Hertz SV 200L (2-Pairs, 4-Total)
2000W Peak (1000W RMS) 8" SPL Show Series 4-ohm component woofers (2-Pairs)
2000W Peak (1000W RMS) 8" SPL Show Series 4-ohm component woofers (2-Pairs)
• 500 watts Peak Each, 250 watts RMS Each
• Pulp cotton fiber cone material
• Impedance: 4 ohm
• Sensitivity: 94.5 dB
• 500 watts Peak Each, 250 watts RMS Each
• Pulp cotton fiber cone material
• Impedance: 4 ohm
• Sensitivity: 94.5 dB
Hertz ML700.3 (2-Pairs, 4-Total)
200W Peak (100W RMS) 3" Mille Legend Series 4 Ohm Car Midrange Speakers + Grille (2-Pairs)
200W Peak (100W RMS) 3" Mille Legend Series 4 Ohm Car Midrange Speakers + Grille (2-Pairs)
• 50 Watts Max Each, 25 Watts RMS Each
• Pressed-pulp cone with cotton fibres
• Neodymium Tweeter magnet
• 4 Ohm Impedance
• Sensitivity: 90 dB
• 50 Watts Max Each, 25 Watts RMS Each
• Pressed-pulp cone with cotton fibres
• Neodymium Tweeter magnet
• 4 Ohm Impedance
• Sensitivity: 90 dB
Hertz MLK165.3 (2-Pairs, 4-Total)
600W Peak (300W RMS) 6.5" Mille Legend Series 2-Way 4 Ohm component speaker system (2-Pairs)
600W Peak (300W RMS) 6.5" Mille Legend Series 2-Way 4 Ohm component speaker system (2-Pairs)
• 150 Watts Max Each, 75 Watts RMS Each
• Pressed-pulp cone with cotton fibers cone material
• Tetolon Tweeter Dome
• 4 Ohm Impedance
• Sensitivity: 91 dB
• 150 Watts Max Each, 75 Watts RMS Each
• Pressed-pulp cone with cotton fibers cone material
• Tetolon Tweeter Dome
• 4 Ohm Impedance
• Sensitivity: 91 dB
Hertz MLK700.3 (2-Pairs, 4-Total)
400W Peak (200W RMS) 3" drivers and 1-7/16" tweeters Mille LEGEND Series 2-Way Component speaker system (2-Pairs)
400W Peak (200W RMS) 3" drivers and 1-7/16" tweeters Mille LEGEND Series 2-Way Component speaker system (2-Pairs)
• 100 Watts Max Each, 50 Watts RMS Each
• Pressed-pulp cone with cotton fibers cone material
• Tetolon Tweeter Dome
• 4 Ohm Impedance
• Sensitivity: Midrange: 90 dB Tweeter: 92 dB
• 100 Watts Max Each, 50 Watts RMS Each
• Pressed-pulp cone with cotton fibers cone material
• Tetolon Tweeter Dome
• 4 Ohm Impedance
• Sensitivity: Midrange: 90 dB Tweeter: 92 dB
JVC CS-DR621 (2-Pairs, 4-Total)
1200W Peak (200W RMS) 6.5" DRVN Series 2-Way Coaxial Car Speakers (2-Pairs)
1200W Peak (200W RMS) 6.5" DRVN Series 2-Way Coaxial Car Speakers (2-Pairs)
• 300 watts Peak Each, 50 watts RMS Each
• 1" Polymide Balanced Dome Tweeters
• Carbon Mica cone material
• Impedance: 4 ohm
• Sensitivity: 89 dB
• 300 watts Peak Each, 50 watts RMS Each
• 1" Polymide Balanced Dome Tweeters
• Carbon Mica cone material
• Impedance: 4 ohm
• Sensitivity: 89 dB
JVC CS-DR601C (2-Pairs, 4-Total)
1440W Peak (240W RMS) 6.5" DRVN Series 2-Way Component Car Speakers (2-Pairs)
1440W Peak (240W RMS) 6.5" DRVN Series 2-Way Component Car Speakers (2-Pairs)
• 360 watts Peak Each, 60 watts RMS Each
• 1" Poly-Ether Imide Balanced Dome Tweeters
• Carbon Mica cone material
• Impedance: 4 ohm
• Sensitivity: 88 dB
• 360 watts Peak Each, 60 watts RMS Each
• 1" Poly-Ether Imide Balanced Dome Tweeters
• Carbon Mica cone material
• Impedance: 4 ohm
• Sensitivity: 88 dB
Rockford Fosgate Punch P16-S (2-Pairs, 4-Total)
