These are vehicle-specific plug-and-play adapters for your OEM factory radio that provide pre-amp outputs that make installing an aftermarket amplifier much easier. These solutions eliminate the need to cut and splice into the factory wiring.
Allows you to add an aftermarket amplifier to the factory system in 2016-2021 Honda Accord, Civic, CR-V
• Plug and Play T-harness for faster installation
• 15-band graphic EQ or 5-band Parametric EQ
• Can be used with OE and aftermarket radios
• Settings adjusted wirelessly from smart device
• Selectable high pass, low pass, or bandpass filters
• Plug and Play T-harness for faster installation
• 15-band graphic EQ or 5-band Parametric EQ
• Can be used with OE and aftermarket radios
• Settings adjusted wirelessly from smart device
• Selectable high pass, low pass, or bandpass filters
2-Channel Line Output Converter with Plug and Play T-harness for adding an aftermarket amplifier in Fits Chrysler 2013-Up
• Plug and Play Design (No cutting or splicing)
• Provides 12-volt 500-mA remote wire
• Includes gain level controller to adjust the overall output
• Designed to provide 2-channels of low-level audio
• Plug and Play Design (No cutting or splicing)
• Provides 12-volt 500-mA remote wire
• Includes gain level controller to adjust the overall output
• Designed to provide 2-channels of low-level audio
2-Channel Line Output Converter with Plug and Play T-harness for adding an aftermarket amplifier in select 2008-2018 vehicles from Honda, Acura
• Plug and Play Design (No cutting or splicing)
• Provides 12-volt 500-mA remote wire
• Includes gain level controller to adjust the overall output
• Designed to provide 2-channels of low-level audio
• Plug and Play Design (No cutting or splicing)
• Provides 12-volt 500-mA remote wire
• Includes gain level controller to adjust the overall output
• Designed to provide 2-channels of low-level audio
2-Channel Line Output Converter with Plug and Play T-harness for adding an aftermarket amplifier in select 2019-2022 vehicles from Chevrolet, GMC With RPO IOR
2-Channel Line Output Converter with Plug and Play T-harness for adding an aftermarket amplifier in select 2019-2022 vehicles from Chevrolet, GMC With RPO IOR
• Plug and Play Design (No cutting or splicing)
• Provides 12-volt 500-mA remote wire
• Includes gain level controller to adjust the overall output
• Designed to provide 2-channels of low-level audio
• Plug and Play Design (No cutting or splicing)
• Provides 12-volt 500-mA remote wire
• Includes gain level controller to adjust the overall output
• Designed to provide 2-channels of low-level audio
2-Channel Line Output Converter with Plug and Play T-harness for adding an aftermarket amplifier for Nissan 2007-Up
• Plug and Play Design (No cutting or splicing)
• Provides 12-volt 500-mA remote wire
• Includes gain level controller to adjust the overall output
• Designed to provide 2-channels of low-level audio
• Plug and Play Design (No cutting or splicing)
• Provides 12-volt 500-mA remote wire
• Includes gain level controller to adjust the overall output
• Designed to provide 2-channels of low-level audio
Interface Module that Allows the Addition of an Amplifier in Select 2006 - 2013 General Motors Vehicles [Chevrolet, GMC, Cadillac, etc...]
• Interface Allows Replacement Or Addition Of Amp For Select GM Vehicles • Interface Is Transformer Isolated • Linear From 20-20,000 Hz • Input Connects To Factory Stereo/Vehicle Harness
• Interface Allows Replacement Or Addition Of Amp For Select GM Vehicles • Interface Is Transformer Isolated • Linear From 20-20,000 Hz • Input Connects To Factory Stereo/Vehicle Harness
Interface that Allows Replacement or Addition of an Amplifier in Select Mazda Vehicles Without a Factory Bose Sound System
• Allows Replacement/Addition Of Amp • For Select Mazda Vehicles Without Bose System • Interface Is Transformer Isolated • Maintains Phase • Linear From 20-20,000 Hz • Provides 2:1 Gain
• Allows Replacement/Addition Of Amp • For Select Mazda Vehicles Without Bose System • Interface Is Transformer Isolated • Maintains Phase • Linear From 20-20,000 Hz • Provides 2:1 Gain
2-Channel Line Output Converter with Plug and Play T-harness for adding an aftermarket amplifier in select 2018-2023 vehicles from Toyota
• Plug and Play Design (No cutting or splicing)
• Provides 12-volt 500-mA remote wire
• Includes gain level controller to adjust the overall output
• Designed to provide 2-channels of low-level audio
• Plug and Play Design (No cutting or splicing)
• Provides 12-volt 500-mA remote wire
• Includes gain level controller to adjust the overall output
• Designed to provide 2-channels of low-level audio
Allows you to add an aftermarket amplifier to the factory system in select 2021-2022 vehicles from Ram, Dodge
• Plug and Play T-harness for faster installation
• 31-Band graphic EQ
• Can be used with OE and aftermarket radios
• Settings adjusted via Bluetooth® in a smart device
• Retains U-Connect voice prompts
• Independent high pass, low pass, and bandpass filters
• Plug and Play T-harness for faster installation
• 31-Band graphic EQ
• Can be used with OE and aftermarket radios
• Settings adjusted via Bluetooth® in a smart device
• Retains U-Connect voice prompts
• Independent high pass, low pass, and bandpass filters
Interface that Allows Replacement or Addition of an Amplifier in Select 2004 - 2014 Ford Vehicles without Factory Amplified THX/Sony Sound System
• Allows Replacement/Addition Of Amp • For Select Ford Vehicles Without THX System • Interface Is Transformer Isolated • Maintains Phase • Linear From 20-20,000Hz • Provides 2:1 Gain
• Allows Replacement/Addition Of Amp • For Select Ford Vehicles Without THX System • Interface Is Transformer Isolated • Maintains Phase • Linear From 20-20,000Hz • Provides 2:1 Gain
Used in conjunction with AmpPro Harness when you add an amplifier to your factory radio for select 2007-2019 vehicles from Ram, Dodge, Chrysler w/ Factory Amplified Sound Systems
Used in conjunction with AmpPro Harness when you add an amplifier to your factory radio for select 2007-2019 vehicles from Ram, Dodge, Chrysler w/ Factory Amplified Sound Systems
• Speaker Connection Harness • Compatible with select 2007-2019 vehicles from Ram, Dodge, Chrysler Vehicles • 18" Length • Plug and Play Harness
Amplifier Bypass Speaker Connection Harness for select 2014-2019 vehicles from Chevrolet, GMC, Cadillac.
