Universal-Fit Audio for 2000 Chrysler Concorde

---

• 1-Channel RCA Compact Noise Filter
• Number of channels: 1-Mono
• Input type: Female RCA
• Output type: Male RCA

• Full Frame License Plate Frame Camera Bracket
• Works exclusively with CAM-300 and CAM-400
• High shine chrome metal finish
• Hidden wiring for easy installation

• 200 Amp V12 Series 24K Gold-Plated Circuit Breaker
• Manual Reset Button
• 1/0 or 4 Gauge In/Out
• Water Resistant Housing
• 24K Gold-plated

• 3/4 inch
• refill package
• heat shrink < /br>

• RMS Power: 500 watts
• Impedance: Single 4 ohm
• Mineral-Filled Polypropylene Cone
• Nitrile Butadiene Rubber NBR Surround
• Mount depth: 5.93"
• Sensitivity: 84.87 dB

• Media Master Remote controller cable
• 6-foot Extension Cable

• Peak Power: 2000 watts
• RMS Power: 1000 watts
• Impedance: Dual 2 ohm
• Carbon Fiber Enhanced Non-Pressed Paper Cone
• Custom High Roll Foam Surround with black nylon stitching
• Mount depth: 6.30"
• Sensitivity: 82 dB (1W/1m)

• For OEM* & Aftermarket screens
• Turn signal camera activation timed to 12 seconds or continuous activation
• Selectable Rear View Camera Priority
• Selectable Turn Signal Cameras have priority over the rear

• Direct wire power cord
• Designed for laser and Radar detectors
• Prevents interference with driving functions
• Compatible with Passport 8500, 9500iX, Solo S3 and S4 Models
• Installs in vehicle fuse panel

• RMS Power: 500 watts
• Impedance: Single 4 ohm
• Mineral-Filled Polypropylene Cone
• Nitrile Butadiene Rubber NBR Surround
• Mount depth: 6.65"
• Sensitivity: 87.15 dB

• Black momentary switch with harness
• Rated at 5 amps
• IP67 waterproof rating
• 16mm (5/8") mounting hole size
• Red LED illuminated ring

• 4-Channel SwitchHub Solid-State Relay
• Single 40-amp output and triple 20-amp outputs
• 100-amp combined continuous capacity
• Outputs can be triggered independently

• 1/0-gauge copper ring terminals
• Package includes 10 ring terminals
• Designed with closed end pads
• Impenetrable shield against moisture

• 100 Amp Circuit Breaker
• Dust and splash proof
• Type III circuit breaker
• Easily mount on firewall or other panels
• Use as an alternative to fuse holders and fuses

• 300 watts x 1 channel @ 4 ohm
• 500 watts x 1 channel @ 2 ohm
• Total RMS Power: 500 watts
• Class D 2 ohm Stable Monoblock Amplifier

• 100 watts x 4 channel + 300 watts x 1 channel @ 4 ohm
• 200 watts x 4 channel + 500 watts x 1 channel @ 2 ohm
• Bridged: 400 watts x 2 channel @ 4 ohm + 500 watts x 1 channel @ 2 ohm
• Total RMS Power: 1300 watts
• Class D 2 ohm Stable 5-Channel Amplifier

• 40 watts x 4 channel @ 4 ohm
• 50 watts x 4 channel @ 2 ohm
• Bridged: 100 watts x 4 channel @ 4 ohm
• Total RMS Power: 200 watts
• Class D 2 ohm Stable 4-Channel Amplifier

• 3.5 mm to 3.5 mm Headphone Audio Splitter
• Allows for two people to listen to one audio source at once
• Length: 4.56" / 0.38 ft

• Bulk Pack of T-Tap Connector
• For 12/10 Gauge (AWG) Wire
• Yellow
• Package of 50

• Peak Power: 2400 watts
• RMS Power: 800 watts
• Impedance: Dual 2 or 4 ohm
• Composite Paper Concave Cone
• Nitrile Butadiene Rubber NBR Surround
• Mount depth: 6.75"
• Sensitivity: 87.6 dB

