A subwoofer that works with, or is designed for, your 2007 GMC Sierra 3500 will add bass, clarity and depth to your music and system. A quality subwoofer will give realism and an overall rich, complete sound that you otherwise would not get with a factory car sound system.
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
Many brands group their products into series or lines of products to help customers know the level of quality (good, better, best for example). You can filter by series and the brand using our guided browsing.
This means that the subwoofer/speaker is designed to be installed in areas that do not have a lot of space. Shallow mount subwoofers are typically found under a seat or behind the seat in some trucks.
Shallow mount speakers will typically have a mounting depth of 2" or less, while shallow mount subwoofers will typically have a mounting depth of 3" or less.
Dual voice coil subs have more wiring flexibility than single voice coils subs; however, single voice coil subwoofers provide easier hookup options for wiring multiple subwoofers in parallel or series. You may also run a dual voice coil (DVC) sub in parallel, series, or combination. A quad voice coil has four voice coils and is equal to two dual voice coil subwoofers as far as wiring goes.
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
This is the design of the subwoofer or the opening of the subwoofer enclosure. Each design has it's own benefits, whether it is a square, circle, or oval.
Round/Circle: This is the typical and common subwoofer design. They have a round cone and are a circle in design.
Square: These woofers are able to achieve a greater cone area in a smaller space. Because of the greater surface area, some square subwoofers will be louder than a round subwoofer of the same size.
This value indicates the minimum sealed box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
This value indicates the maximum sealed box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
This is the recommended type of enclosure that the subwoofer should be installed into. Some subwoofers are specially designed for particular enclosures.
Sealed: These enclosures completely enclose the air inside the box. These boxes produce a tight bass.
Ported/Vented: These enclosures have a slot of air to escape from the box. The result is a sound that has more "boom".
Bandpass: These are a combination of both sealed and ported enclosures. They can be very efficient, but require tuning for the best response.
Typically measured in millimeters, the Xmax value is the measure of a speaker cone's maximum excursion in one direction while maintaining a linear behavior.
Dual 10" Subwoofer Enclosure for 2007-2013 Chevy Silverado and GMC Sierra Extended Cab Trucks
• 10" Dual Medium Subwoofer Enclosure for Select GM Trucks • Designed Specifically For Chevrolet Silverado and GM Sierra Trucks • With New Body Style 2007-2013 • Coated Tough Guard Finish • CNC Grooved Custom Finish • Rounded Edges
• 10" Dual Medium Subwoofer Enclosure for Select GM Trucks • Designed Specifically For Chevrolet Silverado and GM Sierra Trucks • With New Body Style 2007-2013 • Coated Tough Guard Finish • CNC Grooved Custom Finish • Rounded Edges
Single 10" Vented Subwoofer Enclosure for 14-18 Chevy Silverado and GMC Sierra Extended Cab Trucks
• Single 10" Down Firing Vented Subwoofer Enclosure • Designed Specifically For 14-Up Chevy Silverado and GMC Sierra Extended Cab Trucks • Premium Carpeted Finish • Glued & Braced MDF Construction • Rounded Edges
