160W Peak (80W RMS) 1" Mylar Balanced Dome Car Tweeters
160W Peak (80W RMS) 1" Mylar Balanced Dome Car Tweeters
1" Prime Series Tweeter Kit • RMS: 80 Watts Per Set / 40 Watts Each Side • Peak: 160 Watts Per Set / 80 Watts Each Side • Lightweight Mylar Dome Tweeter • Frequency Response: 2,500 - 22,000 Hz • Grilles/Trim Rings Included
1" Niobium Micro Dome Tweeters
1" Niobium Micro Dome Tweeters
1-inch Niobium Micro Dome Tweeters • 200W MAX • 110W RMS • Polished Aluminum Housing • 4 Ohm
150W RMS 1" (25mm) Silk-Dome V-Series Car Audio Tweeters
150W RMS 1" (25mm) Silk-Dome V-Series Car Audio Tweeters
• 1" V-Series Component Tweeters
• Neodymium Motor
• 225W Peak Each
• 75W RMS Each
• 4 Ohms Impedance
• Silk Dome
• Injection Molded Chamber • Aluminum Voice Coil
In stock
- Save 50% off a Sound Damping Kit with Your Purchase!
- 50% Off True Spec EnvyFlex Speaker Wire with Purchase!
1" TWT Series PEI Dome Tweeters
1" TWT Series PEI Dome Tweeters
• 220 Watts Max, 110 Watts RMS
• 1" PEI Dome Tweeter
Surface or Angle Mountable
• 4 ohms Impedance
1" Surface/Angle-Mount Micro Dome Tweeters with Niobium Magnets (same as NB.18)
1" Surface/Angle-Mount Micro Dome Tweeters with Niobium Magnets (same as NB.18)
1" Surface/Angle-Mount NB Series Tweeters • 200W Max • 100W RMS • Polypropylene diaphragm • Niobium (Ferroelectric Transducer) magnets • Surface or angle mount • Built-in crossover • No magnetic field • 4 ohms impedance
240W Peak (120W RMS) 7/8-Inch Hard-Dome Tweeter (Pair)
240W Peak (120W RMS) 7/8-Inch Hard-Dome Tweeter (Pair)
• 120W Max • 40W RMS • 7/8" Polypropylene/Titanium Hard Dome • Surface and flush mount compatible • Strontium and Magnetic Fluid structure
In stock
100W Peak (50W RMS) 4-Ohm 3/4" dome tweeters
100W Peak (50W RMS) 4-Ohm 3/4" dome tweeters
• Titanium tweeter construction and neodymium magnets reveal subtle details
• 4-ohm impedance
• Built-in poly-switch protection for higher volumes
• Sensitivity: 92 dB
• Three tweeter mounting options including flush, angled and surface
In stock
3/4" 300W Max (100W RMS) Surface/Angle/Flush Mount Edge-Driven Dome Tweeter
Use code "JBL20" at checkout for 20% off!
3/4" 300W Max (100W RMS) Surface/Angle/Flush Mount Edge-Driven Dome Tweeter
Use code "JBL20" at checkout for 20% off!
• 3/4" Stadium GTO Series Car Tweeters
• Soft Dome Edge-Driven Tweeter
• 150W Max Each
• 50W RMS
Each
• 2.5 ohms Impedance
• In-Line High-Pass Crossover Included
• 13/16" Voice Coil
• Flush, Angle, Surface Mountable
In stock
150W Peak (75W RMS) 1" Poly Dome Tweeters
150W Peak (75W RMS) 1" Poly Dome Tweeters
• 1" Poly Dome Tweeters
• 150 watts Max Power
• 4 ohm impedance
• Mounting: Surface or Angle
• Frequency Response: 5,000 - 20,000 Hz
• Sensitivity: 95 dB
300W Peak (150W RMS) 1" Flush/Angle/Surface/Swivel-mount KS-Series Silk Dome Car Tweeters
300W Peak (150W RMS) 1" Flush/Angle/Surface/Swivel-mount KS-Series Silk Dome Car Tweeters
• 1" KS Series Car Tweeters
• Silk Dome Tweeters
• 150W Max
• 75W RMS
• 4 ohms Impedance
• In-line 12dB Crossovers
• Lightweight Neodymium Magnets
In stock
- FREE Sound Damping Kit to stop the rattles/vibrations!