• Multi-Band Radar and Laser Detection
• Graphic Color OLED display with current speed, vehicle voltage, and alert area monitors
• User, pilot, arrow and meter modes
• Directional arrows provide true 360-degree awareness
• Installs on the windshield

• Peak Power: 1200 watts
• RMS Power: 600 watts
• Impedance: Dual 4 ohm
• Enhanced Pressed Paper Cone
• High Roll Foam Surround
• Mount depth: 5.80"
• Sensitivity: 85 dB

•10" Speaker Ring
• Made from 3/4" MDF
• Perfect for Custom Fiberglass Enclosures

• Transceiver Antenna
• Cable Included

• Peak Power: 8000 watts
• RMS Power: 4000 watts
• Impedance: Dual 2 ohm
• Polypropylene Cone
• High Roll Foam Surround
• Mount depth: 24.00"
• Sensitivity: 92 dB

• HPM Series 1/0 or 4ga Outputs with Digital Volt Meter
• Two (2) 1/0 Gauge or (2) 4 Gauge Output
• Monitor system voltage
• Ultimate power connection
• Multiple output design
• Positive terminals only

• RMS Power: 1500 - 3000 watts
• Impedance: Dual 1 ohm
• Double-pressed pulp Cone
• Nitrile Butadiene Rubber NBR Surround
• Mount depth: 10-1/8"

• 400 Watts RMS x 1 @ 4 ohm
• 800 Watts RMS x 1 @ 2 ohm
• 1200 Watts RMS x 1 @ 1 ohm
• CEA-2006 Compliant
• R.L.C. Remote Level Control
• Includes Amplifier Wiring Kit

• PRO Series Power Distribution T-Block
• Three 1/0 Gauge Inputs/Outputs
• Daisy Chain Design
• Deep Wire Recesses
• Oversized Set Screws
• Corrosion Resistant ShocKrome-Plated
• Protective Cover Included

• 50 watts x 4 channel @ 4 ohm
• 45 watts x 4 channel @ 2 ohm
• Total RMS Power: 200 watts
• Class D 2 ohm Stable 4-Channel Amplifier

• 12-volt to 6-volt step down converter
• Provides proper voltage for a 6V factory backup
• Includes a wiring harness with three wires

• Peak Power: 2000 watts
• RMS Power: 1000 watts
• Impedance: Dual 4 ohm
• Competition Grade Paper Cone
• Treated Foam Surround
• Mount depth: 6"
• Sensitivity: 81.6 dB

• Active line output converter
• All-analog circuit design
• Adaptable to most OEM amplifier outputs
• Input load switching
• Automatic turn-on function

• Universal 22" Double Row LED Light Bar
• Water-resistant IPX-67 Rating
• Flood/Spot Combo Beam Pattern
• Integrated epoxy-encapsulated electronics
• Includes brackets and mounting hardware

• 1-Way Remote Car Starter
• Includes (2) 1-way LED transmitters
• 1/4 mile (1320 feet) range
• Internal antenna
• Active transmit LED
• Command buttons

• Wired Bass Remote Controller
• Compatible with AudioControl Epicenter Micro and AudioControl EPICENTER MICRO PRO
• Dash-mountable or center-console installation
• Color: Black

• 2-Way 5-Button Replacement LCD Remote
• Up to 3000 feet of range (0.56 miles)
• Replacement remote for SP-302

• 75 watts x 4 channel @ 4 ohm
• 125 watts x 4 channel @ 2 ohm
• Bridged: 250 watts x 2 channel @ 4 ohm
• Total RMS Power: 500 watts
• Class D 2 ohm Stable 4-Channel Amplifier

• 600 watts x 1 channel @ 4 ohm
• 800 watts x 1 channel @ 3 ohm
• 1000 watts x 1 channel @ 2 ohm
• Total RMS Power: 1000 watts
• Class D 2 ohm Stable Monoblock Amplifier