• Compatible with select 2014-2019 vehicles from Chevrolet, GMC, Cadillac Vehicles
• Connects aftermarket speakers to the factory speaker harness
• Quick and easy installation
• No cutting necessary
• Plugs directly into harness
• Compatible with select 2014-2019 vehicles from Chevrolet, GMC, Cadillac Vehicles
• Connects aftermarket speakers to the factory speaker harness
• Quick and easy installation
• No cutting necessary
• Plugs directly into harness
2-Channel Line Output Converter with Plug and Play T-harness for adding an aftermarket amplifier in Ford 2003-2019
• Plug and Play Design (No cutting or splicing)
• Provides 12-volt 500-mA remote wire
• Includes gain level controller to adjust the overall output
• Designed to provide 2-channels of low-level audio
• Plug and Play Design (No cutting or splicing)
• Provides 12-volt 500-mA remote wire
• Includes gain level controller to adjust the overall output
• Designed to provide 2-channels of low-level audio
2-Channel Line Output Converter with Plug and Play T-harness for adding an aftermarket amplifier in select 2006-2021 vehicles from Chevrolet, GMC, Cadillac
2-Channel Line Output Converter with Plug and Play T-harness for adding an aftermarket amplifier in select 2006-2021 vehicles from Chevrolet, GMC, Cadillac
• Plug and Play Design (No cutting or splicing)
• Provides 12-volt 500-mA remote wire
• Includes gain level controller to adjust the overall output
• Designed to provide 2-channels of low-level audio
• Plug and Play Design (No cutting or splicing)
• Provides 12-volt 500-mA remote wire
• Includes gain level controller to adjust the overall output
• Designed to provide 2-channels of low-level audio
Allows you to add an aftermarket amplifier to the factory system in select 2018-2023 vehicles from Ford
• Plug and Play T-harness for faster installation
• 15-band graphic EQ or 5-band Parametric EQ
• Can be used with OE and aftermarket radios
• Retains OE voice prompts (Sync®)
• Settings adjusted wirelessly from smart device
• Selectable high pass, low pass, or bandpass filters
• Plug and Play T-harness for faster installation
• 15-band graphic EQ or 5-band Parametric EQ
• Can be used with OE and aftermarket radios
• Retains OE voice prompts (Sync®)
• Settings adjusted wirelessly from smart device
• Selectable high pass, low pass, or bandpass filters
2-Channel Line Output Converter with Plug and Play T-harness for adding an aftermarket amplifier in BMW/MINI/VW 2001-2017
• Plug and Play Design (No cutting or splicing)
• Provides 12-volt 500-mA remote wire
• Includes gain level controller to adjust the overall output
• Designed to provide 2-channels of low-level audio
• Plug and Play Design (No cutting or splicing)
• Provides 12-volt 500-mA remote wire
• Includes gain level controller to adjust the overall output
• Designed to provide 2-channels of low-level audio
2-Channel Line Output Converter with Plug and Play T-harness for adding an aftermarket amplifier in select 2010-2017 vehicles from Chevrolet, GMC
• Plug and Play Design (No cutting or splicing)
• Provides 12-volt 500-mA remote wire
• Includes gain level controller to adjust the overall output
• Designed to provide 2-channels of low-level audio
• Plug and Play Design (No cutting or splicing)
• Provides 12-volt 500-mA remote wire
• Includes gain level controller to adjust the overall output
• Designed to provide 2-channels of low-level audio
Allows you to add an aftermarket amplifier to the factory system in With MOST25 Amplifier
• Plug and Play T-harness for faster installation
• 31-band graphic EQ or 5 Band Parametric EQ
• Designed for MOST® amplified sound systems
• Compatible with both Android and Apple devices
• Settings adjusted via Bluetooth® in a smart device
• Selectable high pass, low pass, or bandpass filters
• Plug and Play T-harness for faster installation
• 31-band graphic EQ or 5 Band Parametric EQ
• Designed for MOST® amplified sound systems
• Compatible with both Android and Apple devices
• Settings adjusted via Bluetooth® in a smart device
• Selectable high pass, low pass, or bandpass filters
Wire Harness to Add Rockford Fosgate DSR1 Digital Signal Processor for
• Plug and Play T-Harness allows for faster installation
• Retain Fader Control, Tone, and other functions
• Amplified mode interface reprograms factory radio
• Designed to be used with iDataLink ADS-MAR
• Plug and Play T-Harness allows for faster installation
• Retain Fader Control, Tone, and other functions
• Amplified mode interface reprograms factory radio
• Designed to be used with iDataLink ADS-MAR
Interface Module that Allows the Addition of an Amplifier in Select Non-Amplified 2007-12 Chrysler, Dodge and Jeep Vehicles
• System Interface Kit to Add or Replace An Amplifier • Select 2007-up Chrysler, Dodge and Jeep Vehicles • Not Compatible in Vehilces with Factory Amplified Systems • Add An Amp Interface
• System Interface Kit to Add or Replace An Amplifier • Select 2007-up Chrysler, Dodge and Jeep Vehicles • Not Compatible in Vehilces with Factory Amplified Systems • Add An Amp Interface
Interface for Addition of Amplifier in Select 2004-Up GM Vehicles w/Factory Amplified Bose Sound System
