MB QUART RS1-269 with Speaker Installation Kit
240W Peak (120W RMS) 6"x9" Reference Series 2-Way Component Speaker System
240W Peak (120W RMS) 6"x9" Reference Series 2-Way Component Speaker System
• 120 watts Peak Each, 60 watts RMS Each
• 3/4" Titanium Dome Tweeters
• Bamboo Fiber Cone cone material
• Impedance: 4 ohms
• Sensitivity: 88 dB
• 120 watts Peak Each, 60 watts RMS Each
• 3/4" Titanium Dome Tweeters
• Bamboo Fiber Cone cone material
• Impedance: 4 ohms
• Sensitivity: 88 dB
Boss CH6500 with Speaker Installation Kit
700W Peak 6.5" 2-Way Component Speaker System + + 6.5" Speaker Baffles, Sound Dampening, Roller, and Panel Removal Kit
700W Peak 6.5" 2-Way Component Speaker System + + 6.5" Speaker Baffles, Sound Dampening, Roller, and Panel Removal Kit
• 350 watts Peak Each, 175 watts RMS Each
• 1" Neodymium Dome Tweeters
• Polypropylene cone material
• Impedance: 4 ohms
• Sensitivity: 92 dB
• 350 watts Peak Each, 175 watts RMS Each
• 1" Neodymium Dome Tweeters
• Polypropylene cone material
• Impedance: 4 ohms
• Sensitivity: 92 dB
Keep your product protected longer! Extend the warranty after the manufacturer warranty expires. Read more
- Mechanical, electrical and product failure covered! 100% parts and labor covered. (Coverage starts after Mfr. warranty)
- Easy online management! Zero hassle claim service, available 24/7
Cerwin-Vega PH654 with Speaker Installation Kit
Includes: (2) 6.5" Coaxial speaker, 2 Piece Foam Speaker Ring Kit, Sound Damping Kit, Installer Panel Removal Tool Kit, Rubber Roller
Includes: (2) 6.5" Coaxial speaker, 2 Piece Foam Speaker Ring Kit, Sound Damping Kit, Installer Panel Removal Tool Kit, Rubber Roller
• 300 Watts, 150 Watts RMS
•1.50” Double Layer High Temp Voice Coil
• BlackCoated Voice Coil former
• Advanced Voice Coil Heat Sink Design
• 300 Watts, 150 Watts RMS
•1.50” Double Layer High Temp Voice Coil
• BlackCoated Voice Coil former
• Advanced Voice Coil Heat Sink Design
Cerwin Vega H7525C with Speaker Installation Kit
250W RMS 10" Coaxial Car Speakers + Sound Dampening, Roller and Panel Removal Kit
250W RMS 10" Coaxial Car Speakers + Sound Dampening, Roller and Panel Removal Kit
• 500 watts Peak Each, 250 watts RMS Each
• Impedance: 4 ohms
• Sensitivity: 95.9 dB
• 500 watts Peak Each, 250 watts RMS Each
• Impedance: 4 ohms
• Sensitivity: 95.9 dB
Keep your product protected longer! Extend the warranty after the manufacturer warranty expires. Read more
- Mechanical, electrical and product failure covered! 100% parts and labor covered. (Coverage starts after Mfr. warranty)
- Easy online management! Zero hassle claim service, available 24/7
JBL GTO939 with Speaker Installation Kit
600W Peak (200W RMS) 6x9" 3-WayCoaxial Speakers with Speaker Baffles, Sound Dampening, Roller, and Panel Removal Kit
600W Peak (200W RMS) 6x9" 3-WayCoaxial Speakers with Speaker Baffles, Sound Dampening, Roller, and Panel Removal Kit
• Peak Power: 600W
• RMS Power: 200W
• Edge Driven Textile Soft Dome Tweeter
