General Features:
- 6-1/2" Kappa Series 2-Way Component System
- Power Handling:
- Peak: 540 watts per pair / 270 watts each
- RMS: 180 watts per pair / 90 watts each
- Recommended Minimum Power: 25-270 watts each
- Carbon Injected Glass Fiber cone material
- Plus One cone technology offers more cone area than other speakers in its class
- Rubber speaker surround
- 1" Soft Dome edge-driven Fabric tweeter construction
- Adjustable, 0 or +3dB push-button tweeter level attenuation control
- High temperature voice coil reduces distortion
- Vented magnet and motor assembly cool the voice coil
- Gold-plated, screw-type speaker terminals for a secure connection
- Injected Carbon Glass Matrix (iCGM) speaker frames
- High-quality external crossover filters
- Protective, soft, rubber-finish grilles
- Protective magnet boot cover
- 2 ohms impedance
- Frequency response: 45-35,000 Hz
- Top-mount depth: 2-1/8"
- Sensitivity: 93dB
- Authorized Internet Dealer
- 3-year Manufacturer's Warranty
Priced Per Pair
Infinity Kappa 62.11I
150W 6.5" 2-Way Kappa Series Coaxial Speakers w/ Edge Driven Textile Tweeters
Quantity: 1
General Features:
- 6-1/2" Kappa Series 2-Way Car Speakers
- Power Handling:
- Peak: 450 watts per pair / 225 watts each
- RMS: 150 watts per pair / 75 watts each
- Recommended Minimum Power: 25-225 watts each
- Carbon Injected Glass Fiber cone material
- Plus One cone technology offers more cone area than other speakers in its class
- Rubber speaker surround
- 1" Soft Dome edge-driven Fabric tweeter construction
- Adjustable, 0 or +3dB push-button tweeter level attenuation control
- UniPivot tweeter allows you to aim the tweeter at the listener for better imaging
- High temperature voice coil reduces distortion
- Vented magnet and motor assembly cool the voice coil
- Gold-plated, screw-type speaker terminals for a secure connection
- Injected Carbon Glass Matrix (iCGM) speaker frames
- High-quality passive crossover components
- Protective, soft, rubber-finish grilles
- Protective magnet boot cover
- 2 ohms impedance
- Frequency response: 45-25,000 Hz
- Top-mount depth: 2-1/8"
- Sensitivity: 95dB
- Authorized Internet Dealer
- 3-year Manufacturer's Warranty
Priced Per Pair
JL Audio Slash 300/4v3
300W RMS 4-Channel Slash v3 Series Class A/B Full-Range Amplifier
Quantity: 1
300/4v3 Specifications:
- Slash v3 Series 4-Channel A/B Full-Range Amplifier
- RMS Power Ratings Channel (11V-14.5V):
- 4 ohms: 75 watts x 4 chan.
- 3 ohms: 75 watts x 4 chan.
- 2 ohms: 75 watts x 4 chan.
- 1.5 ohms: 75 watts x 4 chan.
- Bridged RMS Power Rating (11V-14.5V):
- Bridged, 3 ohms: 150 watts x 2 chan.
- Bridged, 4 ohms: 150 watts x 2 chan.
- Bridged, 6 ohms: 150 watts x 2 chan.
- Bridged, 8 ohms: 150 watts x 2 chan.
- Absolute Symmetry™ Class A/B Circuit
- R.I.P.S. - Regulated, Intelligent Power Supply
- Pulse width modulation-regulated switching power supply
- Dual N-Channel MOSFET power supply
- H-Bridge amplifier topology
- Powder-coated cast alloy heat sinks
- LED power/thermal/low-impedance indicators
- Differential-balanced input type with RCA jack inputs
- Advanced Rollback Protection monitors the amp's thermal condition
- 4/3/2 Channel Operation
- Selectable 2Ch/4Ch Input Mode
- Speaker level inputs via RCA, JL Audio XD-CLRAIC2-SW required
- Input sensitivity:
- Low level: 200mV-2V
- High level: 800mV-8V
- State-variable, 12 dB/octave Butterworth or 24 dB/octave Linkwitz-Riley LPF or HPF
- Selectable frequency multiplier: x1/x10
- Variable crossover filter (x1): 50 - 500 Hz
- Variable crossover filter (x10): 500 - 5000 Hz
- Slew Rate: ± 25V/µs
- Signal to Noise Ration: >108.5 dB
- Frequency response: 5 - 30,000 Hz (+0, -1 dB)
- Total Harmonic Distortion: <0.03% @ 4Ω , 20 - 20 kHz
- Damping Factor: >200 @ 4Ω/50 Hz, >100 @ 2Ω/50 Hz
- Inline 40A x 1 ANL or MaxiFuse Recommended
- Dimensions: 13.4"L x 9.25"W x 2.36"H
- 4-8 AWG +/- & 8-18 AWG 12V Rem terminals
- 2 Year Manufacturer's Warranty
Check out the JL Audio Slash 300/4v3 Owner's Manual
NVX XKIT44
100% Copper, 4-Chan. True Spec 4 Gauge Amp Installation Kit w/RCA Interconnect & 60 ft Speaker Cable
Quantity: 1
Amplifier Kit Features:
- Complete 4 Gauge Amplifier Installation Kit
- Designed specifically for car audio systems up to 1000 watts RMS
- Premium power and ground wire provides optimal power transfer
- Made from silver-tinned 100% virgin copper for a pure uninterrupted transfer of power and signal
- Direct-connect engineering
- Fewer connections for less signal distortion
- ANL/mini ANL Fuse holder offers ideal protection for high powered systems
- Envy-Flex cable and wire
- Full spec cable is true to gauge
- Strand Count: 1862
- BC-5W2 Compliant
- Authorized Internet Dealer
- 1-year Manufacturer's warranty
Kit includes:
- 20 ft. (6.1 meters) Frosted Blue 4 gauge main power wire with seamless crimp ring terminal and 6 ft. expandable sleeving
- 3 ft. (.91 meters) Frosted Gray 4 gauge main ground wire with seamless crimp ring terminal
- One 16 ft. (5 meters) 4-channel twisted construction RCA interconnect Cable (NVX XIV45)
- 20 ft. (6.1 meters) Clear 18 gauge remote lead wire
- 60 ft. (18.29 meters) Frosted Black/Blue 16 gauge speaker wire
- One NVX XMANL04 ANL/Mini-ANL fuse holder with 100 amp Mini-ANL fuse
- One 1/2" black rubber firewall grommet
- Two black 4 gauge nickel-plated spade terminals
- Three blue 16 gauge spade lugs
- Four 16 gauge quick disconnects
- Two black 16 gauge spade terminal
- Two 18 gauge red butt connector
- Ten 6" black zip ties