• Interface Allows Replacement/Addition of Amp • For Select GM Vehicles w/Factory Bose System • Interface Is Transformer Isolated • Maintains Phase • Linear From 20-20,000 Hz
• Interface Allows Replacement/Addition of Amp • For Select GM Vehicles w/Factory Bose System • Interface Is Transformer Isolated • Maintains Phase • Linear From 20-20,000 Hz
Interface that Allows Replacement or Addition of an Amplifier in Select 2007-up GM Vehicles
• Interface Allows Replacement Or Addition Of Amp • For Select 2007-Up GM Vehicles • Interface Is Transformer Isolated • Maintains Phase • Linear From 20-20,000Hz • Provides 2:1 Gain And Infinite Attenuation
• Interface Allows Replacement Or Addition Of Amp • For Select 2007-Up GM Vehicles • Interface Is Transformer Isolated • Maintains Phase • Linear From 20-20,000Hz • Provides 2:1 Gain And Infinite Attenuation
2-Channel Line Output Converter with Plug and Play T-harness for adding an aftermarket amplifier in select 2016-2021 vehicles from Honda
• Plug and Play Design (No cutting or splicing)
• Provides 12-volt 500-mA remote wire
• Includes gain level controller to adjust the overall output
• Designed to provide 2-channels of low-level audio
• Plug and Play Design (No cutting or splicing)
• Provides 12-volt 500-mA remote wire
• Includes gain level controller to adjust the overall output
• Designed to provide 2-channels of low-level audio
2-Channel Line Output Converter with Plug and Play T-harness for adding an aftermarket amplifier in Nissan 1995-2013
• Plug and Play Design (No cutting or splicing)
• Provides 12-volt 500-mA remote wire
• Includes gain level controller to adjust the overall output
• Designed to provide 2-channels of low-level audio
• Plug and Play Design (No cutting or splicing)
• Provides 12-volt 500-mA remote wire
• Includes gain level controller to adjust the overall output
• Designed to provide 2-channels of low-level audio
Wire Extension Harness to Replace Factory Amplifier With an Aftermarket Amp for select 2006-2022 vehicles from Ram, Toyota, Ford
• Plug and Play T-Harness allows for faster installation
• Retain Fader Control, Tone, and other functions
• Retains factory wiring integrity
• Designed to be used with iDataLink ADS-MAR
• Plug and Play T-Harness allows for faster installation
• Retain Fader Control, Tone, and other functions
• Retains factory wiring integrity
• Designed to be used with iDataLink ADS-MAR
Wire Extension Harness to Replace Your Factory Amplifier With an Aftermarket Amp for select 2006-2022 vehicles from Ram, Toyota, Ford
• Plug and Play T-Harness allows for faster installation
• Retain Fader Control, Tone, and other functions
• Retains factory wiring integrity
• Designed to be used with iDataLink ADS-MAR
• Plug and Play T-Harness allows for faster installation
• Retain Fader Control, Tone, and other functions
• Retains factory wiring integrity
• Designed to be used with iDataLink ADS-MAR
2-Channel Line Output Converter with Plug and Play T-harness for adding an aftermarket amplifier in select 2016-2020 vehicles from Chevrolet, GMC
• Plug and Play Design (No cutting or splicing)
• Provides 12-volt 500-mA remote wire
• Includes gain level controller to adjust the overall output
• Designed to provide 2-channels of low-level audio
• Plug and Play Design (No cutting or splicing)
• Provides 12-volt 500-mA remote wire
• Includes gain level controller to adjust the overall output
• Designed to provide 2-channels of low-level audio
2-Channel Line Output Converter with Plug and Play T-harness for adding an aftermarket amplifier in Chrysler 2007-2021
• Plug and Play Design (No cutting or splicing)
• Provides 12-volt 500-mA remote wire
• Includes gain level controller to adjust the overall output
• Designed to provide 2-channels of low-level audio
• Plug and Play Design (No cutting or splicing)
• Provides 12-volt 500-mA remote wire
• Includes gain level controller to adjust the overall output
• Designed to provide 2-channels of low-level audio
DSP Interface With Pre-Wired Harness - select 2006-2014 vehicles from Ford
• Includes a DSP (Digital Signal Processor)
• Settings adjusted via Bluetooth® in a smart device application (tablet or mobile phone), compatible with both Android™ and Apple® devices
• 10 individually assignable outputs
• Can be used in amplified and non-amplified models
• Micro-B USB updatable
• Read, write, and store configurations for future recall
• Retains SYNC® voice prompts
• Includes a DSP (Digital Signal Processor)
• Settings adjusted via Bluetooth® in a smart device application (tablet or mobile phone), compatible with both Android™ and Apple® devices
• 10 individually assignable outputs
• Can be used in amplified and non-amplified models
• Micro-B USB updatable
• Read, write, and store configurations for future recall
• Retains SYNC® voice prompts
2-Channel Line Output Converter with Plug and Play T-harness for adding an aftermarket amplifier in Chrysler 2011-2020
• Plug and Play Design (No cutting or splicing)
• Provides 12-volt 500-mA remote wire
• Includes gain level controller to adjust the overall output
• Designed to provide 2-channels of low-level audio
• Plug and Play Design (No cutting or splicing)
• Provides 12-volt 500-mA remote wire
• Includes gain level controller to adjust the overall output