• Mounting Depth: 3" • Plus One Carbon Injected Woofer Cone
• 3 Ohms Impedance
• Sensitivity: 94dB
• Peak Power: 600W
• RMS Power: 200W
• Edge Driven Textile Soft Dome Tweeter
• Mounting Depth: 3" • Plus One Carbon Injected Woofer Cone
• 3 Ohms Impedance
• Sensitivity: 94dB
JL Audio C1-690 (Pair) with Speaker Installation Kit
450W Peak (120W RMS) 6" x 9" C1 2-Way Component Car Speakers (C1690) + NVX Speaker Baffles, Sound Dampening, Roller, and Panel Removal Kit
450W Peak (120W RMS) 6" x 9" C1 2-Way Component Car Speakers (C1690) + NVX Speaker Baffles, Sound Dampening, Roller, and Panel Removal Kit
• 225 Watts Max Each Side, 60 Watts RMS Each Side
• 1", Aluminum Dome Tweeter
• Mineral-Filled, Injection-Molded Polypropylene Cone
• 4 Ohms Impedance
• Sensitivity: 94 dB
• Mounting Depth: 2.75"
• 225 Watts Max Each Side, 60 Watts RMS Each Side
• 1", Aluminum Dome Tweeter
• Mineral-Filled, Injection-Molded Polypropylene Cone
• 4 Ohms Impedance
• Sensitivity: 94 dB
• Mounting Depth: 2.75"
Alpine S2-S69C with Installation Accessories
520W Peak (170W RMS) 6"x9" S-Series 2-way Component Speaker System
520W Peak (170W RMS) 6"x9" S-Series 2-way Component Speaker System
• 260 watts Peak Each, 85 watts RMS Each
• 3/4" Silk Dome Tweeters
• Polypropylene cone material
• Impedance: 4 ohms
• 260 watts Peak Each, 85 watts RMS Each
• 3/4" Silk Dome Tweeters
• Polypropylene cone material
• Impedance: 4 ohms
Polk Audio MM692 with Installation Accessories
300W RMS 6x9" 3-Way Car & Marine Coaxial Speakers with Speaker Baffles, Sound Damping, Roller, and Panel Removal Kit
300W RMS 6x9" 3-Way Car & Marine Coaxial Speakers with Speaker Baffles, Sound Damping, Roller, and Panel Removal Kit
• 450 watts Peak Each, 150 watts RMS Each
• 1" Terylene Dome Tweeters
• Titanium Coated Composite cone material
• Impedance: 4 ohms
• Sensitivity: 94 dB
• 450 watts Peak Each, 150 watts RMS Each
• 1" Terylene Dome Tweeters
• Titanium Coated Composite cone material
• Impedance: 4 ohms
• Sensitivity: 94 dB
JL Audio C7-650CW with Speaker Installation Kit
125 W RMS 6.5" C7 Series Component Midwoofer Car Speaker + NVX Speaker Baffles, Sound Dampening, Roller, and Panel Removal Kit
125 W RMS 6.5" C7 Series Component Midwoofer Car Speaker + NVX Speaker Baffles, Sound Dampening, Roller, and Panel Removal Kit
• 125 Watts RMS Each
• Midwoofer Component Driver
• Vacuum-Formed, Mica-Filled Polypropylene Cone
• 4 Ohms Impedance
• Sensitivity: 90 dB
• Mounting Depth: 2.77"
Make sure it fits.
Select a vehicle
VIP Product Get $119.60 in rewards to spend later
• 125 Watts RMS Each
• Midwoofer Component Driver
• Vacuum-Formed, Mica-Filled Polypropylene Cone
• 4 Ohms Impedance
• Sensitivity: 90 dB
• Mounting Depth: 2.77"
DS18 PRO-EXL108 with Installation Accessories
1200W RMS 10" Series 8-Ohm Mid-Bass Speaker
1200W RMS 10" Series 8-Ohm Mid-Bass Speaker
• 1200 watts Peak Each, 600 watts RMS Each
• Non-Pressed Paper cone material
• Impedance: 8 ohms
• Sensitivity: 97 dB
Make sure it fits.
