Garage
Shop

400W Boston Acoustics Single 12" Complete Bass Package + Sound Dampening Kit

Boston Acoustics Single 12" Ported Loaded Subwoofer Enclosure+GTA-2602 2-Channel Amp + NVX Trunk Kit+ Amp Kit

EXCLUSIVE
highlight-star-icon

12" Single 4 Ohm GTuned Series Ported Loaded Car Subwoofer Enclosure • 400W MAX • 200W RMS • 4 Ohm Impedance • PowerVent™ Tuning • SureSet™ Overdrive Protection • Radialvent® Cooling • 34 Hz Frequency Response • GTA Series Class AB 2-Channel Amplifier • 60W x 2 Chan. @ 4 Ohm • 100W x 2 Chan. @ 2 Ohm • Complete 8 Gauge Amplifier Installation Kit with RCA Interconnect Cables • 20 Square Feet of Sound Dampening Material (Five 18" x 32" Pieces)

Learn more about the g112ps_gta602

We apologize

This item has been discontinued

Description


Boston Acoustics G112PS

400W Peak GTuned Series Single 12" High Performance Ported Loaded Subwoofer Enclosure
Quantity: 1

Subwoofer Features:
  • 12" Single 4 Ohm GTuned Series Ported Loaded Car Subwoofer Enclosure
  • Power Handling:
    • Peak: 400 watts
    • RMS: 200 watts
  • Impedance: 4 Ohms (wired internally for final impedance)
  • PowerVent™ tuning for optimum efficiency, impact and extension
  • High quality MDF enclosure with glued and dado ends
  • Heavy-duty nickel plated input terminals accept up to 10 AWG wire
  • SureSet™ overdrive protection
  • High temperature 2" 4-layer voice coil
  • Radialvent® cooling, for increased power handling
  • Black and Gray two-tone automotive grade carpet
  • Q-Tune Setting: 32 Hz @ 1.0
  • Frequency Response: 34 Hz
  • Fuse Size: 4 Amp ATC
  • 1-year Manufacturer's warranty
Enclosure Features:
  • Single 12" Loaded, Ported Enclosure
  • Over-sized port
  • Heavy duty nickle plated spring-loaded binding posts
  • Black and Gray two-tone automotive grade carpet
  • Dimensions: 12-1/8"TD x 15-1/8"BD x 27-1/4"W x 13-1/8"H

Boston Acoustics GTA-602

200W 2-Channel Class AB GTA Series Amplifier
Quantity: 1

Product Features
  • 2-Channel Class AB GTA Series Amplifier
  • RMS Power Rating:
    • 4 ohms: 60 watts x 2 chan.
    • 2 ohms: 100 watts x 2 chan.
    • Bridged, 4 ohms: 200 watts x 1 chan.
  • MOSFET power supply
  • Optional Bass Remote available Boston Acoustics GTA-RSL(remote level control sold separately)
  • LED power and protect indicators
  • SST (Symmetrical Signal Topology) system uses balanced asymmetrical inputs for noise cancellation
  • Fully adjustable Q-Tune circuitry for simple bass output optimization
  • Recessed control panel for clean installation
  • IMS (Integral Mounting System) reduces the amplifier footprint
  • All input/output connections are located on one side of the amplifier to ease installation and wire management
  • Optimal angled speaker and power blocks for easy wire connections
  • 2-Channel/Mono operation
  • Speaker-level (high-level) inputs with signal sensing for automatic turn-on
  • Preamp RCA outputs to daisy chain multiple amps
  • 3-Way System Protection circuitry (thermal, overload, and speaker short protection)
  • Fully adjustable and selectable lowpass/highpass crossovers
  • Wrap-around heatsink design for extreme heat dissipation
  • Gold-plated RCA level inputs
  • Gold-plated screw terminals
  • Variable High-Pass Filter (50-200 Hz, 12 dB/octave)
  • Variable Low-Pass Filter (50-200 Hz, 12 dB/octave)
  • THD (Total Harmonic Distortion): 1%
  • Signal to Noise Ratio: 90 dB
  • Frequency Response: 10-50,000 Hz
  • Input Voltage: 14.4 volts
  • Fuse Rating: 20 amp x 1
  • CEA-2006 compliant amplifier
  • Dimensions: 8-3/8"D x 9-3/8"W x 2-3/8"H
  • 8-gauge power and ground wiring is required for installation. Contact us for information regarding a discount on select amplifier kits when purchased together with this amplifier.
  • 1-year Manufacturer's warranty

Belva BAK82

8 Gauge Premium (CCA) Copper Clad Aluminum Complete 2-Channel Amplifier Wiring Kit with RCA for Amplifiers up to 600 Watts - RED
Quantity: 1

Product Details:

  • Complete 8 Gauge 2-Channel Amplifier Installation Kit
  • Designed for car audio systems up to 600 watts RMS
  • Premium Powerflex power and ground wire provides optimal power transfer
  • Belva CCA wire is made from 30% copper while the competition uses only 10%
  • Helical Twist Construction Audio Interconnect RCA cables minimize noise and interference
  • MINI-ANL Fuse holder with a 60 amp fuse offers ideal protection for high powered systems
  • Complies to American Wire Gauge standards
  • Also available in Blue
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

