Universal-Fit Audio for 2011 Dodge Durango

---

• Transceiver Antenna
• Cable Included

• Peak Power: 8000 watts
• RMS Power: 4000 watts
• Impedance: Dual 2 ohm
• Polypropylene Cone
• High Roll Foam Surround
• Mount depth: 24.00"
• Sensitivity: 92 dB

• HPM Series 1/0 or 4ga Outputs with Digital Volt Meter
• Two (2) 1/0 Gauge or (2) 4 Gauge Output
• Monitor system voltage
• Ultimate power connection
• Multiple output design
• Positive terminals only

• RMS Power: 1500 - 3000 watts
• Impedance: Dual 1 ohm
• Double-pressed pulp Cone
• Nitrile Butadiene Rubber NBR Surround
• Mount depth: 10-1/8"

• 400 Watts RMS x 1 @ 4 ohm
• 800 Watts RMS x 1 @ 2 ohm
• 1200 Watts RMS x 1 @ 1 ohm
• CEA-2006 Compliant
• R.L.C. Remote Level Control
• Includes Amplifier Wiring Kit

• PRO Series Power Distribution T-Block
• Three 1/0 Gauge Inputs/Outputs
• Daisy Chain Design
• Deep Wire Recesses
• Oversized Set Screws
• Corrosion Resistant ShocKrome-Plated
• Protective Cover Included

• 50 watts x 4 channel @ 4 ohm
• 45 watts x 4 channel @ 2 ohm
• Total RMS Power: 200 watts
• Class D 2 ohm Stable 4-Channel Amplifier

• 12-volt to 6-volt step down converter
• Provides proper voltage for a 6V factory backup
• Includes a wiring harness with three wires

• Peak Power: 2000 watts
• RMS Power: 1000 watts
• Impedance: Dual 4 ohm
• Competition Grade Paper Cone
• Treated Foam Surround
• Mount depth: 6"
• Sensitivity: 81.6 dB

• Active line output converter
• All-analog circuit design
• Adaptable to most OEM amplifier outputs
• Input load switching
• Automatic turn-on function

• Universal 22" Double Row LED Light Bar
• Water-resistant IPX-67 Rating
• Flood/Spot Combo Beam Pattern
• Integrated epoxy-encapsulated electronics
• Includes brackets and mounting hardware

• 1-Way Remote Car Starter
• Includes (2) 1-way LED transmitters
• 1/4 mile (1320 feet) range
• Internal antenna
• Active transmit LED
• Command buttons

• Wired Bass Remote Controller
• Compatible with AudioControl Epicenter Micro and AudioControl EPICENTER MICRO PRO
• Dash-mountable or center-console installation
• Color: Black

• 2-Way 5-Button Replacement LCD Remote
• Up to 3000 feet of range (0.56 miles)
• Replacement remote for SP-302

• 75 watts x 4 channel @ 4 ohm
• 125 watts x 4 channel @ 2 ohm
• Bridged: 250 watts x 2 channel @ 4 ohm
• Total RMS Power: 500 watts
• Class D 2 ohm Stable 4-Channel Amplifier

• 600 watts x 1 channel @ 4 ohm
• 800 watts x 1 channel @ 3 ohm
• 1000 watts x 1 channel @ 2 ohm
• Total RMS Power: 1000 watts
• Class D 2 ohm Stable Monoblock Amplifier

• See-through windows allow for easy inspection
• High-temperature, impact-resistant plastic casings
• Ultimate circuit protection
• High conductivity plating
• Maximum current transfer

• 20 ft. 18 Gauge 9 Conductor Speed Speaker Wire
• Great for a 4-channel amplifier setup
• EIA standard easy color-coded copper wires
• Easy and fast installations
• Color: Blue

• Extremely durable fabric that will stand up to heavy usage
• Adhesive backing allows for an easier installation process
• Easy to cut, fit, and mold to desired shape or size
• Stain resistant
• Color: Black
• Carpet Thickness: 1/8 inch

