Factory OEM Radio Add-ons for 1966 Cadillac Eldorado

---

• Adjustable 2-channel line out converter
• Separate level adjustment for each channel
• 400 watt maximum output
• AccuBASS circuitry restores bass signal

• 2-Channel LOC PRO Series
• Remote Turn on Wire
• Single Dial
• Signal-Sensing Circuit
• Surface Mount Construction
• Level Gain Adjustment

• 2-Channel Premium Adjustable Line Output Converter
• 3:1 Step Down With Adjustable Output
• 300w Total Maximum Input (150w Per Channel)
• Super Low Distortion

• 4-Channel Premium Adjustable Line Output Converter
• 6:1 Step Down With Adjustable Output
• 600w Total Maximum Input (150w Per Channel)
• Super Low Distortion

• 2-channel line out converter
• Speaker Level Input Accepts Up To 400 Watts RMS
• Bass Enhancer And Bass Compensation
• xBOOST Technology
• Selectable Auto On
• 9.5 Volt Pre-Out
• 12 Volt Trigger Out

• 3:1 Step Down With Adjustable Output
• DC Amplifier Turn On Trigger
• 160w Maximum Input Total (40w Per Channel)

• 2-Channel Speaker Level Inputs
• Adjustable xBOOST corrects for bass roll-off
• Handles up to 30V (225 watts RMS)
• Provides up to 9.5 Volts of output
• Auto turn-on via DC offset or Audio detection 
• Load selection switch (20, 60, or 20K ohms)
• Wired remote bass level control included
• LED Clip indicator

• Fully Active, Speaker Level to Line Output Converter with Auto Turn On
•Fully-Regulated Switching MOSFET Power Supply
• Differential-balanced Input Architecture
• 40V RMS Per Channel
•DC-Offset Sensing or Signal Sensing Automatic Turn-On
• Ultra Compact Chassis Design
•Onboard LED Clipping Indicator

• 6-Channel Speaker Level Inputs
• 6-Channel RCA Outputs
• Handles up to 40V (400 watts RMS)
• Provides up to 9.5 Volts of output
• Auto turn-on via DC offset or Audio detection 
• Load selection switch (20, 60, or 20K ohms)
• Wired remote bass level control included
• LED Clip indicator

• 8-Channel Speaker Level Inputs
• 8-Channel RCA Outputs
• Handles up to 40V (400 watts RMS)
• Provides up to 9.5 Volts of output
• Auto turn-on via DC offset or Audio detection 
• Load selection switch (20, 60, or 20K ohms)
• Wired remote bass level control included
• LED Clip indicator

• Intelligent built-in LMC (Load Matching Circuit)
• Four channels of active speaker-level inputs
• Maximum Speaker Level Input: 40 Vrms
• Maximum Output Level: 9.5Vrms/13V peak
• 12VDC Remote Out (always active when unit is on)
• Compact design
• Dimensions: 7"W x 1"D x 1.14"H

• 2-Channel Speaker Level Inputs
• 2-Channel RCA Outputs
• Handles up to 40V (400 watts RMS)
• Provides up to 9.5 Volts of output
• Auto turn-on via DC offset or Audio detection 
• Load selection switch (20, 60, or 20K ohms)
• LED Clip indicator

• Adjustable Line Output Converter
• Utilize Audio Transformer for Noise Isolation
• Compatible with 2 - 40 watts RMS of Radio Output

• 2-ch speaker-to-RCA converter, LOC
• Compatible with OEM radios that have short circuit protection
• Take as much as 55 watts of input and deliver up to 8 volts of output

• Eight Speaker Level Inputs – Can Accept 400 Watt Signals!
• RCA Auxiliary Input for external device integration
• GTO™ Signal-Sensing Input
• Internal Channel Summing
• Line Output Converter

• Six Speaker Level Inputs – Can Accept 400 Watt Signals!
• GTO™ Signal-Sensing Input
• Internal Channel Summing
• Line Output Converter

• 4-channel Load Sensing Adaptor
• Fixes a common problem with connecting the FiX-82 to a factory amplifier
• Provides a lower impedance so the factory amplifier's load sensing circuit will allow the FiX-82 to work with it

• 6:1 Step Down With Adjustable Output
• DC Amplifier Turn On Trigger
• 80w Maximum Input total (40w per channel)

&bull 4-Channel LOC PRO Series
• Remote Turn on Wire
• Single Dial
• Signal-Sensing Circuit
• Surface Mount Construction
• Level Gain Adjustment

• Line out converter for adding amplifier to factory radio
• Auto remote turn on
• 6:1 step down with adjustable output
• 100 Watts Max
• 50 Watts max per channel