480W Peak (240W RMS) 6" Punch Series 2-Way Component Speakers System (2-Pairs)
480W Peak (240W RMS) 6" Punch Series 2-Way Component Speakers System (2-Pairs)
• 120 watts Peak Each, 60 watts RMS Each
• 1" PEI (Polyetherimide) Dome Tweeters
• Injection Molded Polypropylene - IMPP cone material
• Impedance: 4 ohm
• Sensitivity: 87.2 dB
• 120 watts Peak Each, 60 watts RMS Each
• 1" PEI (Polyetherimide) Dome Tweeters
• Injection Molded Polypropylene - IMPP cone material
• Impedance: 4 ohm
• Sensitivity: 87.2 dB
Alpine DM-65C-G 2 Pairs
800W Peak (200W RMS) 6.5" M Series 2-way 4-ohm Component Car Speakers
800W Peak (200W RMS) 6.5" M Series 2-way 4-ohm Component Car Speakers
• 200 watts Peak Each, 50 watts RMS Each
• Teteron Dome tweeters
• Injection Molded Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 92 dB
• 200 watts Peak Each, 50 watts RMS Each
• Teteron Dome tweeters
• Injection Molded Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 92 dB
Alpine PXE-C80-88 + BRV-S65C + BRV-S65 w/ XBAF65
900W RMS Class D PXE Series 8 Channel Car Amplifier + 6.5" BassRevz Speaker System w/ 2 Piece 6.5" or 6.75" Weatherproof Silicone Rubber Speaker Baffle Kit
900W RMS Class D PXE Series 8 Channel Car Amplifier + 6.5" BassRevz Speaker System w/ 2 Piece 6.5" or 6.75" Weatherproof Silicone Rubber Speaker Baffle Kit
• 50 watts x 6 channel + 150 watts x 2 channel @ 4 ohm
• 50 watts x 6 channel + 300 watts x 2 channel @ 2 ohm
• Total RMS Power: 900 watts
• Class D 4 ohm Stable 8-Channel Amplifier
• 50 watts x 6 channel + 150 watts x 2 channel @ 4 ohm
• 50 watts x 6 channel + 300 watts x 2 channel @ 2 ohm
• Total RMS Power: 900 watts
• Class D 4 ohm Stable 8-Channel Amplifier
Alpine PXE-C80-88, BRV-S65C & BRV-S65, SMW10D4 (x2) w/ NVX Amp Kit and Baffles
900W RMS Class D PXE Series 8 Channel Car Amplifier, 6.5" BassRevz Speaker System, (2) NVX SMW10D4 w/ XKit46 Amp Kit and XBaf65 Speaker Baffles
900W RMS Class D PXE Series 8 Channel Car Amplifier, 6.5" BassRevz Speaker System, (2) NVX SMW10D4 w/ XKit46 Amp Kit and XBaf65 Speaker Baffles
• 50 watts x 6 channel + 150 watts x 2 channel @ 4 ohm
• 50 watts x 6 channel + 300 watts x 2 channel @ 2 ohm
• Total RMS Power: 900 watts
• Class D 4 ohm Stable 8-Channel Amplifier
• 50 watts x 6 channel + 150 watts x 2 channel @ 4 ohm
• 50 watts x 6 channel + 300 watts x 2 channel @ 2 ohm
• Total RMS Power: 900 watts
• Class D 4 ohm Stable 8-Channel Amplifier
DS18 PRO-X6M with Speaker Installation Kit
Includes: (2) 6.5” Mid-Range Loudspeaker with Bullet, 2 Piece Foam Speaker Ring Kit, Sound Damping Kit
Includes: (2) 6.5” Mid-Range Loudspeaker with Bullet, 2 Piece Foam Speaker Ring Kit, Sound Damping Kit
• 500 watts Max
• 250 watts RMS
• Non-Pressed Paper cone material
• Impedance: 8 ohm
• Sensitivity: 90 dB
• Mounting Depth: 2.44"
Save $30 on install kits for this speaker
- Lower Front Door with adapters required
- Rear Door with adapters required
• 500 watts Max
• 250 watts RMS
• Non-Pressed Paper cone material
• Impedance: 8 ohm
• Sensitivity: 90 dB
• Mounting Depth: 2.44"
(Pair) DS18 GEN-X5.7 with Speaker Installation Kit