• 250 watts x 1 channel @ 4 ohm
• 350 watts x 1 channel @ 2 ohm
• 600 watts x 1 channel @ 1 ohm
• Total RMS Power: 600 watts
• Class D 1 ohm Stable Monoblock Amplifier

• Bulk Pack of T-Tap Connector
• Allows for fast and easy splicing of wires
• Quickly tap into wires and cables
• Designed for tapping into 22/18 Gauge (AWG) wire
• Color: Red

• Bullet Super Tweeters
• 100 watts RMS Each
• 4 ohm Impedance

• Talk-back microphone with adjustable microphone gain
• Made for use in the outdoors, marine, and powersports use
• Equipped with RCA input and line out connections
• Can be used with Wet Sounds microphones
• Mounting hardware accessories included

• 50 watts x 8 channel + 80 watts x 4 channel @ 4 ohm
• Total RMS Power: 720 watts
• Class D 4 ohm Stable 12-Channel Digital Sound Processor Amplifier
• High-resolution (Hi-Res) audio playback
• Selectable pre-configured sound system configurations
• Embedded RTA signals for customized sound tuning
• Bluetooth audio streaming with included external module

• 1/0 AQWG Fuse Holder
• Lok-Nut style fasteners
• Water resistant

• Peak Power: 4000 watts
• RMS Power: 2000 watts
• Impedance: Dual 1 ohm
• Enhanced Woven Fiber Paper Composite Cone
• Custom High Roll Foam Surround
• 30 mm Xmax (One Way)
• Sensitivity: 87.3 dB

• Pack of 2 300-amp ANL Fuses
• Power Rating: 300A
• See-through windows
• High-temperature plastic casings
• Circuit protection and high conductivity
• Silver-plated connector blades

• 6-Spot Universal Lug-Style Ring Battery Terminals
• Designed for large-gauge power and ground connections
• Aluminum-plated build that resists corrosion
• Compatible with car, motorcycle and powersports applications
• Sold as pair

• 500 watts x 1 channel @ 4 ohm
• 750 watts x 1 channel @ 2 ohm
• 750 watts x 1 channel @ 1 ohm
• Total RMS Power: 750 watts
• Class BD 1 ohm Stable Monoblock Amplifier

• Peak Power: 600 watts
• Built-in D amplifier
• Weatherproof IPX-5 Rating
• (2) 8" 2-way Coaxial speakers
• (2) 1" Balanced Dome Titanium Tweeters
• AUX input for smartphones and MP3

• 900 watts x 1 channel @ 4 ohm
• 1800 watts x 1 channel @ 2 ohm
• 1800 watts x 1 channel @ 1 ohm
• Total RMS Power: 1800 watts
• Class D 1 ohm Stable Monoblock Amplifier

•Digital Optical Audio Connection Cable
• Digital Optical Audio Connection Cable
• Built-in Toslink Connectors
• Length: 3 feet

• RMS Power: 250 watts
• Impedance: Single 4 ohm
• Mineral-Filled Polypropylene Cone
• Nitrile Butadiene Rubber NBR Surround
• Mount depth: 4.63"
• Sensitivity: 83.24 dB

• Shielded noise-rejecting Twisted-pair construction
• Heavy gauge OFC conductors ensure superior sound quality
• Split-tip Silver-Plated ends offer best in class signal transfer
• Molded ends equipped with colored channel identifiers

• HPM Series Fused Power Distribution Block
• One 1/0 Gauge or 4 Gauge Input
• Two 4/8 Gauge Outputs
• Multiple Output Design
• Protective Cover Included
• Corrosion Resistant Satin Chrome Finish

• Remote Turn-On Module
• Used To Turn On Remote Amplifiers
• 2 Second Delay To Prevent Turn-On Noise
• Supplies 2 Amps Of Current
• Can Drive Multiple Amps Or A Power Antenna
• Activated By Low Level Trigger Lead

• Universal DIN 1/4" Border Trim
• Painted to match factory dash color
• High-Grade ABS plastic construction
• Factory style texture