Kit includes:

  1. 17 ft. (5.2 meters) Red 8 gauge power wire
  2. 3 ft. (.91 meters) Black 8 gauge ground wire
  3. 17 ft. (5.2 meters) Gray 18 gauge remote lead wire
  4. 17 ft. (5.2 meters) Helical Twist 2-channel RCA interconnect cable
  5. 20 ft. (6.1 meters) 16 Gauge Speaker cable
  6. One MINI-ANL Fuse Holder with a 60 amp fuse
  7. One Black rubber firewall grommet
  8. One 8 Gauge Red chrome plated ring terminals
  9. One 8 Gauge Black chrome plated ring terminal
  10. Three 18 Gauge Red Spade terminal
  11. Two 18 Gauge Black Spade terminal
  12. One 18 Gauge Red butt connector
  13. Ten 4" Black zip ties

NVX SDTK20 - 90mil 2.3mm THICK

Trunk Kit - 20 Square Feet of Sound Damping Material (Sound Deadening) (Five 18" x 32" Pieces)
Quantity: 1

Product Features

  • Five 18" x 32" Pieces of Sound Dampening Material
    • 90.55mil thick (2.3mm)! There are cheaper, inferior solutions at 50-80mil, but we do not recommend that thin of a solution as it will not perform as well.
  • 20 Square feet total
  • Vehicle/car trunk sound damping kit
  • Made from 100% Butyl Rubber
  • Eliminates road noise
  • Quiets vibrations
  • Increases sound quality and output of car audio system
  • Stops rattles
  • Increases SPL
  • Reduces heat
  • Easy to form aluminum conforms to desired area of vehicle with ease
  • Four step peel and stick design for easy installation
  • Up to 30% thicker than the leading competitors
  • Dimensions (each piece): 18"L x 32"W
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty



Item Details


Manufacturer:

Model Number:

G112PS_GTA-602

Weight:

69.00lbs

Internal SKU:

g112ps_gta602

Internal Product ID:

46568

Customer Ratings & Reviews



5 star
84%
4 star
13%
3 star
3%
2 star
0%
1 star
0%



Durability
4.8
Value
4.8
Features
4.7
Design
4.8
Usability
4.8

Customer Photos & Videos


Customer Reviews

Sort by:

Loading...

BAK 82

The following review is for BAK82, which is a part of the bundle you are viewing.

Nice package, quality wire but could more end connectors for the larger wire.

By Sam on June 19, 2014

160

found this helpful.

Good product

The following review is for BAK82, which is a part of the bundle you are viewing.

It's exactly what you need for your car amp installation. I bought this kit with Kenwood KAC-1502S amp for 75 bucks. Good deal from Sonic Electronix.

By Collins on January 6, 2014

148

found this helpful.

Don't know what the other guy is talking about.

The following review is for BAK82, which is a part of the bundle you are viewing.

This kit was awesome and included with my package that I bought. In comparison to others for the same price, there is simply not a comparison and the other review is just wrong on so many levels I felt compelled to write this.

The reality is there are a lot of real shoddy amp kits and wire as a whole being used in car audio in terms of cheap amp kits that have over-insulating wires and fake gauge ratings, huge amounts of aluminum, lousy RCA cables, fuse holders and other accessories. BUT and a BIG BUT, this kit excels in those areas where others fall flat on their face. I have bought a few inexpensive 8 gauge kits in my day and XScorpion, Raptor, Install Bay and others haven't even given me the 8 gauge of wire that I paid for, and in some cases gave me wire that heated up to a dangerous level due to the actual make up of the wire.

I also literally laughed when I see that the other reviewer was intending to use spade terminals to connect his amp power and ground wire... It is for the SPEAKER wire knucklehead :-). I am an installer and the smaller accessories work just fine when you use them correctly. Most amps will still work with them when used with the speaker wire. Of course one can be used for the remote wire connection to the amp and the other end with the butt connector being used to connect to the stereo. The funny thing is, if you do not need them, who cares? It is like ordering this kit for a compact car or single cab pickup. You will not use all of the power wire for these applications, so do you complain that the manufacturer gave you extra wire? That just made me laugh.

Now, onto the other accessories. The AFS fuse and holder that are included are so far superior to others in this price range and the amount of copper (albeit CCA) is much better than others in the price range. Lastly, the RCAs included are awesome for the price. I cannot find ANYTHING to complain about here for $21.99.

All in all, you will not get a better value for the money.

By Double Down on August 14, 2012

138

found this helpful.

Great kit for the cost

The following review is for BAK82, which is a part of the bundle you are viewing.

Very nice kit for $18.
Wire seems adequately thick. Good quality fuse (not AGU) and fuse holder. RCA's feel durable. Decent assortment of accessories. All together a solid budget kit IMO.