• Designed to provide 2-channels of low-level audio
Wire Harness to Connect Maestro AR Amplifier Replacement Module for select 2011-2020 vehicles from Ford
• Plug and Play T-Harness allows for faster installation
• Retain Fader Control, Tone, and other functions
• Retains factory wiring integrity
• Designed to be used with iDataLink ADS-MAR
• Plug and Play T-Harness allows for faster installation
• Retain Fader Control, Tone, and other functions
• Retains factory wiring integrity
• Designed to be used with iDataLink ADS-MAR
Wire Harness to Replace Your Factory Amplifier With an Aftermarket Amp for select 2012-2016 vehicles from Dodge, Chrysler
• Plug and Play T-Harness allows for faster installation
• Retain Fader Control, Tone, and other functions
• Retains factory wiring integrity
• Designed to be used with iDataLink ADS-MAR
• Plug and Play T-Harness allows for faster installation
• Retain Fader Control, Tone, and other functions
• Retains factory wiring integrity
• Designed to be used with iDataLink ADS-MAR
Wire Harness to Connect Maestro AR Amplifier Replacement Module for select 2015-2020 Ford Mustang
• Plug and Play T-Harness allows for faster installation
• Retain Fader Control, Tone, and other functions
• Rockford Fosgate DSR1 processor also required
• Designed to be used with iDataLink ADS-MAR
• Plug and Play T-Harness allows for faster installation
• Retain Fader Control, Tone, and other functions
• Rockford Fosgate DSR1 processor also required
• Designed to be used with iDataLink ADS-MAR
Wire Harness to Connect Maestro AR Amplifier Replacement Module for select 2009-2020 vehicles from Volkswagen
• Plug and Play T-Harness allows for faster installation
• Amplifier Replacement Harness
• Retains factory wiring integrity
• Designed to be used with iDataLink ADS-MAR
• Plug and Play T-Harness allows for faster installation
• Amplifier Replacement Harness
• Retains factory wiring integrity
• Designed to be used with iDataLink ADS-MAR
Wire Harness to Connect Maestro AR Amplifier Replacement Module for select 2007-2022 vehicles from Ram, Dodge, Chrysler
• Plug and Play T-Harness allows for faster installation
• Retain Fader Control, Tone, and other functions
• Retains factory wiring integrity
• Designed to be used with iDataLink ADS-MAR
• Plug and Play T-Harness allows for faster installation
• Retain Fader Control, Tone, and other functions
• Retains factory wiring integrity
• Designed to be used with iDataLink ADS-MAR
Wire Harness to Connect Maestro AR Amplifier Replacement Module for select 2006-2022 vehicles from Toyota, Subaru
• Plug and Play T-Harness allows for faster installation
• Retain Fader Control, Tone, and other functions
• Retains factory wiring integrity
• Designed to be used with iDataLink ADS-MAR
• Plug and Play T-Harness allows for faster installation
• Retain Fader Control, Tone, and other functions
• Retains factory wiring integrity
• Designed to be used with iDataLink ADS-MAR
OEM Amplifier Replacement Interface for Chrysler, Dodge, Jeep & RAM Vehicles with Uconnect Systems
• Retains U-Connect and navigation prompts • Retains Bluetooth handsfree mode • Allows adjustments for Balancing/Fading, Bass, Mid and Treble frequencies • Retains OEM radio EQ controls • Adjustable bass frequency and level. Includes an under dash mount encoder/bass knob • Remote output to turn on aftermarket amplifier • Includes an OEM amplifier Bypass harness. No cutting of factory wires • Dimension: 5" L x 2.5" W x 8.8" H
• Retains U-Connect and navigation prompts • Retains Bluetooth handsfree mode • Allows adjustments for Balancing/Fading, Bass, Mid and Treble frequencies • Retains OEM radio EQ controls • Adjustable bass frequency and level. Includes an under dash mount encoder/bass knob • Remote output to turn on aftermarket amplifier • Includes an OEM amplifier Bypass harness. No cutting of factory wires • Dimension: 5" L x 2.5" W x 8.8" H
2-Channel Line Output Converter with Plug and Play T-harness for adding an aftermarket amplifier in select 2017-2020 vehicles from Hyundai, Kia
• Plug and Play Design (No cutting or splicing)
• Provides 12-volt 500-mA remote wire
• Includes gain level controller to adjust the overall output
• Designed to provide 2-channels of low-level audio
• Plug and Play Design (No cutting or splicing)
• Provides 12-volt 500-mA remote wire
• Includes gain level controller to adjust the overall output
• Designed to provide 2-channels of low-level audio
Wire Harness to Replace Your Factory Amplifier With an Aftermarket Amp for select 2015-2022 vehicles from Ram, Dodge, Jeep
• Plug and Play T-Harness allows for faster installation
• Primarily for vehicles with Harmon Kardon Audio Systems
• Retain Fader Control, Tone, and other functions
• Retains factory wiring integrity
• Designed to be used with iDataLink ADS-MAR
• Plug and Play T-Harness allows for faster installation
• Primarily for vehicles with Harmon Kardon Audio Systems
• Retain Fader Control, Tone, and other functions
• Retains factory wiring integrity
• Designed to be used with iDataLink ADS-MAR
Allows you to add an aftermarket amplifier to the factory system in select 2018-2023 vehicles from Ford
• Plug and Play T-harness for faster installation
• 31-band graphic EQ or 5-band Parametric EQ