Select a vehicle
• 1200 watts Peak Each, 600 watts RMS Each
• Non-Pressed Paper cone material
• Impedance: 8 ohms
• Sensitivity: 97 dB
DS18 PRO-X8MSE with Speaker Installation Kit
350W RMS 8" 4-Ohm Midrange Speakers + 8" Speaker Baffles, Sound Dampening, Roller, and Panel Removal Kit
350W RMS 8" 4-Ohm Midrange Speakers + 8" Speaker Baffles, Sound Dampening, Roller, and Panel Removal Kit
• 700 watts Peak Each, 350 watts RMS Each
• Aluminum Bullet Tweeters
• Paper cone material
• Impedance: 4 ohms
• Sensitivity: 99 dB
• 700 watts Peak Each, 350 watts RMS Each
• Aluminum Bullet Tweeters
• Paper cone material
• Impedance: 4 ohms
• Sensitivity: 99 dB
JBL Club 602C with Speaker Installation Kit
420W Peak (140W RMS) 6.5" Club Series 2-Way Component Speaker System + NVX Speaker Baffles, Sound Dampening, Roller, and Panel Removal
420W Peak (140W RMS) 6.5" Club Series 2-Way Component Speaker System + NVX Speaker Baffles, Sound Dampening, Roller, and Panel Removal
• 210 watts Max Each, 70 watts RMS Each
• 3/4" Silk Dome Tweeters
• Polypropylene cone material
• Impedance: 3 ohms
• Sensitivity: 92 dB @ 2.83V
• Mounting Height: 0.47"
• 210 watts Max Each, 70 watts RMS Each
• 3/4" Silk Dome Tweeters
• Polypropylene cone material
• Impedance: 3 ohms
• Sensitivity: 92 dB @ 2.83V
• Mounting Height: 0.47"
Diamond Audio DMD69V with Speaker Installation Kit
280W Peak (140W RMS) 6"x9" DMD Series 2-Way Component Car Speakers + 6x9” Speaker Baffles, Sound Dampening, Roller and Panel Removal Kit
280W Peak (140W RMS) 6"x9" DMD Series 2-Way Component Car Speakers + 6x9” Speaker Baffles, Sound Dampening, Roller and Panel Removal Kit
• 140 watts Peak Each, 70 watts RMS Each
• 3/4" Silk Dome Tweeters
• Polypropylene cone material
• Impedance: 4 ohms
• Sensitivity: 86 dB
• 140 watts Peak Each, 70 watts RMS Each
• 3/4" Silk Dome Tweeters
• Polypropylene cone material
• Impedance: 4 ohms
• Sensitivity: 86 dB
Polk Audio DB6502 6.5" Component Speakers + Sound Dampening Kit
600W Peak (200W RMS) 6.5" DB+ Series 2-way Marine Component Speakers with Sound Dampening
600W Peak (200W RMS) 6.5" DB+ Series 2-way Marine Component Speakers with Sound Dampening
• 300 Watts Max Each, 100 Watts RMS Each
• 0.75" shallow tweeter design
• Polypropylene UV tolerant cone
• 4 Ohms Impedance
• Sensitivity: 92dB
• Mounting Depth: 1.77"
• IP65 rated
• 300 Watts Max Each, 100 Watts RMS Each
• 0.75" shallow tweeter design
• Polypropylene UV tolerant cone
• 4 Ohms Impedance
• Sensitivity: 92dB
• Mounting Depth: 1.77"
• IP65 rated
Kicker 40CS54 Speaker Upgrade For 2007-14 JEEP WRANGLER
450W Peak (150W RMS) 5-1/4" CS Series 2-Way Coaxial Speakers Package
450W Peak (150W RMS) 5-1/4" CS Series 2-Way Coaxial Speakers Package
• 225 Watts Max Each, 75 Watts RMS Each
• 1/2" Polyether imide (PEI) balanced dome tweeter
• Polypropylene mid-woofer cone material
• 4 Ohms Impedance
• Sensitivity: 90dB
• Mounting Depth: 1-3/4"