• Single 10" Down Firing Vented Subwoofer Enclosure • Designed Specifically For 14-Up Chevy Silverado and GMC Sierra Extended Cab Trucks • Premium Carpeted Finish • Glued & Braced MDF Construction • Rounded Edges
Single 10" Subwoofer Enclosure for 1999-2007 Chevy/GMC Trucks
• Single 10" Down Firing Subwoofer Enclosure • Designed Specifically for 1999-2007 Chevy Silverado and GMC Sierra Extended Cab Trucks • Premium Carpeted Finish • Glued & Braced MDF Construction • Rounded Edges
• Single 10" Down Firing Subwoofer Enclosure • Designed Specifically for 1999-2007 Chevy Silverado and GMC Sierra Extended Cab Trucks • Premium Carpeted Finish • Glued & Braced MDF Construction • Rounded Edges
250W RMS 10" Amplified Vehicle Specific Custom Subwoofer Enclosure for select 2007-2016 vehicles from GMC, Chevrolet
• 10" Amplified Loaded Subwoofer System
• Compatible with select 2007-2016 vehicles from GMC, Chevrolet Vehicles
• 250 Watt RMS
• Built-In Class D Amplifier
• 10" Amplified Loaded Subwoofer System
• Compatible with select 2007-2016 vehicles from GMC, Chevrolet Vehicles
• 250 Watt RMS
• Built-In Class D Amplifier
Custom fit subwoofer enclosure for select 2007-2013 vehicles from GMC, Chevrolet (Ebony)
• Loaded Vehicle Specific Stealthbox Subwoofer Enclosure with Single JL Audio 10W1v3-4 • 600 Watts RMS • For 2007-2013 Chevrolet Silverado / GMC Sierra Extended Cab Trucks with Ebony interior • Stealthbox Installs easily below the rear driver-side seat
• Loaded Vehicle Specific Stealthbox Subwoofer Enclosure with Single JL Audio 10W1v3-4 • 600 Watts RMS • For 2007-2013 Chevrolet Silverado / GMC Sierra Extended Cab Trucks with Ebony interior • Stealthbox Installs easily below the rear driver-side seat
Dual 10" Subwoofer Enclosure for 00-06 Chevy Silverado and GMC Sierra HD Crew Cab Trucks
• Dual 10" Down Firing Subwoofer Enclosure • Designed Specifically For 2000-06 Chevy Silverado and GMC Sierra HD Crew Cab Trucks • Premium Carpeted Finish • Glued & Braced MDF Construction • Rounded Edges
• Dual 10" Down Firing Subwoofer Enclosure • Designed Specifically For 2000-06 Chevy Silverado and GMC Sierra HD Crew Cab Trucks • Premium Carpeted Finish • Glued & Braced MDF Construction • Rounded Edges
Single 12" Subwoofer Enclosure for 1999-2007 Chevy/GMC Trucks
• Single 12" Down Firing Subwoofer Enclosure • Designed Specifically For 1999-2007 Chevy Silverado and GMC Sierra Extended Cab Trucks • Premium Carpeted Finish • Glued & Braced MDF Construction • Rounded Edges
• Single 12" Down Firing Subwoofer Enclosure • Designed Specifically For 1999-2007 Chevy Silverado and GMC Sierra Extended Cab Trucks • Premium Carpeted Finish • Glued & Braced MDF Construction • Rounded Edges
1000W Terminator Series Ported Dual 12" Subwoofer Enclosure
• 1000W Dual 12" Vented Subwoofer Enclosure
• 12" Subwoofer
• 5/8" MDF Enclosure with Black Carpet Finish
• Enclosure Dimensions: 11" TD x 13.5" BD x 29.5" W x 14" H
• 1000W Dual 12" Vented Subwoofer Enclosure
• 12" Subwoofer
• 5/8" MDF Enclosure with Black Carpet Finish
• Enclosure Dimensions: 11" TD x 13.5" BD x 29.5" W x 14" H
• RMS Power: 1500 Watts
• 3” 4-Layer High Temperature Black Aluminum Voice coil
• Carbon Fiber Enhanced Non-Pressed Paper Cone
• Custom High Roll foam surround with black nylon stitching
• 202 oz. Triple stacked High Energy ferrite magnet
• Die Cast aluminum vented basket
• RMS Power: 1500 Watts
• 3” 4-Layer High Temperature Black Aluminum Voice coil
• Carbon Fiber Enhanced Non-Pressed Paper Cone
• Custom High Roll foam surround with black nylon stitching
• 202 oz. Triple stacked High Energy ferrite magnet