Includes: (2) 6.5” Mid-Range Loudspeaker with Bullet, 2 Piece Foam Speaker Ring Kit, Sound Damping Kit
Includes: (2) 6.5” Mid-Range Loudspeaker with Bullet, 2 Piece Foam Speaker Ring Kit, Sound Damping Kit
• 250W RMS 6.5” PRO-X Series Speakers
• 2 Piece Foam Speaker Ring Kit
• 1.38 Square Feet of Sound Damping
Save $25 on install kits for this speaker
- Lower Front Door with adapters required
- Rear Door with adapters required
• 250W RMS 6.5” PRO-X Series Speakers
• 2 Piece Foam Speaker Ring Kit
• 1.38 Square Feet of Sound Damping
DS18 PRO-X6.4BMSLIM with Speaker Installation Kit
(2) 6.5” Mid-Range Loudspeakers + 6.5"Speaker Baffles, Sound Dampening, Roller, and Panel Removal Kit
(2) 6.5” Mid-Range Loudspeakers + 6.5"Speaker Baffles, Sound Dampening, Roller, and Panel Removal Kit
• 500 watts Peak
• 250 watts RMS
• Non-Pressed Paper cone material
• Impedance: 4 ohm
• Sensitivity: 94 dB
• Mounting Depth: 2.15"
Save $30 on install kits for this speaker
- Lower Front Door with adapters required
- Rear Door with adapters required
• 500 watts Peak
• 250 watts RMS
• Non-Pressed Paper cone material
• Impedance: 4 ohm
• Sensitivity: 94 dB
• Mounting Depth: 2.15"
(2) DS18 PRO-SM69.2 with Speaker Installation Kit
Includes: (2) 6.5” Mid-Range Loudspeaker, 2 Piece Foam Speaker Ring Kit, Sound Damping Kit, Rubber Roller
Includes: (2) 6.5” Mid-Range Loudspeaker, 2 Piece Foam Speaker Ring Kit, Sound Damping Kit, Rubber Roller
• 250W RMS 6.5” PRO-X Series Speakers
• 2 Piece Foam Speaker Ring Kit
• 1.38 Square Feet of Sound Damping
• Sound Dampening Rubber Roller
Save $30 on install kits for this speaker
- Lower Front Door with adapters required
- Rear Door with adapters required
• 250W RMS 6.5” PRO-X Series Speakers
• 2 Piece Foam Speaker Ring Kit
• 1.38 Square Feet of Sound Damping
• Sound Dampening Rubber Roller
DS18 ZXI-654 with Speaker Installation Kit
Includes: (Pair) 6.5” Coaxial Speakers, 2 Piece Foam Speaker Ring Kit, Sound Damping , Roller and Panel Removal Kit
Includes: (Pair) 6.5” Coaxial Speakers, 2 Piece Foam Speaker Ring Kit, Sound Damping , Roller and Panel Removal Kit
• 240 watts Max Each, 80 watts RMS Each
• 1" PEI (Polyetherimide) Dome Tweeters
• Carbon Fiber cone material
• Impedance: 4 ohm
• Sensitivity: 89dB dB
• Mounting Depth: 2.36"
Save $6 on install kits for this speaker
- Lower Front Door with adapters required
- Rear Door with adapters required
• 240 watts Max Each, 80 watts RMS Each
• 1" PEI (Polyetherimide) Dome Tweeters
• Carbon Fiber cone material
• Impedance: 4 ohm
• Sensitivity: 89dB dB
• Mounting Depth: 2.36"
Hertz CX 130 with Speaker Installation Kit
6.5" Cento Series 2-Way Component Speaker system
6.5" Cento Series 2-Way Component Speaker system
• 160 Watts Max Each, 55 Watts RMS Each
•Pressed-paper cone cone material
• Tetolon Tweeter dome
• 4 Ohm Impedance
• Sensitivity: 92.5 dB
Save $30 on install kits for this speaker
- Lower Front Door with adapters required
- Rear Door with adapters required
• 160 Watts Max Each, 55 Watts RMS Each
•Pressed-paper cone cone material
• Tetolon Tweeter dome
• 4 Ohm Impedance
• Sensitivity: 92.5 dB