• Can be used with OE and aftermarket radios
• Settings adjusted wirelessly from smart device
• Selectable high pass, low pass, or bandpass filters
• Plug and Play T-harness for faster installation
• 31-band graphic EQ or 5-band Parametric EQ
• Can be used with OE and aftermarket radios
• Settings adjusted wirelessly from smart device
• Selectable high pass, low pass, or bandpass filters
Wire Harness to Connect Maestro AR Amplifier Replacement Module for select 2012-2022 vehicles from Toyota, Subaru, Lexus
• Plug and Play T-Harness allows for faster installation
• Retain Fader Control, Tone, and other functions
• Retains factory wiring integrity
• Designed to be used with iDataLink ADS-MAR
• Plug and Play T-Harness allows for faster installation
• Retain Fader Control, Tone, and other functions
• Retains factory wiring integrity
• Designed to be used with iDataLink ADS-MAR
Install an Aftermarket Amplifier to Your Factory Stereo select 2018-2020 vehicles from Toyota,
• Full-range output equalized output with volume control from stock stereo
• Plug and Play installation
• Interface provides 6-channel output to connect aftermarket amplifiers to an existing stock stereo system
• Full balance and fader control from the factory radio
• Dual LED for troubshooting and programming
• Provides amplifier turn on output for external amplifiers
• Can be used in 2-channel / 4-channel / 6-channel modes
• Full-range output equalized output with volume control from stock stereo
• Plug and Play installation
• Interface provides 6-channel output to connect aftermarket amplifiers to an existing stock stereo system
• Full balance and fader control from the factory radio
• Dual LED for troubshooting and programming
• Provides amplifier turn on output for external amplifiers
• Can be used in 2-channel / 4-channel / 6-channel modes
DSP Interface With Pre-Wired Harness for select 2008-2017 vehicles from GMC, Chevrolet, Cadillac
• Compatible with select 2008-2017 vehicles from GMC, Chevrolet, Cadillac Vehicles
• Includes a DSP (Digital Signal Processor)
• 31 Band graphic EQ
• 10 individually assignable outputs
• Independent equalization on each of the 10 outputs
• Independent high pass, low pass, and bandpass filters
• Each channel can be delayed independently up to 10ms
• Settings adjusted via Bluetooth® in a smart device application (tablet or mobile phone), compatible with both Android™ and Apple® devices
• Compatible with select 2008-2017 vehicles from GMC, Chevrolet, Cadillac Vehicles
• Includes a DSP (Digital Signal Processor)
• 31 Band graphic EQ
• 10 individually assignable outputs
• Independent equalization on each of the 10 outputs
• Independent high pass, low pass, and bandpass filters
• Each channel can be delayed independently up to 10ms
• Settings adjusted via Bluetooth® in a smart device application (tablet or mobile phone), compatible with both Android™ and Apple® devices
DSP Package with AXDSP-X and T-Harness - 2016-2018 Honda Accord, Civic, CR-V
• Includes a DSP (Digital Signal Processor)
• Compatible with Select 2016-2018 Honda Accord, Civic, CR-V Vehicles
• 31 Band graphic EQ
• 6 inputs, 10 individually assignable outputs
• Independent equalization on each of the 10 outputs
• Includes a DSP (Digital Signal Processor)
• Compatible with Select 2016-2018 Honda Accord, Civic, CR-V Vehicles
• 31 Band graphic EQ
• 6 inputs, 10 individually assignable outputs
• Independent equalization on each of the 10 outputs
Wire Harness to Connect Maestro AR Amplifier Replacement Module for 2008-2019 Mitsubishi Outlander, Lancer, Outlander Sport
• Plug and Play T-Harness allows for faster installation
• Retain Fader Control, Tone, and other functions
• Retains factory wiring integrity
• Designed to be used with iDataLink ADS-MAR
• Plug and Play T-Harness allows for faster installation
• Retain Fader Control, Tone, and other functions
• Retains factory wiring integrity
• Designed to be used with iDataLink ADS-MAR
Allows you to add an aftermarket amplifier to the factory system in
• Plug and Play T-harness for faster installation
• 31-band graphic EQ or 5-band Parametric EQ
• Can be used with OE and aftermarket radios
• Settings adjusted wirelessly from smart device
• Selectable high pass, low pass, or bandpass filters
• Plug and Play T-harness for faster installation
• 31-band graphic EQ or 5-band Parametric EQ
• Can be used with OE and aftermarket radios
• Settings adjusted wirelessly from smart device
• Selectable high pass, low pass, or bandpass filters
Wire Harness to Connect iDatalink-compatible Stereo Retain Steering Wheel Controls for select 2011-2017 vehicles from Hyundai, Kia (ADS-MRR or ADS-MRR2 module also required)
Wire Harness to Connect iDatalink-compatible Stereo Retain Steering Wheel Controls for select 2011-2017 vehicles from Hyundai, Kia (ADS-MRR or ADS-MRR2 module also required)
• Retains steering wheel controls, OnStar and Chimes
• Simplified replacement of factory amplifier
• Retains OEM Backup Camera
• Provides 12 volt accessory power (RAP)
• iDatalink-ready radio
• Retains steering wheel controls, OnStar and Chimes
• Simplified replacement of factory amplifier
• Retains OEM Backup Camera
• Provides 12 volt accessory power (RAP)
• iDatalink-ready radio
