T-Spec Power Distribution Blocks at Sonic Electronix

T-Spec Power Distribution Blocks

Filters
Loading...
Filters
This specifies what the intended use of the distribution block is. Fused distribution blocks are intended to be used with the power wire and the fuse acts as a short-circuit or surge protection so your amplifier is not as likely to be damaged. Non-fused distribution blocks can used with ground or power wire connections, but the protection on power wire connections will not be present as there is no fuse in the distribution block. Therefore, we recommend your amplifier has an external fuse for short-circuit or surge protection. When using either type of distribution block, it is recommended to use a main fuse holder within 18 inches of the battery.
For accessories, this is the type of fuse that is required for the item to work properly.

For fuses, this is the type of fuse.

This is the number of fuses that the item requires to work properly.
This is the total number of input connections that go into the unit.
This is the largest gauge wire that will fit into the power and ground terminals of this device. The lower the gauge number, the thicker the wire is. For example, a 4 gauge wire is thicker than an 8 gauge wire and thus has higher current carrying capacity. Always do your best to get this size wire to reduce the risk of damage to your components.
This is the total number of output connections that the unit will produce.
This number refers to the maximum size of wire that will fit into the output connector(s) of the capacitor, battery terminal, or any other connector with an wire output.
listview icon
gridview icon
T-Spec V-DIST-PWR

Battery Terminal 3 Position Distribution Block

V-DIST-PWR main
Go to item page

Battery Terminal 3 Position Distribution Block

• Independently MANL fused outputs
• (1) 1/0 AWG - 8 AWG In
• (3) 4 AWG - 10 AWG Out
• Nickel finish for durability
• Compact design for simpler installation
• Solid brass construction for maximum conductivity

1
T-Spec V-DIST-PWR

Battery Terminal 3 Position Distribution Block

In stock

$41.00 (14.63% off)
$35.00

Item Added to Cart

V-DIST-PWR small

Battery Terminal 3 Position Distribution Block

$35.00

Keep Shopping

T-Spec V8-MANL40

V8 Series 40A Nickel Plated MANL Fuses

$3.00

Add

Don't see the accessory you're looking for?
View all available accessories for the T-Spec V-DIST-PWR.
T-Spec VFDB4

MANL 4 Position Distribution Block

VFDB4 main
Go to item page

MANL 4 Position Distribution Block

• MANL 4 Position Distribution Block
• Small Footprint
• 1) 1/0 AWG Input
• (4) 4/8 AWG outputs

T-Spec VFDB4

MANL 4 Position Distribution Block

In stock

Only 3 Left!

 
$36.00

Item Added to Cart

VFDB4 small

MANL 4 Position Distribution Block

$36.00

Keep Shopping

T-Spec V8-MANL40

V8 Series 40A Nickel Plated MANL Fuses

$3.00

Add

Don't see the accessory you're looking for?
View all available accessories for the T-Spec VFDB4.
T-Spec VDB1

2-Position Distribution Block

VDB1 main
Go to item page

2-Position Distribution Block

• Water-resistant
• (1) 1/0 AWG input
• (2) 1/0 AWG outputs
• Gate lock technology

T-Spec VDB1

2-Position Distribution Block

In stock

 
$27.00
T-Spec VPNB4

MANL 4-Position All-in-One Distribution Block

VPNB4 main
Go to item page

MANL 4-Position All-in-One Distribution Block

• (2) 1/0 ga inputs for power
• (4) 4/8 ga MANL fused power outputs
• >Small Footprint with compact brass design
• All in one compact block

T-Spec VPNB4

MANL 4-Position All-in-One Distribution Block

Special order

Ships at Later Date

 
$45.00
T-Spec VDB4

1/0- to 4 AWG input, four 4/8 AWG outputs 4 Position Distribution Block

VDB4 main
Go to item page

1/0- to 4 AWG input, four 4/8 AWG outputs 4 Position Distribution Block

• Water-resistant
• (1) 1/0-4 AWG inputs
• (4) 4/8 AWG outputs
• Gate lock technology

T-Spec VDB4

1/0- to 4 AWG input, four 4/8 AWG outputs 4 Position Distribution Block

In stock

 
$26.00
VFDB2

Dual MANL V12 Series Fused Distribution Block w/ 1/0 Gauge Input and Two 4/8 Gauge Output