• See-through windows allow for easy inspection
• High-temperature, impact-resistant plastic casings
• Ultimate circuit protection
• High conductivity plating
• Maximum current transfer

• 20 ft. 18 Gauge 9 Conductor Speed Speaker Wire
• Great for a 4-channel amplifier setup
• EIA standard easy color-coded copper wires
• Easy and fast installations
• Color: Blue

• Extremely durable fabric that will stand up to heavy usage
• Adhesive backing allows for an easier installation process
• Easy to cut, fit, and mold to desired shape or size
• Stain resistant
• Color: Black
• Carpet Thickness: 1/8 inch

• 250 watts x 1 channel @ 4 ohm
• 350 watts x 1 channel @ 2 ohm
• 600 watts x 1 channel @ 1 ohm
• Total RMS Power: 600 watts
• Class D 1 ohm Stable Monoblock Amplifier

• Bulk Pack of T-Tap Connector
• Allows for fast and easy splicing of wires
• Quickly tap into wires and cables
• Designed for tapping into 22/18 Gauge (AWG) wire
• Color: Red

• Bullet Super Tweeters
• 100 watts RMS Each
• 4 ohm Impedance

• Talk-back microphone with adjustable microphone gain
• Made for use in the outdoors, marine, and powersports use
• Equipped with RCA input and line out connections
• Can be used with Wet Sounds microphones
• Mounting hardware accessories included

• 50 watts x 8 channel + 80 watts x 4 channel @ 4 ohm
• Total RMS Power: 720 watts
• Class D 4 ohm Stable 12-Channel Digital Sound Processor Amplifier
• High-resolution (Hi-Res) audio playback
• Selectable pre-configured sound system configurations
• Embedded RTA signals for customized sound tuning
• Bluetooth audio streaming with included external module

• 1/0 AQWG Fuse Holder
• Lok-Nut style fasteners
• Water resistant

• Peak Power: 4000 watts
• RMS Power: 2000 watts
• Impedance: Dual 1 ohm
• Enhanced Woven Fiber Paper Composite Cone
• Custom High Roll Foam Surround
• 30 mm Xmax (One Way)
• Sensitivity: 87.3 dB

• Pack of 2 300-amp ANL Fuses
• Power Rating: 300A
• See-through windows
• High-temperature plastic casings
• Circuit protection and high conductivity
• Silver-plated connector blades

• 6-Spot Universal Lug-Style Ring Battery Terminals
• Designed for large-gauge power and ground connections
• Aluminum-plated build that resists corrosion
• Compatible with car, motorcycle and powersports applications
• Sold as pair

• 500 watts x 1 channel @ 4 ohm
• 750 watts x 1 channel @ 2 ohm
• 750 watts x 1 channel @ 1 ohm
• Total RMS Power: 750 watts
• Class BD 1 ohm Stable Monoblock Amplifier

• Peak Power: 600 watts
• Built-in D amplifier
• Weatherproof IPX-5 Rating
• (2) 8" 2-way Coaxial speakers
• (2) 1" Balanced Dome Titanium Tweeters
• AUX input for smartphones and MP3

• 900 watts x 1 channel @ 4 ohm
• 1800 watts x 1 channel @ 2 ohm
• 1800 watts x 1 channel @ 1 ohm
• Total RMS Power: 1800 watts
• Class D 1 ohm Stable Monoblock Amplifier

•Digital Optical Audio Connection Cable
• Digital Optical Audio Connection Cable
• Built-in Toslink Connectors
• Length: 3 feet

• RMS Power: 250 watts
• Impedance: Single 4 ohm
• Mineral-Filled Polypropylene Cone
• Nitrile Butadiene Rubber NBR Surround
• Mount depth: 4.63"
• Sensitivity: 83.24 dB

• Shielded noise-rejecting Twisted-pair construction
• Heavy gauge OFC conductors ensure superior sound quality
• Split-tip Silver-Plated ends offer best in class signal transfer
• Molded ends equipped with colored channel identifiers