Wire Harness to Connect Maestro AR Amplifier Replacement Module for select 2008-2021 vehicles from Toyota, Lexus
• Plug and Play T-Harness allows for faster installation
• Retain Fader Control, Tone, and other functions
• Retains factory wiring integrity
• Designed to be used with iDataLink ADS-MAR
• Plug and Play T-Harness allows for faster installation
• Retain Fader Control, Tone, and other functions
• Retains factory wiring integrity
• Designed to be used with iDataLink ADS-MAR
Allows you to add an aftermarket amplifier to the factory system in 2018-2020 Lincoln Navigator, Nautilus
• Plug and Play T-harness for faster installation
• 31-band graphic EQ or 5-band Parametric EQ
• Can be used with OE and aftermarket radios
• Compatible with both Android and Apple devices
• Settings adjusted via Bluetooth® in a smart device
• Plug and Play T-harness for faster installation
• 31-band graphic EQ or 5-band Parametric EQ
• Can be used with OE and aftermarket radios
• Compatible with both Android and Apple devices
• Settings adjusted via Bluetooth® in a smart device
Allows you to add an aftermarket amplifier to the factory system in
• Plug and Play T-harness for faster installation
• 31-band graphic EQ or 5-band Parametric EQ
• Can be used with OE and aftermarket radios
• Settings adjusted wirelessly from smart device
• Selectable high pass, low pass, or bandpass filters
• Plug and Play T-harness for faster installation
• 31-band graphic EQ or 5-band Parametric EQ
• Can be used with OE and aftermarket radios
• Settings adjusted wirelessly from smart device
• Selectable high pass, low pass, or bandpass filters
Allows you to add an aftermarket amplifier to the factory system in
• Plug and Play T-harness for faster installation
• 31-band graphic EQ or 5-band Parametric EQ
• Can be used with OE and aftermarket radios
• Settings adjusted wirelessly from smart device
• Selectable high pass, low pass, or bandpass filters
• Plug and Play T-harness for faster installation
• 31-band graphic EQ or 5-band Parametric EQ
• Can be used with OE and aftermarket radios
• Settings adjusted wirelessly from smart device
• Selectable high pass, low pass, or bandpass filters
Amp Upgrade Interface for Select 2007 - 2014 Ford and Lincoln Vehicles with Amplified Sound Systems
• Works with 2007-2014 Ford and Lincoln Vehicles • Simplifies Amp Installation in Data Bus Controlled Factory Systems • Tons of Audio Customization • Sub Level Control Included • Retains Sync, Bluetooth and Warning Chimes
• Works with 2007-2014 Ford and Lincoln Vehicles • Simplifies Amp Installation in Data Bus Controlled Factory Systems • Tons of Audio Customization • Sub Level Control Included • Retains Sync, Bluetooth and Warning Chimes
Amplifier Replacement Interface for Select 2011 - 2015 Chrysler, Dodge and Maserati Vehicles
• Simplifies Amp Installation • Fits Select 2011-2015 Chrysler, Dodge and Maserati Vehicles • 6-channel RCA outputs, including sub outputs • 5V or 4V output control • Plug and play installation • Wired remote level control knob included
• Simplifies Amp Installation • Fits Select 2011-2015 Chrysler, Dodge and Maserati Vehicles • 6-channel RCA outputs, including sub outputs • 5V or 4V output control • Plug and play installation • Wired remote level control knob included
Allows you to add an aftermarket amplifier to the factory system in
• Plug and Play T-harness for faster installation
• 15-band graphic EQ or 5-band Parametric EQ
• Can be used with OE and aftermarket radios
• Settings adjusted wirelessly from smart device
• Selectable high pass, low pass, or bandpass filters
• Plug and Play T-harness for faster installation
• 15-band graphic EQ or 5-band Parametric EQ
• Can be used with OE and aftermarket radios
• Settings adjusted wirelessly from smart device
• Selectable high pass, low pass, or bandpass filters
Allows you to add an aftermarket amplifier to the factory system in select 1993-2012 vehicles from Mitsubishi
• Plug and Play T-harness for faster installation
• 15-band graphic EQ or 5-band Parametric EQ
• Can be used with OE and aftermarket radios
• Settings adjusted wirelessly in a smart device
• Selectable high pass, low pass, and bandpass filters
• Plug and Play T-harness for faster installation
• 15-band graphic EQ or 5-band Parametric EQ
• Can be used with OE and aftermarket radios
• Settings adjusted wirelessly in a smart device
• Selectable high pass, low pass, and bandpass filters
DSP Interface With Pre-Wired Harness select 2008-2017 vehicles from Nissan
• Designed for SPDIF amplified sound systems
• Includes an amp bypass harness
• Retains BlueLink/UVO voice prompts
• All chimes/voice prompts go through the aftermarket amp
• Adjustable chime level
• Micro-B USB updatable
• Designed for SPDIF amplified sound systems
• Includes an amp bypass harness
• Retains BlueLink/UVO voice prompts
• All chimes/voice prompts go through the aftermarket amp
• Adjustable chime level
• Micro-B USB updatable
DSP Interface with Pre-Wired Harness for select 2018-2021 vehicles from Toyota
• Includes a DSP (Digital Signal Processor)
• 15 Band graphic EQ
• 4 inputs and 6 individually assignable outputs
• Independent equalization for front, rear, and sub
• Easy behind the radio installation with pre-wired harness
