Diamond Audio Powered Car Subwoofers with a Box & Amp at Sonic Electronix

Diamond Audio Powered Car Subwoofers with a Box & Amp

Filters
Loading...
Filters
This value represents the number of speakers or subwoofers that the enclosure accommodates.
Refers to the diameter of the subwoofer, measured in inches.
Represents the style of the enclosure. Be sure to purchase the appropriate enclosure type and internal volume that will be compatible with your subwoofer's recommendation.

Sealed - Sealed boxes are those that have no holes or vents in it. The only hole in a sealed box is where the subwoofer is installed. Smaller sealed boxes require more power than a larger sealed box. They provide a tight, accurate bass, while the larger sealed enclosures provide a "boomier" and louder bass.

Ported / Vented - Ported/Vented Enclosures provide an even boomier, louder bass, but less accurate then a small, sealed box. Ported enclosures typically require more airspace per sub and also less power output from an amplifier to perform correctly.

Bandpass - Bandpass enclosures make subwoofers perform efficiently, but loose. The bass is not as "boomy" as a ported enclosure nor as punchy as a sealed enclosure. Bandpass enclosures work well with lower to mid-level subwoofers.
This is the total RMS power handling of all the subwoofers included in the package or enclosure.

If the loaded enclosure or amplifier and subwoofer package includes more than a single subwoofer, then this is the total RMS power handling for all of the subs combined.

The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend giving your subwoofer(s) 75% - 90% of the recommended RMS rating.
listview icon
gridview icon
Diamond Audio DPAS10

Powered Active 10" Subwoofer Enclosure with Hybrid/Vented/Passive Radiator Design

DPAS10 main
Go to item page

Powered Active 10" Subwoofer Enclosure with Hybrid/Vented/Passive Radiator Design

• RMS: 150 Watts / Peak: 300 Watts
• Nominal Impedance: 2Ω
• Frequency Response: 30Hz - 150Hz
• Balanced differential Hi/Lo inputs for noise-free operation
• 12dB octave adjustable crossover
• Hybrid/Vented/Passive Radiator enclosure design for higher output

Diamond Audio DPAS10

Powered Active 10" Subwoofer Enclosure with Hybrid/Vented/Passive Radiator Design

Available

Ships in 1-2 weeks

$349.99 (2.86% off)
$339.99

Item Added to Cart

DPAS10 small

Powered Active 10" Subwoofer Enclosure with Hybrid/Vented/Passive Radiator Design

$349.99

Keep Shopping

NVX SDTK20

Trunk Kit - 20 Square Feet of Sound Dampening Material (Five 18" x 32" Pieces)

$59.99

Add

Don't see the accessory you're looking for?
View all available accessories for the Diamond Audio DPAS10.
    clear all items