Steve Meade Designs Ground Distribution Blocks at Sonic Electronix

Steve Meade Designs Ground Distribution Blocks

Filters
Loading...
Filters
This specifies what the intended use of the distribution block is. Fused distribution blocks are intended to be used with the power wire and the fuse acts as a short-circuit or surge protection so your amplifier is not as likely to be damaged. Non-fused distribution blocks can used with ground or power wire connections, but the protection on power wire connections will not be present as there is no fuse in the distribution block. Therefore, we recommend your amplifier has an external fuse for short-circuit or surge protection. When using either type of distribution block, it is recommended to use a main fuse holder within 18 inches of the battery.
This is the number of fuses that the item requires to work properly.
This is the total number of input connections that go into the unit.
This is the largest gauge wire that will fit into the power and ground terminals of this device. The lower the gauge number, the thicker the wire is. For example, a 4 gauge wire is thicker than an 8 gauge wire and thus has higher current carrying capacity. Always do your best to get this size wire to reduce the risk of damage to your components.
This is the total number of output connections that the unit will produce.
This number refers to the maximum size of wire that will fit into the output connector(s) of the capacitor, battery terminal, or any other connector with an wire output.
listview icon
gridview icon
SMD Split Distribution Block

Power/ Ground Distribution Block (Split Block)

SMD-DISTRIBUTION-BLOCK-SPLIT main
Go to item page

Power/ Ground Distribution Block (Split Block)

• Easy-to-use bus/bar distribution block
• 12 Ring Terminal Connections
• Use when installing multiple amps
• 3/4" PVC body
• 1/4" aluminum bus bar
• 3/16" Clear acrylic cover
• Use as a grounding block or positive distribution

1
SMD Split Distribution Block

Power/ Ground Distribution Block (Split Block)

In stock

$109.48 (33.33% off)
$72.99
SMD Single Distribution Block

Power/ Ground Distribution Block (Half Block)

SMD-SINGLE-DISTRIBUTION-BLOCK-SHORT main
Go to item page

Power/ Ground Distribution Block (Half Block)

• Easy-to-use bus/bar distribution block
• 6 Ring Terminal Connections
• Use when installing multiple amps
• 3/4" PVC body
• 1/4" aluminum bus bar
• 3/16" Clear acrylic cover
• Use as a grounding block or positive distribution

1
SMD Single Distribution Block

Power/ Ground Distribution Block (Half Block)

In stock

 
$39.99
SMD Full Distribution Block

Power/ Ground Distribution Block (Full Bar)

SMD-DISTRIBUTION-BLOCK-FULL main
Go to item page

Power/ Ground Distribution Block (Full Bar)

• Easy-to-use bus/bar distribution block
• 14 Ring Terminal Connections
• Use when installing multiple amps
• 3/4" PVC body
• 1/4" aluminum bus bar
• 3/16" Clear acrylic cover
• Use as a grounding block or positive distribution

SMD Full Distribution Block

Power/ Ground Distribution Block (Full Bar)

In stock

$112.48 (33.33% off)
$74.99
SMD 25" Distribution Bar

25" Power / Ground Distribution Bar (32 Slot)

SMD-DISTRIBUTION-BLOCK-32SLOT main
Go to item page

25" Power / Ground Distribution Bar (32 Slot)

• Easy-to-use bus/bar distribution block
• 32 Ring Terminal Connections
• Use when installing multiple amps
• 3/4" PVC body
• 1/4" aluminum bus bar
• 3/16" Clear acrylic cover
• Use as a grounding block or positive distribution

SMD 25" Distribution Bar

25" Power / Ground Distribution Bar (32 Slot)

In stock

Only 2 Left!

$181.98 (28.57% off)
$129.99
    clear all items