• Includes a DSP (Digital Signal Processor)
• 15 Band graphic EQ
• 4 inputs and 6 individually assignable outputs
• Independent equalization for front, rear, and sub
• Easy behind the radio installation with pre-wired harness
DSP Interface With Amp Bypass Harness select 2011-2019 vehicles from Hyundai, Kia
• Includes a DSP (Digital Signal Processor)
• 15 Band graphic EQ
• Selectable crossover slopes; 12db, 24db, 36db, 48db
• Settings adjusted via Bluetooth® in a smart device application (tablet or mobile phone), compatible with both Android™ and Apple® devices
• Retains BlueLink/UVO voice prompts, with adjustable level
• Read, write, and store configurations for future recall
• Micro-B USB updatable
• Includes a DSP (Digital Signal Processor)
• 15 Band graphic EQ
• Selectable crossover slopes; 12db, 24db, 36db, 48db
• Settings adjusted via Bluetooth® in a smart device application (tablet or mobile phone), compatible with both Android™ and Apple® devices
• Retains BlueLink/UVO voice prompts, with adjustable level
• Read, write, and store configurations for future recall
• Micro-B USB updatable
Plug and Play DSP for Factory or Aftermarket Stereos fits
• Includes a DSP (Digital Signal Processor) • Selectable 15 Band graphic EQ or 5 Band Parametric EQ • 4 inputs and 6 individually assignable outputs • Micro-B USB updatable
• Includes a DSP (Digital Signal Processor) • Selectable 15 Band graphic EQ or 5 Band Parametric EQ • 4 inputs and 6 individually assignable outputs • Micro-B USB updatable
2-Channel Line Output Converter with Plug and Play T-harness for adding an aftermarket amplifier in select 2011-2020 vehicles from Ford
• Plug and Play Design (No cutting or splicing)
• Provides 12-volt 500-mA remote wire
• Includes gain level controller to adjust the overall output
• Designed to provide 2-channels of low-level audio
• Plug and Play Design (No cutting or splicing)
• Provides 12-volt 500-mA remote wire
• Includes gain level controller to adjust the overall output
• Designed to provide 2-channels of low-level audio
Allows you to add an aftermarket amplifier to the factory system in select 2019-2024 vehicles from Chevrolet, GMC
• Plug and Play T-harness for faster installation
• 31-Band graphic EQ
• Can be used with OE and aftermarket radios
• Settings adjusted via Bluetooth® in a smart device
• Designed for Ethernet amplifiers
• Independent high pass, low pass, and bandpass filters
• Plug and Play T-harness for faster installation
• 31-Band graphic EQ
• Can be used with OE and aftermarket radios
• Settings adjusted via Bluetooth® in a smart device
• Designed for Ethernet amplifiers
• Independent high pass, low pass, and bandpass filters
AmpPRO SUB Advanced Amplifier Interface for select 2011-2019 vehicles from Ford with Sony systems and 8.4" radio
• Compatible with select 2011-2019 vehicles from Ford Vehicles
• Connect an aftermarket amp and subwoofer to your Ford vehicle's premium sound system
• Quick and easy installation
• No cutting necessary
• Plugs directly into harness
• Compatible with select 2011-2019 vehicles from Ford Vehicles
• Connect an aftermarket amp and subwoofer to your Ford vehicle's premium sound system
• Quick and easy installation
• No cutting necessary
• Plugs directly into harness
DSP Interface With Pre-Wired Harness for select 2001-2017 vehicles from Toyota, Lexus
• Compatible with select 2001-2017 vehicles from Toyota, Lexus Vehicles
• Complete Tuning Control
• Retain Features with a Built-In Interface
• 31-band graphic EQ
• Independent equalization on each of the 10 outputs
• Bass knob included for level control of subwoofer amp
• Designed for non-amplified models
• Settings adjusted wirelessly in a smart device application (tablet or mobile phone)
• Compatible with select 2001-2017 vehicles from Toyota, Lexus Vehicles
• Complete Tuning Control
• Retain Features with a Built-In Interface
• 31-band graphic EQ
• Independent equalization on each of the 10 outputs
• Bass knob included for level control of subwoofer amp
• Designed for non-amplified models
• Settings adjusted wirelessly in a smart device application (tablet or mobile phone)
All About Connect a New Amplifier to Factory Stereo
Harnesses and adapters that make it possible to integrate and add a new aftermarket car amplifier to your factory radio. This will improve your car's original equipment (OEM) stereo system tremendously.
Plug and Play Car Amps Frequently Asked Questions (FAQ)
A plug-and-play car amp, also known as a ""powered subwoofer,"" is an all-in-one audio solution designed for easy installation and convenience. Unlike traditional car amplifiers that require separate wiring and adjustments, plug-and-play amps come pre-installed in a compact enclosure with a built-in amplifier and subwoofer. The setup is straightforward: you connect the amp to the car's audio system using standard RCA cables and wire it to the battery for power. Once connected, the plug-and-play amp enhances the audio experience by boosting bass frequencies and delivering powerful, low-end sound. Its compact size allows it to fit in various locations within the vehicle, making it ideal for those with limited space or who prefer a hassle-free installation process.