• 225 Watts Max Each, 75 Watts RMS Each
• 1/2" Polyether imide (PEI) balanced dome tweeter
• Polypropylene mid-woofer cone material
• 4 Ohms Impedance
• Sensitivity: 90dB
• Mounting Depth: 1-3/4"
DS18 PRO-ZT8 with Speaker Installation Kit
Includes: (2) 8” Mid-Range Loudspeaker, 2 Piece Silicone Rubber Speaker Ring Kit, Sound Damping Kit, Installer Panel Removal Tool Kit, Rubber Roller
Includes: (2) 8” Mid-Range Loudspeaker, 2 Piece Silicone Rubber Speaker Ring Kit, Sound Damping Kit, Installer Panel Removal Tool Kit, Rubber Roller
• 550 watts Max, 275 watts RMS
• 1" Aluminum Bullet Tweeter
• Impedance: 4 ohms
• Sensitivity: 98 dB
• Mounting Depth: 3.58"
• 550 watts Max, 275 watts RMS
• 1" Aluminum Bullet Tweeter
• Impedance: 4 ohms
• Sensitivity: 98 dB
• Mounting Depth: 3.58"
Kicker CSS654 with Speaker Installation Kit
300W Peak (100W RMS) 6.5" CS Series Component Speaker System + NVX Speaker Baffles, Sound Dampening, Roller, and Panel Removal Kit
300W Peak (100W RMS) 6.5" CS Series Component Speaker System + NVX Speaker Baffles, Sound Dampening, Roller, and Panel Removal Kit
• 150 watts Max Each, 50 watts RMS Each
• 3/4" Titanium Dome Tweeters
• Polypropylene cone material
• Impedance: 4 ohms
• Sensitivity: 90 dB
• Mounting Depth:
• 150 watts Max Each, 50 watts RMS Each
• 3/4" Titanium Dome Tweeters
• Polypropylene cone material
• Impedance: 4 ohms
• Sensitivity: 90 dB
• Mounting Depth:
Kicker KSC69304 with Speaker Installation Kit
300W Peak (150W RMS) 6”x9” KS Series Triaxial Speakers with Speaker Baffles, Sound Dampening, Roller, and Panel Removal Kit
300W Peak (150W RMS) 6”x9” KS Series Triaxial Speakers with Speaker Baffles, Sound Dampening, Roller, and Panel Removal Kit
• 300 watts Peak Each, 150 watts RMS Each
• 1" Silk Dome Tweeters
• Polypropylene cone material
• Impedance: 4 ohms
• Sensitivity: 92 dB
• 300 watts Peak Each, 150 watts RMS Each
• 1" Silk Dome Tweeters
• Polypropylene cone material
• Impedance: 4 ohms
• Sensitivity: 92 dB
Infinity KAPPA53XF Speakers with Speaker Installation Kit
Kappa Series 5-1/4" 2-Way Coaxial Car Speakers with Speaker Baffles, Sound Dampening and a Heavy Duty Roller
Kappa Series 5-1/4" 2-Way Coaxial Car Speakers with Speaker Baffles, Sound Dampening and a Heavy Duty Roller
• Peak Power: 180W
• RMS Power: 60W
• Edge-driven silk dome tweeter
• Mounting Depth: 2 1/4"
• Plus One+ glass-fiber woofer cone
• Peak Power: 180W
• RMS Power: 60W
• Edge-driven silk dome tweeter
• Mounting Depth: 2 1/4"
• Plus One+ glass-fiber woofer cone
Memphis PRX60C with Speaker Installation Kit
6.75" Power Reference Component Speaker Set
6.75" Power Reference Component Speaker Set
• 100 watts Peak Each, 50 watts RMS Each
• 1" Polypropylene Dome Tweeters
• Polypropylene cone material
• Impedance: 4 ohms
• Sensitivity: 88 dB
• 100 watts Peak Each, 50 watts RMS Each
• 1" Polypropylene Dome Tweeters
• Polypropylene cone material
• Impedance: 4 ohms
• Sensitivity: 88 dB
