Equalizers & Sound Processors

• 4-Channel Speaker Level Inputs
• 4-Channel RCA Outputs
• Handles up to 40V (400 watts RMS)
• Provides up to 9.5 Volts of output
• Auto turn-on via DC offset or Audio detection 
• Load selection switch (20, 60, or 20K ohms)
• Wired remote bass level control included
• LED Clip indicator

• Professional iOS Test and Measurement Microphone
• Analyze the frequency spectrum of any environment to improve the acoustics
• Perfect for optimizing speaker placement in home theatres, cars, living rooms, live venues, etc.
• Uses processing power of your Apple Device
• SPL Dynamic Range: 28 dBA to 120 dBA
• Frequency Response: 20 - 20,000 Hz ² 3.0dB

• OEM Integration Digital Signal Processor
• Automatic Time Correction
• Digital EQ
• 24-big DSP
• 2-channel Stereo RCA Output
• 1 Digital Optical (Toslink) Output

• 6:1 Step Down With Adjustable Output
• DC Amplifier Turn On Trigger
• 80w Maximum Input total (40w per channel)

• Plug and Play Design (No cutting or splicing)
• Provides 12-volt 500-mA remote wire
• Includes gain level controller to adjust the overall output
• Designed to provide 2-channels of low-level audio

• 2-Channel LOC PRO Series
• Remote Turn on Wire
• Single Dial
• Signal-Sensing Circuit
• Surface Mount Construction
• Level Gain Adjustment

• 128 bit per channel floating point DSP and 192 kHz 32 bit DAC
• 6 channel analog output (Front L/R, Rear L/R, Sub and Center)
• Onstar® Navigation prompts and Bluetooth eliminating the need for an external speaker
• 500mA output for controlling aftermarket devices
• Retains the factory 3 band equalizer (high, mid and bass)

• 7-Band Digital Equalizer
• 3 Sets of 8V Preamp Outputs
• Signal-to-Noise Ratio: 96dB

• 16-CH high-level inputs
• 31 Bands parametric EQ
• 16 analog Pre-Amp inputs (RCA)

• Fixed level
• 2-channel input
• 30-watts maximum input

• 6-Channel LOC Line Driver w/ 14 Band Equalizer
• Selectable Crossover Frequency: 50-500 Hz
• Frequency Response: 10-22,000Hz
• 24 dB/Octave Linkwitz-Riley Crossover

• 6-Channel Speaker Level Inputs
• 6-Channel RCA Outputs
• Handles up to 40V (400 watts RMS)
• Provides up to 9.5 Volts of output
• Auto turn-on via DC offset or Audio detection 
• Load selection switch (20, 60, or 20K ohms)
• Wired remote bass level control included
• LED Clip indicator

• Universal EQ Mounting Kit
• Durable black powder coated finish
• CNC Billet Aluminum construction
• Mounting hardware included

• Signal sensing turn-on circuit allows for easy addition of aftermarket amps to factory stereos
• 10 volt RCA pre-amp output
• Surface Mount Technology
• Ultra low 50m ohm output and 20 ohm input impedance helps eliminate noise

• Digital Sound Matrix Processor
• Allows users to truly optimize the performance of their audio system
• Line-level and Digital audio inputs
• 30 bands of equalization
• Dimensions: 9-1/2"W x 5-3/4"D x 1-5/8"H

• 2-Channel Preamp Inputs and Outputs
• Built-In Subsonic Filter
• Wired Dash Mount Remote Included
• Small Footprint

• Plug and Play Design (No cutting or splicing)
• Provides 12-volt 500-mA remote wire
• Includes gain level controller to adjust the overall output
• Designed to provide 2-channels of low-level audio

• Active Crossover with Remote Bass Control
• Infinite Asymetrical Electronic Crossover Design
• Quasi-Parametric EQ with 45Hz Bass Boost Circuitry
• 2nd Order Butterworth Hi-Pass Filter
• Chrome Case

• Converts 10 to 30 watts per channel with a fixed 10:1 conversion
• Great for getting an additional set of pre-amps outputs from a head unit equipped with only one set

• Graphic Stereo Equalization
• Para-BASS
• Input Selection
• 24dB/Octave Linkwitz Riley Crossover
• Pre-Amp Line Driver
• Master Volume Adjustment
• Subwoofer Level Control
• Fader Control
• Adjustable Illumination