VFDB2 main
Go to item page

Dual MANL V12 Series Fused Distribution Block w/ 1/0 Gauge Input and Two 4/8 Gauge Output

• Dual MANL V12 Series Fused Distribution Block w/ 1/0 Gauge Input and Two 4/8 Gauge Output
• Solid Brass Construction For Better Power Transfer
• Water Resistant Housing
• Fuse Type: Dual MANL
• Proprietary Black Coating

9
VFDB2

Dual MANL V12 Series Fused Distribution Block w/ 1/0 Gauge Input and Two 4/8 Gauge Output

Special order

Ships at Later Date

$28.00 (14.29% off)
$24.00

Item Added to Cart

VFDB2 small

Dual MANL V12 Series Fused Distribution Block w/ 1/0 Gauge Input and Two 4/8 Gauge Output

$24.00

Keep Shopping

T-Spec V8-MANL40

V8 Series 40A Nickel Plated MANL Fuses

$3.00

Add

Don't see the accessory you're looking for?
View all available accessories for the VFDB2.
T-Spec VDB2

1/0 AWG In - 4/8 AWG Out 2-Position Distribution Block

VDB2 main
Go to item page

1/0 AWG In - 4/8 AWG Out 2-Position Distribution Block

• Water-resistant
• (1) 1/0-4 AWG inputs
• (2) 4/8 AWG outputs
• Gate lock technology

T-Spec VDB2

1/0 AWG In - 4/8 AWG Out 2-Position Distribution Block

In stock

 
$25.00
T-Spec VFDB4

Quad MANL V12 Series Fused Distribution Block w/ 1/0 Gauge Input & Two 4/8 Gauge Output

VFDB4 main
Go to item page

Quad MANL V12 Series Fused Distribution Block w/ 1/0 Gauge Input & Two 4/8 Gauge Output

• Quad Mini-ANL V12 Series Fused Distribution Block w/ 1/0 Gauge Input and Two 4/8 Gauge Outputs
• Solid Brass Construction For Better Power Transfer
• Water Resistant Housing
• Fuse Type: Fuse Type: MANL
• Proprietary Black Coating

2
T-Spec VFDB4

Quad MANL V12 Series Fused Distribution Block w/ 1/0 Gauge Input & Two 4/8 Gauge Output

Special order

Ships at Later Date

$36.00 (44.47% off)
$19.99

Item Added to Cart

VFDB4 small

Quad MANL V12 Series Fused Distribution Block w/ 1/0 Gauge Input & Two 4/8 Gauge Output

$19.99

Keep Shopping

T-Spec V8-MANL40

V8 Series 40A Nickel Plated MANL Fuses

$3.00

Add

Don't see the accessory you're looking for?
View all available accessories for the T-Spec VFDB4.
T-Spec VFDB2

MANL 1/0 to 4/8 Gauge 2 Position Distribution Block

VFDB2 main
Go to item page

MANL 1/0 to 4/8 Gauge 2 Position Distribution Block

• 1/0 AWG Inputs
• 4/8 Gauge Outputs
• Flat Black Finish
• Compact

T-Spec VFDB2

MANL 1/0 to 4/8 Gauge 2 Position Distribution Block

OUT OF STOCK

 
$24.00
T-Spec VPNB2

MANL 1/0 to 4/8 Gauge 2-Position All-in-One Distribution Block

VPNB2 main
Go to item page

MANL 1/0 to 4/8 Gauge 2-Position All-in-One Distribution Block

• 2-Position All-in-One Distribution Block
• (1) 1/0 AWG Positive input (1) 1/0 AWG Negative input
• 2) 4/8 AWG Positive outputs (2) 4/8 AWG Negative outputs

T-Spec VPNB2

MANL 1/0 to 4/8 Gauge 2-Position All-in-One Distribution Block

OUT OF STOCK

 
$26.00

Item Added to Cart

VPNB2 small

MANL 1/0 to 4/8 Gauge 2-Position All-in-One Distribution Block

$26.00

Keep Shopping

T-Spec V8-MANL40

V8 Series 40A Nickel Plated MANL Fuses

$3.00

Add

Don't see the accessory you're looking for?
View all available accessories for the T-Spec VPNB2.
    clear all items