Factory OEM Radio Add-ons for 2007 Honda S2000

---

• 2-Channel Speaker Level Inputs
• Adjustable xBOOST corrects for bass roll-off
• Handles up to 30V (225 watts RMS)
• Provides up to 9.5 Volts of output
• Auto turn-on via DC offset or Audio detection 
• Load selection switch (20, 60, or 20K ohm)
• Wired remote bass level control included
• LED Clip indicator

• Adjustable 2-channel line out converter
• Separate level adjustment for each channel
• 400 watt maximum output
• AccuBASS circuitry restores bass signal

• Fully Active, Speaker Level to Line Output Converter with Auto Turn On
•Fully-Regulated Switching MOSFET Power Supply
• Differential-balanced Input Architecture
• 40V RMS Per Channel
•DC-Offset Sensing or Signal Sensing Automatic Turn-On
• Ultra Compact Chassis Design
•Onboard LED Clipping Indicator

• 2-ch speaker-to-RCA converter, LOC
• Compatible with OEM radios that have short circuit protection
• Take as much as 55 watts of input and deliver up to 8 volts of output

• 2-Channel LOC PRO Series
• Remote Turn on Wire
• Single Dial
• Signal-Sensing Circuit
• Surface Mount Construction
• Level Gain Adjustment

• 2-channel line out converter
• Speaker Level Input Accepts Up To 400 Watts RMS
• Bass Enhancer And Bass Compensation
• xBOOST Technology
• Selectable Auto On
• 9.5 Volt Pre-Out
• 12 Volt Trigger Out

• 2-Channel line output converter with amplifier turn-on
• Adjustable gain for each channel
• Small and compact in size
• Detects presence of audio signal

• 4-channel Load Sensing Adaptor
• Fixes a common problem with connecting the FiX-82 to a factory amplifier
• Provides a lower impedance so the factory amplifier's load sensing circuit will allow the FiX-82 to work with it

• Converts 10 to 30 watts per channel with a fixed 10:1 conversion
• Great for getting an additional set of pre-amps outputs from a head unit equipped with only one set

• 2-Channel LOC PRO Series
• 33% Smaller Size Gives More Room For Vital Components
• 55 Watts Per Channel
• Speaker Level Input to RCA Level Output
• Single Dial

• 2-channel active line output converter
• 2 speaker-level inputs with up to 400 watts RMS power handling
• 2 preamp-level outputs (up to 10V)

• Adjustable 2-channel line out converter
• Separate level adjustment for each channel
• 400 watt maximum output
• GTO Signal Sense

• Two Channel Output Converter
• Gold Plated RCA Jacks
• Stinger Select Series

&bull 4-Channel LOC PRO Series
• Remote Turn on Wire
• Single Dial
• Signal-Sensing Circuit
• Surface Mount Construction
• Level Gain Adjustment

• 2-Channel lossless audio line output converter
• Lossless audio, double step down ratio
• Compact size with level matching controls (High/Low)
• Selectable auto turn-on remote out
• Features noise rejection and speaker emulator

• 2-Channel line output converter with speaker emulator<
• Remote output with signal sensing
• Features power LED indicator
• Small and compact design

• 4-Channel lossless audio line output converter
• Lossless audio, double step down ratio
• Compact size with level matching controls (High/Low)
• Selectable auto turn-on remote out
• Features noise rejection and speaker emulator

• Intelligent built-in LMC (Load Matching Circuit)
• Four channels of active speaker-level inputs
• Maximum Speaker Level Input: 40 Vrms
• Maximum Output Level: 9.5Vrms/13V peak
• 12VDC Remote Out (always active when unit is on)
• Compact design
• Dimensions: 7"W x 1"D x 1.14"H

• 4-Channel High-to-Low Level Converter
• High-to-Low Signal Converter to Connect 4-Channel Amplifiers to Radios Without RCA Output
• Output Voltage: Up to 3V (low-level)
• Mounting: Behind Dash

• Line out converter for adding amplifier to factory radio
• Auto remote turn on
• 6:1 step down with adjustable output
• 100 Watts Max
• 50 Watts max per channel