Hertz MPK165.3 with Speaker Installation Kit
6.5" Mille PRO Series 2-Way 4 Ohm Component speaker system
6.5" Mille PRO Series 2-Way 4 Ohm Component speaker system
• 110 Watts Max Each, 55 Watts RMS Each
• Pressed-pulp cone with cotton fibers cone material
• Tetolon Tweeter Dome
• 4 Ohm Impedance
• Sensitivity: 92 dB
Save $30 on install kits for this speaker
- Lower Front Door with adapters required
- Rear Door with adapters required
• 110 Watts Max Each, 55 Watts RMS Each
• Pressed-pulp cone with cotton fibers cone material
• Tetolon Tweeter Dome
• 4 Ohm Impedance
• Sensitivity: 92 dB
DS18 EXL-SQ6.5 with Speaker Installation Kit
Includes: 6.5” Coaxial Speakers w/ PIE Dome Tweeters, 2 Piece Foam Speaker Ring Kit, Sound Damping Kit, Installer Panel Removal Tool Kit, Rubber Roller
Includes: 6.5” Coaxial Speakers w/ PIE Dome Tweeters, 2 Piece Foam Speaker Ring Kit, Sound Damping Kit, Installer Panel Removal Tool Kit, Rubber Roller
• 400 watts Max Each, 120 watts RMS Each
• 1.14" PEI (Polyetherimide) Dome Tweeters
• Glass Fiber cone material
• Impedance: 3 ohm
• Sensitivity: 90 dB
• Mounting Depth: 2.55"
Save $30 on install kits for this speaker
- Lower Front Door with adapters required
- Rear Door with adapters required
• 400 watts Max Each, 120 watts RMS Each
• 1.14" PEI (Polyetherimide) Dome Tweeters
• Glass Fiber cone material
• Impedance: 3 ohm
• Sensitivity: 90 dB
• Mounting Depth: 2.55"
2 Pairs Kicker 6.5" Speakers (KSC65) w/ Free Speaker Install Kit
400W Peak 6.5" KS Series 2-Way Coaxial Speakers with Panel Removal Tool Kit, NVX Sound Damping Speaker Kit, Roller, and Foam Koozie Bundle
400W Peak 6.5" KS Series 2-Way Coaxial Speakers with Panel Removal Tool Kit, NVX Sound Damping Speaker Kit, Roller, and Foam Koozie Bundle
- Kicker 400W Peak (200W RMS) 6.5" KS Series Coaxial Speakers
- 12-Piece Master Panel Removal Tool Kit
- Premium Sound Damping Speaker Kit with two 10" x 10" Sheets
- Universal Professional Heavy Duty Rubber Roller
- Premium Polyurethane Foam Can Insulator Sleeve Koozie
Save $30 on install kits for this speaker
- Lower Front Door with adapters required
- Rear Door with adapters required
- Kicker 400W Peak (200W RMS) 6.5" KS Series Coaxial Speakers
- 12-Piece Master Panel Removal Tool Kit
- Premium Sound Damping Speaker Kit with two 10" x 10" Sheets
- Universal Professional Heavy Duty Rubber Roller
- Premium Polyurethane Foam Can Insulator Sleeve Koozie
4) Rockford Fosgate R1T-S 1" 160 Watts Component Car Audio Tweeters System Kit
160W Peak (80W RMS) 1" Mylar Balanced Dome Car Tweeters Package
160W Peak (80W RMS) 1" Mylar Balanced Dome Car Tweeters Package
1" Prime Series Tweeter Kit • RMS: 80 Watts Per Set / 40 Watts Each Side • Peak: 160 Watts Per Set / 80 Watts Each Side • Lightweight Mylar Dome Tweeter • Frequency Response: 2,500 - 22,000 Hz • Grilles/Trim Rings Included
1" Prime Series Tweeter Kit • RMS: 80 Watts Per Set / 40 Watts Each Side • Peak: 160 Watts Per Set / 80 Watts Each Side • Lightweight Mylar Dome Tweeter • Frequency Response: 2,500 - 22,000 Hz • Grilles/Trim Rings Included







