• Die Cast aluminum vented basket
3.70 Total Cu Ft - Dual 12" 3/4" MDF Ported Subwoofer Box Enclosure with Custom Black Baffle
• 12" Dual Ported Subwoofer Enclosure • 3/4" Medium Density Fiberboard Construction • Satin Black Panel • Durable Black Carpet • Pre-Lined with Poly-Fil • Gold Speaker Terminals • Total box volume: 3.7 cubic feet
• 12" Dual Ported Subwoofer Enclosure • 3/4" Medium Density Fiberboard Construction • Satin Black Panel • Durable Black Carpet • Pre-Lined with Poly-Fil • Gold Speaker Terminals • Total box volume: 3.7 cubic feet
• 12" Solo-Baric Subwoofer in Thin Profile Enclosure
• RMS: 600W / Peak: 1200W
• Square Sub Design Moves 20% More Air Than Round Subwoofers
• Easily Mounts Under or Behind a Seat
• Advanced internal bracing
• Ribbed Santoprene Surround Resists Heat And Degrading
• 12" Solo-Baric Subwoofer in Thin Profile Enclosure
• RMS: 600W / Peak: 1200W
• Square Sub Design Moves 20% More Air Than Round Subwoofers
• Easily Mounts Under or Behind a Seat
• Advanced internal bracing
• Ribbed Santoprene Surround Resists Heat And Degrading
• RMS Power: 650 Watts
• 2.5” 4-Layer High Temperature Black Aluminum Voice coil
• Carbon Fiber Enhanced Non-Pressed Paper Cone
• Custom High Roll foam surround with black nylon stitching
• 124 oz. Triple stacked High Energy ferrite magnet
• Die Cast aluminum vented basket
• RMS Power: 650 Watts
• 2.5” 4-Layer High Temperature Black Aluminum Voice coil
• Carbon Fiber Enhanced Non-Pressed Paper Cone
• Custom High Roll foam surround with black nylon stitching
• 124 oz. Triple stacked High Energy ferrite magnet
• Die Cast aluminum vented basket
• Sealed downward-firing enclosure with one CompRT 12" subwoofer and passive radiator
• 3/4" medium-density fiberboard construction covered with carpet
• 2-ohm total impedance
• Power Handling: 500 watts RMS (1000 watts peak power)
• Sensitivity: 98 dB
• Frequency Response: 25-500 Hz
• Dimensions: 27-1/2"W x 14-5/8"D x 6-1/8"H
• Sealed downward-firing enclosure with one CompRT 12" subwoofer and passive radiator
• 3/4" medium-density fiberboard construction covered with carpet
• 2-ohm total impedance
• Power Handling: 500 watts RMS (1000 watts peak power)
• Sensitivity: 98 dB
• Frequency Response: 25-500 Hz
• Dimensions: 27-1/2"W x 14-5/8"D x 6-1/8"H
• RMS Power: 1200 Watts
• 3” 4-Layer High Temperature Black Aluminum Voice coil
• Carbon Fiber Enhanced Non-Pressed Paper Cone
• Custom High Roll foam surround with black nylon stitching
• 202 oz. Triple stacked High Energy ferrite magnet
• Die Cast aluminum vented basket
Single 15" Ported 3/4" (3 cubic ft) Tru Spec Series Subwoofer Enclosure (Made in the USA)
• 15" Single Vented / Ported Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Total box volume: 3 cubic feet
• Single double flush baffle
• Port Area: 44"
• Flush Trim Diameter: 15.75"
• 15" Single Vented / Ported Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Total box volume: 3 cubic feet
• Single double flush baffle
• Port Area: 44"
• Flush Trim Diameter: 15.75"
• RMS Power: 650 Watts
• 2.5” 4-Layer High Temperature Black Aluminum Voice coil
• Carbon Fiber Enhanced Non-Pressed Paper Cone
• Custom High Roll foam surround with black nylon stitching
• 124 oz. Triple stacked High Energy ferrite magnet
• Die Cast aluminum vented basket
• RMS Power: 650 Watts
• 2.5” 4-Layer High Temperature Black Aluminum Voice coil
• Carbon Fiber Enhanced Non-Pressed Paper Cone
• Custom High Roll foam surround with black nylon stitching
• 124 oz. Triple stacked High Energy ferrite magnet
• Die Cast aluminum vented basket