500W 1" XED Series Piezo Dome Car Stereo Tweeters
500W 1" XED Series Piezo Dome Car Stereo Tweeters
• 500 Watts Max
• 1" Piezo Dome Tweeter
Sensitivity: 97dB
• 4 ohms Impedance
In stock
Pair of 1" 4 ohm Tweeters with 4 Possible Mounting Options and Built-in Crossover
Pair of 1" 4 ohm Tweeters with 4 Possible Mounting Options and Built-in Crossover
1" Car Tweeters • Polypropylene Tweeter Diaphragm • Includes Hardware for Flush, Surface, and Angled Mounting Options • Built-in Crossover • Rare Earth Niobium Ferroelectric Transducer Magnet
300W Peak (120W RMS) 1" C1 Component Car Tweeters
300W Peak (120W RMS) 1" C1 Component Car Tweeters
• 150 Watts Max Each, 60 Watts RMS Each
• 1" Aluminum Dome Tweeter
• 4 Ohms Impedance
• Sensitivity: 91.5dB
• Mounting Depth: .4", Flush-Mount
240W Peak (120W RMS) 1" Punch Series Car Tweeters Kit
Use code "ROCK10" at checkout for 10% off!
240W Peak (120W RMS) 1" Punch Series Car Tweeters Kit
Use code "ROCK10" at checkout for 10% off!
1" Punch Series Car Tweeters Kit • 60 Watts RMS Each • Butyl Rubber Surround • PEI Dome Tweeter • Discreet Dual Clamp Tweeter Mounting • Recessed Tweeter Mount
In stock
- Get 50% off Sound Damping to stop the rattles/vibrations!
1" KFC Series High Efficiency Car Dome Tweeters
1" KFC Series High Efficiency Car Dome Tweeters
• 80W Max
• 40W RMS
• 1" Polyetherimide Dome Tweeter
• 4 ohms Impedance
• In-Line Crossover Capacitor
• Angled Surface Mountable
In stock
- FREE Sound Damping Kit to stop the rattles/vibrations!
300W Peak (120W RMS) 3/4" C1 Component Car Tweeters
300W Peak (120W RMS) 3/4" C1 Component Car Tweeters
• 150 Watts Max Each, 60 Watts RMS Each
• 3/4" Aluminum Dome Tweeter
• 6 Ohms Impedance
• Sensitivity: 91dB
• Mounting Depth: .4", Flush-Mount
1-1/2" Punch Series Car Tweeter with 4ohm Voice Coil
1-1/2" Punch Series Car Tweeter with 4ohm Voice Coil
1-1/2" Punch Series Car Tweeter • Aluminum Bullet Construction • 100W Max • 50W RMS • 4 ohms Impedance • Integrated 6dB High-Pass Crossover • High-Temperature Voice Coil • CEA-2031 Compliant
In stock
- FREE Sound Damping Kit to stop the rattles/vibrations!
1-Inch Dome Tweeter (80W RMS)
1-Inch Dome Tweeter (80W RMS)
• 1-Inch Dome Tweeter
• Peak: 240 Watts
• RMS: 80 Watts
• Impedance: 6 ohms
• Sensitivity: 88dB SPL (1W @1m)
• Frequency Response: 1k Hz to 22kHz
In stock
240W Peak (120W RMS) 3/4" Soft Dome Tweeters
240W Peak (120W RMS) 3/4" Soft Dome Tweeters
• 120W Max • 40W RMS • 3/4" rubber polyester soft dome tweeter • Flush and surface mounting capabilities • -6dB/oct. Capacitor Included for Tweeter Protection • Poly-Imide Voice Coil Bobbin
1" 110W Surface/Angle/Flush Mount Dome Tweeter(s)
1" 110W Surface/Angle/Flush Mount Dome Tweeter(s)
• 1" Car Tweeters
• PEI Dome Tweeter
• 110W Max
• 4 ohms Impedance
• 12dB/Octave Crossovers
• Neodymium Magnet
