Programmers, Testers, & Meters

• LED Voltage Gauge
• Accurate Reading
• Easy to Read LED Display
• 3 Wire Installation
• Flush or Mountable

Distortion Detector/Analyzer (DD1) • Distortion Detector's Circuitry Is 100% Analog • Distortion Detection Trigger Level > 1.0% Harmonic Distortion • Operating Range of Input Signal is 1.2Vrms – 125Vrms. (15,000 Watts at 1 ohm) Autoranging • Signal Present LED Trigger Voltage 750mVrms

• Tone Generator
• Speaker Polarity Tester
• Perfect Troubleshooting and Testing
• Output Range of 0-8 Volts
• Includes RCA and Alligator Clips
• 9V Speaker Popper
• Auto Shutoff

• Measuring sound pressure level (SPL)
• Measuring current, maximum and minimum voltage
• Frequency range from 20 to 120 Hz
• Amplitude range from 120 to 165 dB
• Included portable Power Supply

• Red LED Voltage Display • Universal Mounting • Monitor System Voltage • Easy Installation

• Features easy-to-read 2-3/4" Digital display
• Updates 2.5 times per second
• Low battery indicator
• Over range indicator
• Includes two 36 in. 18 gauge CCA test leads

• Measure True Amplifier Power Output
• Measure DC Voltage Drops
• Measure Common DC Voltages
• Measure Impedance of Speakers
• Measure Phase Difference

• Check Gain Overlap Settings
• Input Voltage Capacity Raised to 200Vrms
• RMS AC Voltmeter Built-in

Crossover Calibrator • Also Matches The Gain Settings On Amp(s) • Circuitry Is Digital Microprocessor Controlled • Crossover -3dB Point Accuracy +/- 0.25dB • Auto-Shut Off Timer

• Instant Voltage Accuracy
• 200 Millisecond Response Time
• Input Range: 6v-30v3
• Voltage Reading Range: 10.1v - 15.8v

• Built-in signal generator (sine, noise)
• Distortion (clip) detector
• Transmits data to PC via USB or Wi-Fi
• Two Lab-Bus ports for connecting sensors
• 8 control buttons
• Graphic display with back light
•Spl-Lab Measuring Center software for Windows

• Features easy-to-read 2" Digital display
• Updates 2.5 times per second
• Low battery indicator
• Over range indicator
• Includes two 24 in. 18 gauge CCA test leads

• All In One Tester/Tone Generator
• Speaker tester with 9V
• RCA cable tester
• Easy to use control knobs
• Auto off function

• Microphone for measuring AFC
• One Lab-Bus port for transmitting data
• Frequency range from 10 to 20000 Hz
• Amplitude range from 50 to 120 dB
• Calibrated according to Audiomatica CLIO
• Anodized aluminum body

• For use with aftermarket sound systems or accessories like wenches
• Built-In SMD VM-1 Volt Meter
• Industrial-strength quadruple fuse holder
• Stainless steel hardware
• Also works in marine applications

Tone Generator • Speaker Polarity Tester • Perfect Troubleshooting and Testing • Output Range of 0-8 Volts • Includes RCA and Alligator Clips • 9V Speaker Popper • Auto Shutoff

• Calibrated, full range, omni-directional test and measurement microphone
• Direct connection to iOS devices running iOS 6.1 or later
• Redesigned to minimize the effect of high-frequency diffraction
• Features increased max SPL handling – up to 140 dB SPL
• Keeps iOS device charged during extending use with included AC adapter

• Includes audio tracks for tuning (sine, sweep-tones, noise)
• Amplitude range from 110 to 190 dB
• Frequency range from 10 to 120 Hz
• Free software for Windows
• Vacuum suction cup included

• Micro-light two-line LCD display
• Frequency range from 10 to 120 Hz
• Amplitude range from 120 to 185 dB
• Calibrated according to the TERM-LAB
• Shockproof plastic material
• Free Windows software

• Frequency response: 20 - 20,000 Hz
• Dynamic range: 136 dB SPL
• 15-foot microphone cable included

• Omnidirectional measurement microphone
• Ideal for on-the-go audio tuning
• .39" back electret microphone
• Frequency response: 20 - 20,000 Hz
• Phantom power: 10 - 52DVC

• Measures noise level in the entire audible range
• Defining the harmonic distortion coefficient
• Frequency range from 10 to 20,000 Hz
• Amplitude range from 80 to 150 dB
• Wide dynamic range of 70 dB
• Audio tracks for tuning (sine, sweep-tones, noise)
• Spl-Lab Measuring Center software for Windows and Android

• Conductance technology, simple, fast, accurate
• Vehicle battery test
• Vehicle charging system test
• Vehicle starting system test
• Use the USB interface to connect to the computer

Distortion Detector/Analyzer (DD1) • Distortion Detector's Circuitry Is 100% Analog • Distortion Detection Trigger Level > 1.0% Harmonic Distortion • Operating Range of Input Signal is 1.2Vrms – 125Vrms. (15,000 Watts at 1 ohm) Autoranging • Signal Present LED Trigger Voltage 750mVrms

• Indicators: Sound/Vibration
• Operating Frequency: 4kHz
• Power Consumption: 270W Max
• Operating Voltage: 9V

• Measures sound pressure level (SPL)
• Measures Voltage
• Amplitude range from 120 to 160 dB
• Frequency range from 20 to 120 Hz
• Calibrated according to TERM-LAB Classic and Magnum
• Bright display for easy visibility

• 12V - 18V Volt DC Car/Marine Voltage Meter Gauge
• LED Color: Red
• Input Voltage: 12 Volt - 24 Volt
• Measure Voltage: 6 - 33 Volts

• Calibrated according to the TERM-LAB Classic and Magnum
• Amplitude range from 110 to 190 dB
• Frequency range from 10 to 120 Hz
• ADC module and WiFi module
• Wired and wireless data transfer
• Vacuum suction cups included
• Shockproof plastic material

• Four Lab-Bus ports for connecting sensors
• Data transmission to a PC, tablet PC, or smartphone
• Internal Wi-Fi module
• Spl-Lab Measuring Center software for Windows
• Three-coloured LED

• Impedance Meter/Signal Generator
• Obtains Driver's T/S Parameters
• Find Tuning Frequency of Passive Radiator
• Locate Rattles in Vehicle

• Electric protection system
• (1)Lab-Bus port for transmitting data
• Measures voltage from 1 to 300 volt
• Measures impedance
• Measures alternating current circuits with frequency up to 15000 Hz
• Dual-channel ADC module
• Shockproof plastic material