run more then 100 amps of power max.

By marklar on September 17, 2013

94

found this helpful.

Great Value!!!

The following review is for AK4, which is a part of the bundle you are viewing.

If your looking for an amp install kit with all of the necessities that doesn't cost and arm and a leg this is it. The kit came with everything needed to get power to my amp the length was perfect for a extended cab pickup. The RCA's lack a little but I just used these single channel RCA's to run my sub amp and I bought some Streetwire 4 ch RCA's for the 4 ch amp and it's turned out great. I've always had good luck with Install Bay products!!! I would recommend to any one in search of a good Amp Install Kit!!!

By Dalton on October 5, 2013

93

found this helpful.

Does what its suppose to do!

The following review is for AK4, which is a part of the bundle you are viewing.

This product is exactly what it is, a kit! I LOVE IT, everything i needed was included and durable! the 4ga wire is true to size! (not just labeled 4ga IT REALLY IS!) if needed, id purchase again!

By Alex on August 14, 2012

93

found this helpful.

New amp kit

The following review is for AK4, which is a part of the bundle you are viewing.

Not much to review, It works fine. The only issue is that the power cable doesn't fit into the fuse holder. The fuse glass and holder plastic actually cracked when trying to close it. I'm sure I'll have to replace them soon. Other then that, it's good enough to power my amp with no issues. Yes, I would recommend it to others, just be careful when connecting the fuse holder and power wire. Don't use force!

By Rey on November 12, 2013

93

found this helpful.

Wow

The following review is for P126DVC, which is a part of the bundle you are viewing.

I just got 2 of these an I was thinking that they wouldn't be all that great but Ive owned kicker 12's and SPL 10's but these are the best. I've never had speakers over heat a 1000 watt amp but these did their a great sub for a cheap price but my advice is get a amp that can push them

By Seth on June 18, 2010

88

found this helpful.

Decent for the money

The following review is for AK4, which is a part of the bundle you are viewing.

I originally bought and 8 gauge cuz that's what my amp called for, it was a joke so I returned it and got this 4. Easy return/ exchange. Sounds like it happens a lot...
I think these kits are measured on the outside including plastic diameter not the inside wire.

Anyways buy the next size down from what you need. Kit came with lots of little parts to make the install ez. Would buy again for a 200-400 watt amp

By Land rover on November 7, 2013

88

found this helpful.

Decent Install Kit

The following review is for AK4, which is a part of the bundle you are viewing.

This kit isn't too bad it does the job. The fuse holder seems a little bit cheap on the plastic material but it works. The power cable held up to my abuse when I ran it through my tight space trims in my vehicle and I had to really pull them hard to get through. The RCA cable is a bit thin but I used it for my subs anyways so no problems there.

By Michael on September 10, 2012

88

found this helpful.

AK4

The following review is for AK4, which is a part of the bundle you are viewing.

Bought the Installbay AK4, pretty decent pricing although its wire is very brittle and falls apart when splicing it so be careful. Also remember your going to need a crimping tool so look for one before getting too excited. Overall good product, no problems encountered

By image on March 3, 2011

87

found this helpful.

Add-ons


Related Products

This item is frequently compared to these items

Boss P126DVC

• 2300 Watts
• 1150 Watts
• Black Metallic Injection Molded Polypropylene Cone
• 2-1/2" High Temperature Kapton Voice Coil

(161)

$95.99

Install Bay 4 Gauge Amplifier Power Wiring Kit (AK4)

• 4 Gauge Amplifier Installation Kit with RCA Interconnect Cables
• Perfect for 1600 Watts Amplifier Setup
• 17ft. Blue Power Cable
• 3ft. Black Ground Cable
• 17ft. Blue RCA Cable

(114)

$29.99

Related Searches


VK1600.1D_P126DVC small

Item added to your cart.

Price: $152.07

Essential add-ons
Belva BAK42 4 Gauge Amplifier Installation Kit

Great amps need great wire at a great price. This amp kit has everything you need!

$59.99

$34.99

Add to cart
NVX XKIT42 100% OFC True 4 Gauge Wiring Kit with RCA Cables and Speaker Wire

The reviews speak for themselves, this is awesome wire with everything you need!

$114.99

$99.99

Add to cart
20 Square Feet of Sound Dampening Material

NVX Sound dampening is thicker than competitors, eliminates rattles and gives you bigger bass!

$89.99

$59.99

Add to cart
Dynamat Sound Dampening Trunk Kit

Did you know sound dampening will reduce those annoying rattles and even increase your SPL?

$236.95

$149.95

Add to cart
Stinger Sound Dampening Trunk Kit

Stinger's Roadkill sound dampening series is sure to kill unwanted road noise and rattles! Enough sound dampening for your whole trunk!

$209.00

$92.99

Add to cart
NVX XBG3PK 1/0 Gauge OFC Big 3 Upgrade Kit

Comes with everything you need to upgrade your power and ground wire.

$114.99

$99.99

Add to cart
2" Universal, Professional Heavy Duty Roller for Sound Damping/Dampening

Universal rubber roller to make it easy to install sound dampening.

$9.99

$7.99

Add to cart
Five Piece Installer Panel Removal Tool Kit

Installer's Panel Removal Installation Tool Kit for Car Stereo, Speakers and Car Audio Installs

$18.99

$11.99

Add to cart
SMD DD-1 Distortion Detector

Set the gain of an audio amplifier quickly and accurately

$207.99

$199.99

Add to cart
Impedance Meter / Signal Generator

Easy to locate tuning frequencies of passive radiators and ported enclosures

$461.99

$451.99

Add to cart
Save up to 10 different vehicles in your garage

Loading...
Identify your vehicle and submodel details
  • Owner’s manual
  • Vehicle’s insurance card
  • Vehicle registration
  • Vehicle produced after 2005: Inside driver’s side door
  • Vehicle produced before 2005: Rear passenger doorjamb, glove box, center console, or engine compartment
Car Info Side Door Icon
Vehicle Registration Icon
Vehicle Insurance Icon