• Powersports Bluetooth Audio Receiver and Controller
• Easily pairs with any Bluetooth audio device
• Compact IP66 water-resistant design
• Compatible with UTV dash double-switch knockouts
• Stereo RCA line-out, remote turn-on, and subwoofer-level adjustments

• I-BAR Side and Top Terminal Adapter Kit
• Mounts to Any i-BAR Compatible Battery
• Provides GM Style Threaded Side Post Terminals
• Brass Coated Battery Post Material

• 5 Farad Digital Capacitor
• Carbon Fiber Design
• 5000 Watt Systems
• Digital Display

• For Ultra-luxury high-end vehicles
• 12-24V universal usage
• Environmentally friendly and flame retardant materials
• Suitable for refit control of all equipment in the car
• Output short-circuit protection, overload protection
• Suitable for installation and use of all 12/24v battery vehicles

• Universal Underdash CD Housing
• Premium underdash housing fully encloses the unit
• Quick conversion from 2-Shaft to DIN
• High-grade ABS Plastic

• 11" Amplified Loaded Subwoofer System
• Built-In Class D Amplifier
• Variable Bass Boost
• Speaker-Level Inputs
• Wired Remote Bass Level Control

• 7.7" trim ring for sport grilles in M6 speakers
• M6 speakers sold separately
• Color: Satin Black

• 1/0-gauge to 8-gauge Single Distribution Block
• Accepts AFS and ANL fuses
• Linkable design allows for system flexibility and clean installations

• 4 AWG Power, Ground and Remote Quick Disconnect
• Rated up to 120 Amps
• Anderson connectors
• Makes it easy to remove amps, batteries and other equipment quickly
• Includes male and female quick disconnects

• 700 watts x 1 channel @ 4 ohm
• 1000 watts x 1 channel @ 2 ohm
• 1000 watts x 1 channel @ 1 ohm
• Total RMS Power: 1000 watts
• Class BD 1 ohm Stable Monoblock Amplifier

• R500X1D 500W RMS Prime Series Class D Monoblock Amplifier
• BAK42 Complete 4 Gauge Amplifier Wiring Kit with 2-Channel RCA Interconnects (CCA Wiring)

• Peak Power: 1000 watts
• RMS Power: 350 watts
• Impedance: Dual 2 ohm
• Kevlar Reinforced Pulp Paper Cone
• High-Amplitude Multi-Roll (HAMR) Surround
• Mount depth: 4.56"
• Sensitivity: 83.6 dB

• RMS Power: 1000 - 2000 watts
• Impedance: Dual 1 ohm
• Double-pressed pulp Cone
• UV-resistant Santoprene Surround
• Mount depth: 13-3/16"

• 1.8" NEO Series Pro-Audio Bullet Tweeters
• 100 watts Peak Each
• RMS Each
• 4 ohm Impedance

• 1" Pro-Audio Swivel Tweeters
• 100 watts Peak Each
• 50 watts RMS Each
• 4 ohm Impedance

• Retain Factory Steering Wheel Controls with Aftermarket Stereo
• Compatible with More than 1700 Vehicles
• Works with Most Aftermarket Stereo Brands
• Assign Each Control a Secondary Function
• Program it Yourself with a Windows Based Computer

• (2) 1/0 AWG - 10 AWG plus (2) 4 AWG - 10 AWG Out
• Compact design for simpler installation
• Solid brass construction for maximum conductivity
• Nickel finish for durability

• 12" Single Sealed Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Internal box volume: 1.00 cubic feet
• Premium Black Carpet with Black NVX Logo

• For use with aftermarket sound systems or accessories like wenches
• Industrial-strength quadruple fuse holder
• Stainless steel hardware
• Also works in marine applications

• Door Lock Pulse Generator DEI 452T
• A door lock pulse generator to convert a positive or negative latching input to door lock and unlock pulses

• Encore WK-4 Four Window Roll-up Kit
• Universal for vehicles with Alarm/Remote Start Systems
• Rolls up windows one at a time or all together when arming your vehicle's alarm or remote start
• Intelligent safety sensor
• Positive and Negative Triggers