Yes, one of the main advantages of a plug-and-play car amp is its ease of installation, making it suitable for DIY enthusiasts. With basic knowledge of car audio systems and some essential tools, most car owners can successfully install a plug-and-play amp without professional assistance. The amp typically comes with detailed installation instructions, and many manufacturers provide online resources and videos for additional guidance. However, if you are uncertain about the installation process or have concerns about your vehicle's electrical system, it's always a good idea to seek professional installation. A professional installer can ensure a seamless integration of the amp into your car audio system, optimize its performance, and address any potential issues to ensure a satisfying audio experience.
Yes, most plug-and-play car amps are compatible with factory head units and aftermarket stereos alike. They are designed to work with a wide range of audio systems, making them versatile and accessible to car owners looking to upgrade their sound quality without changing their head unit. Plug-and-play amps feature RCA inputs that can be connected to the head unit's preamp outputs or speaker-level inputs, allowing them to receive audio signals and enhance the bass response. However, it's essential to check the specific compatibility of the plug-and-play amp with your car's make and model. Some manufacturers offer amp wiring kits with adapters that ensure a seamless connection to various head units, simplifying the installation process further.
Yes, plug-and-play car amps are designed for portability and can be easily removed and transferred to another vehicle. Their compact and self-contained design allows for simple disconnection from the current car's audio system, making them a convenient option for car owners who frequently switch vehicles or lease their cars. To transfer the amp, you'll need to disconnect the RCA cables and power wires from the current vehicle and carefully remove the amp from its mounting location. Once removed, you can install the amp in the new vehicle following the same installation process. However, before transferring the amp, ensure that it is compatible with the audio system of the new vehicle and that the power requirements are suitable for the vehicle's electrical capacity.
Plug-and-play car amps offer several benefits that make them an attractive choice for car audio enthusiasts. First and foremost, they provide a simplified installation process, eliminating the need for complex wiring and adjustments typically associated with traditional amplifiers. This ease of installation saves time and effort, making it an ideal solution for DIY installations. Additionally, plug-and-play amps are compact and take up minimal space in the vehicle, making them suitable for small cars or tight installations. They also come pre-tuned and optimized for sound quality, ensuring that you get a powerful and clear bass response without the need for fine-tuning. Moreover, their portability allows for easy removal and transfer to other vehicles, providing flexibility and convenience. Whether you're a car audio novice or a seasoned enthusiast, a plug-and-play car amp can elevate your audio experience with minimal hassle and maximum impact.
Looking for hassle-free audio upgrades for your car? Explore our top-quality selection of plug and play car amps right here! Sonic Electronix brings you the most reliable and convenient plug and play solutions to elevate your car audio experience. Don't miss out on the opportunity to take your sound system to the next level with ease.
Plug and Play Car Amps - Effortless Audio Upgrades
Plug and play car amps are a game-changer for car enthusiasts who want to enhance their audio system without the complexities of traditional installations. These amps come pre-configured and ready to use, making the upgrade process a breeze. With no need for extensive wiring or technical expertise, anyone can enjoy a significant boost in audio performance.
One of the key advantages of plug and play car amps is their versatility. They are designed to seamlessly integrate with your existing audio system, whether you have a factory or aftermarket head unit. This ensures compatibility and a smooth installation process.
Additionally, plug and play car amps are highly portable. You can easily transfer them between vehicles or remove them when needed, making them an ideal choice for those who love to switch up their ride or take their audio system to different events.
Expert Assistance - Finding Your Perfect Plug and Play Car Amp
At Sonic Electronix, we understand that navigating the world of car audio can be overwhelming. That's why our experienced team is here to help you every step of the way. If you have questions about compatibility, performance, or any other aspect of plug and play car amps, don't hesitate to reach out to us at 1-502-200-8010. Our friendly staff is ready to assist you and ensure you make the right choice for your audio needs.
AmpliFinder - Your Plug and Play Car Amp Matchmaker
Not sure which plug and play car amp is the best fit for your vehicle? Our AmpliFinder tool has got you covered! Simply enter your car's make, model, and year, and AmpliFinder will curate a list of plug and play car amps that perfectly match your vehicle's specifications. This innovative tool takes the guesswork out of finding the ideal audio upgrade, saving you time and effort.
Popular Brands in Connect a New Amplifier to Factory Stereo
Shop all brands
Hide all brands
We love people and we're ready to help you!
See what separates us from our competition.
Free perks, no PrimeTM fees
Take advantage of our VIP rewards like 10% back on your purchases, free 2-day shipping, extended warranties, and free returns! Gain access to all of these rewards without any membership fees.
Free install gear for stereos
Get great discounted (and possibly FREE) installation accessories with most car stereo purchases. This includes dash kits, wiring harnesses and antenna adapters that you will need to properly install your new car stereo.
Authentic & Authorized
We are an Authorized Dealer for all the brands we sell, including the most premium brands in car and marine audio such as Hertz, JL Audio, NVX, Rockford Fosgate, Kicker, Alpine, Kenwood and many more.
View best sellers, deals, and more
Shop Deals and get up to 30% off premium brands! Shop Now! We are always looking out for the best products and deals to offer our customers. Don’t pay too much by shopping elsewhere!
Learn about All Car Audio
We have information on brands, gear, and more for you to explore! Check out our YouTube Channel for helpful how-to videos, product reviews, and Q&As. For a more detailed look, also visit our Learning Center!
Call or email our experts
Our trained experts are here to assist you! They are just a phone call or click away to help you get the right gear for you and your vehicle!