• Includes Hideaway Tuner and Magnetic Antenna
• Pause, Rewind, and Replay Up To 60 Minutes of Live Radio
• iTunes tagging with iPod connected
• Alert Notification When Favorite Song, Team or Artist is Playing

• 2-Channel Premium Adjustable Line Output Converter
• 3:1 Step Down With Adjustable Output
• 300w Total Maximum Input (150w Per Channel)
• Super Low Distortion

• 4-Channel Premium Adjustable Line Output Converter
• 6:1 Step Down With Adjustable Output
• 600w Total Maximum Input (150w Per Channel)
• Super Low Distortion

• 2-Channel Speaker Level Inputs
• Adjustable xBOOST corrects for bass roll-off
• Handles up to 30V (225 watts RMS)
• Provides up to 9.5 Volts of output
• Auto turn-on via DC offset or Audio detection 
• Load selection switch (20, 60, or 20K ohms)
• Wired remote bass level control included
• LED Clip indicator

• Two Channels of Active Speaker Level Inputs
• AccuBASS Processing
• 9.5 Volt Pre-Amp Outs
• GTO - Signal Sensing Inputs

• 2-Channel Speaker Level Inputs
• 4-Channel RCA Outputs
• Handles up to 40V (400 watts RMS)
• Provides up to 9.5 Volts of output
• Auto turn-on via DC offset or Audio detection 
• Load selection switch (20, 60, or 20K ohms)
• LED Clip indicator

• 3:1 Step Down With Adjustable Output
• DC Amplifier Turn On Trigger
• 160w Maximum Input Total (40w Per Channel)

• Adjustable Line Output Converter
• Utilize Audio Transformer for Noise Isolation
• Compatible with 2 - 40 watts RMS of Radio Output

• 2-Channel Fixed Line Level Converter
• Designed for Adding Aftermarket Amplifiers to a Factory OEM System
• Standard EIA Color Coded Wires
• 30 Watts Maximum Input
• Gold-Plated RCA Connectors

• 2-Channel Speaker Level Inputs
• 2-Channel RCA Outputs
• Handles up to 40V (400 watts RMS)
• Provides up to 9.5 Volts of output
• Auto turn-on via DC offset or Audio detection 
• Load selection switch (20, 60, or 20K ohms)
• LED Clip indicator

• 4-Channel Speaker Level Inputs
• 4-Channel RCA Outputs
• Handles up to 40V (400 watts RMS)
• Provides up to 9.5 Volts of output
• Auto turn-on via DC offset or Audio detection 
• Load selection switch (20, 60, or 20K ohms)
• Wired remote bass level control included
• LED Clip indicator

• 6:1 Step Down With Adjustable Output
• DC Amplifier Turn On Trigger
• 80w Maximum Input total (40w per channel)

• 2-Channel LOC PRO Series
• Remote Turn on Wire
• Single Dial
• Signal-Sensing Circuit
• Surface Mount Construction
• Level Gain Adjustment

• Fixed level
• 2-channel input
• 30-watts maximum input

• Interface For Smart Radios
• 25-ohm Load
• 4-Ch 20V Inputs

• Signal sensing turn-on circuit allows for easy addition of aftermarket amps to factory stereos
• 10 volt RCA pre-amp output
• Surface Mount Technology
• Ultra low 50m ohm output and 20 ohm input impedance helps eliminate noise

• Converts 10 to 30 watts per channel with a fixed 10:1 conversion
• Great for getting an additional set of pre-amps outputs from a head unit equipped with only one set

• 6-Channel Speaker Level Inputs
• 6-Channel RCA Outputs
• Handles up to 40V (400 watts RMS)
• Provides up to 9.5 Volts of output
• Auto turn-on via DC offset or Audio detection 
• Load selection switch (20, 60, or 20K ohms)
• Wired remote bass level control included
• LED Clip indicator

• Six Channel Line Output Converter with AccuBASS
• Six Channels Of Active Speaker Level Inputs – Accepts Up To 400 Watts Per Channel
• AccuBASS Circuitry
• GTO Circuit – Powers Up The Lc7i When It Detects Signal On The Speaker Level Input

• 4-Channel High-to-Low Level Converter
• High-to-Low Signal Converter to Connect 4-Channel Amplifiers to Radios Without RCA Output
• Output Voltage: Up to 3V (low-level)
• Mounting: Behind Dash