By n2audio on September 24, 2014

143

found this helpful.

NVX!

The following review is for SDTK20, which is a part of the bundle you are viewing.

Excellent product. Thicker and cheaper than dynamat and boy does it work well. Got 100 square feet of this and treated my entire vehicle. Road noise is reduced. Temperature is more even in the Cabin. Doors sound way more solid when closed(Used 3 layers on the inner most part of the door and one layer on the outer part, under the door skin, to seal it up) car stereo sounds amazing now. Even at highway speeds. I really recommend this product for a vehicle that is overly loud or if you are a car audio enthusiasts. Worth the $$ but set aside pleanty of time. Took my brother and I over 60 man hours! Lol

By clayton on September 19, 2013

129

found this helpful.

Good product for the price

The following review is for BAK82, which is a part of the bundle you are viewing.

Good wiring package, good quality fuse holder and wires, I would like more connectors on it and maybe some tube for the power wire, but overall is a good kit.

By Alfredo on October 29, 2014

139

found this helpful.

Good Purchase

The following review is for BAK82, which is a part of the bundle you are viewing.

I used this kit to install a 2 channel Boss amp. The quality of the pieces in this kit is five stars, but I'm giving it 4 because it is my belief that to do a clean install you need (4) 8 gauge terminals (one at the batt, one at the amp, one at ground, one at the amp), not just two. I had to spend an extra six bucks at Orchard for the extra terminals, but since the cost of the kit here at Sonic was only $20 at the time, it was still a good deal.

By Jumbo Dumbo on December 19, 2013

130

found this helpful.

Good kit

The following review is for BAK82, which is a part of the bundle you are viewing.

Good kit for basic setups. Using it right now in my mothers system powering a simple 12. Could handle more if needed.

Pros: Handles power, Wires are HQ, More copper than rubber, Wires are good length, Fuse is HQ, Comes with lots of ties and rubbers.

Cons: None

I would recommend this kit to anyone who has a simple system. All around good kit.

By Mitch on January 31, 2014

137

found this helpful.

Great wiring kit

The following review is for BAK82, which is a part of the bundle you are viewing.

works great on my MB Quart 2x100 watt amp.

By Eric on November 29, 2013

128

found this helpful.

Good Kit

The following review is for BAK82, which is a part of the bundle you are viewing.

Great kit for the price. the price is good. Long wires.

By Joshua on December 8, 2013

129

found this helpful.

Add-ons


Similar Products

Best selling similar products

NVX QBUS8P

• Low Profile Ported Subwoofer System
• 150 Watts RMS
• Built-In Class D Amplifier
• Variable Bass Boost
• Speaker-Level Inputs
• Wired Remote Bass Level Control

(6)

$129.99

NVX QBSTA

• 11" Spare Tire Subwoofer System
• Built-In Class D Amplifier
• Top-mount amplifier controls
• Speaker-Level Inputs
• Wired Remote Bass Level Control

$249.99

Pioneer TS-WX1210AM

• 350 watts Single 12" Subwoofer Enclosure
• 4 ohms Impedance
• Spring-loaded Terminal Posts
• Enclosure Dimensions: 10" TD x 12-1/2" BD x 19-3/4" W x 14-7/8" H

(2)

$179.99

MTX Audio TNP212D2 Terminator Dual Subwoofer Package + Amplifier

• 800W Peak (2 Subs)
• 400W RMS (2 Subs)
• 48oz. Magnet
• Terminator Series Class D Monoblock Car Amplifier
• Heavy 5/8" MDF Construction
• Black Carpeting

(153)

$279.95

Belva BPKG210v2 Dual 10" Subwoofer and Amp Package with Box and Wiring Kit

• Works with both Factory and Aftermarket Audio Systems
• Dual 10" Belva Subwoofers
• Monoblock Amp with Bass Knob
• Ported Enclosure
• Complete Amp Wiring Kit

(28)

$214.99

Related Searches


G112PS_GTA-602 small

Item added to your cart.

Price: $255.58

Essential add-ons
NVX SDTK20

Trunk Kit - 20 Square Feet of Sound Dampening Material (Five 18" x 32" Pieces)

$89.99

$59.99

Add to cart
Dynamat Xtreme 20' Trunk Kit 19405

20 ft. Trunk Kit with (5) Dynamat Extreme 18" x 32" Pieces

$236.95

$149.95

Add to cart
Boom Mat Damping Material (050210)

20.8 sq.ft Damping Material - (10 pk - 12-1/2" x 24" x 2mm )

$145.81

$119.99

Add to cart
Save up to 10 different vehicles in your garage

Loading...
Identify your vehicle and submodel details
  • Owner’s manual
  • Vehicle’s insurance card
  • Vehicle registration
  • Vehicle produced after 2005: Inside driver’s side door
  • Vehicle produced before 2005: Rear passenger doorjamb, glove box, center console, or engine compartment
Car Info Side Door Icon
Vehicle Registration Icon
Vehicle Insurance Icon