Cerwin-Vega Angled & Truck Loaded Sub Boxes at Sonic Electronix

Cerwin-Vega Angled & Truck Loaded Sub Boxes

Filters
Loading...
Filters
This value represents the number of speakers or subwoofers that the enclosure accommodates.
Represents the style of the enclosure. Be sure to purchase the appropriate enclosure type and internal volume that will be compatible with your subwoofer's recommendation.

Sealed - Sealed boxes are those that have no holes or vents in it. The only hole in a sealed box is where the subwoofer is installed. Smaller sealed boxes require more power than a larger sealed box. They provide a tight, accurate bass, while the larger sealed enclosures provide a "boomier" and louder bass.

Ported / Vented - Ported/Vented Enclosures provide an even boomier, louder bass, but less accurate then a small, sealed box. Ported enclosures typically require more airspace per sub and also less power output from an amplifier to perform correctly.

Bandpass - Bandpass enclosures make subwoofers perform efficiently, but loose. The bass is not as "boomy" as a ported enclosure nor as punchy as a sealed enclosure. Bandpass enclosures work well with lower to mid-level subwoofers.
Refers to the diameter of the subwoofer, measured in inches.
This is the total RMS power handling of all the subwoofers included in the package or enclosure.

If the loaded enclosure or amplifier and subwoofer package includes more than a single subwoofer, then this is the total RMS power handling for all of the subs combined.

The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend giving your subwoofer(s) 75% - 90% of the recommended RMS rating.
This is the Total Peak Power handling of all the subwoofers included in the package or enclosure.

If the loaded enclosure or amplifier and subwoofer package includes more than a single subwoofer, then this is the total peak power handling for all of the subs combined.

Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements.
The box style or shape refers to the actual shape of the box. Square and rectangular boxes are straight-edged boxes on all sides, whereas hatchback and truck style enclosures feature an angled front or back design that allows for installation in places short on depth such as single cab pickup trucks. You can also use such enclosures in hatchback cars or other vehicles where space is a premium. Tube and cylinder shaped boxes were made popular by Bazooka and are a great option for those looking for a nice amount of bass without sacrificing lots of space. They may even fit in locations that slim truck boxes cannot fit in. If the enclosure is vehicle specific, we encourage you to read the product description to find out which vehicles the enclosure is made for.
listview icon
gridview icon
Cerwin-Vega XE10DV

XED Series Dual 10” Subwoofer in Factory-Tuned Vented Enclosure

XE10DV main
Go to item page

XED Series Dual 10” Subwoofer in Factory-Tuned Vented Enclosure

• 1600W Max / 450W RMS
• Nominal Impedance: 2 ohm
• Voice Coil: 2.0” (4-Layer)
• 3/4” MDF Vented Enclosure
• Polypropylene (PP) Cone

3
Cerwin-Vega XE10DV

XED Series Dual 10” Subwoofer in Factory-Tuned Vented Enclosure

In stock

 
$139.99

Item Added to Cart

XE10DV small

XED Series Dual 10” Subwoofer in Factory-Tuned Vented Enclosure

$139.99

Keep Shopping

NVX Speaker Wire (XWS1225)

25 ft. of True 12 Gauge EnvyFlex Speaker Cable/Wire (100% Oxygen-Free Copper)

$29.99

Add
NVX Sound Dampening Trunk Kit (SDTK20)

20 Square Feet of Sound Dampening Material (Five 18" x 32" Pieces)

$59.99

Add

Don't see the accessory you're looking for?
View all available accessories for the Cerwin-Vega XE10DV.
Cerwin-Vega XE12DV

XED Series Dual 12” Subwoofer in Factory-Tuned Vented Enclosure

XE12DV main
Go to item page

XED Series Dual 12” Subwoofer in Factory-Tuned Vented Enclosure

• 1600W Max / 450W RMS
• Nominal Impedance: 2 ohm
• Voice Coil: 2.0” (4-Layer)
• 3/4” MDF Vented Enclosure
• Polypropylene (PP) Cone

1
Cerwin-Vega XE12DV

XED Series Dual 12” Subwoofer in Factory-Tuned Vented Enclosure

In stock

 
$149.99

Item Added to Cart

XE12DV small

XED Series Dual 12” Subwoofer in Factory-Tuned Vented Enclosure

$149.99

Keep Shopping

NVX Speaker Wire (XWS1225)

25 ft. of True 12 Gauge EnvyFlex Speaker Cable/Wire (100% Oxygen-Free Copper)

$29.99

Add
NVX Sound Dampening Trunk Kit (SDTK20)

20 Square Feet of Sound Dampening Material (Five 18" x 32" Pieces)

$59.99

Add

Don't see the accessory you're looking for?
View all available accessories for the Cerwin-Vega XE12DV.
Cerwin Vega H6E12SV

1000W Max (250W RMS) HED Series Single 12" Vented Subwoofer Enclosure

H6E12SV main
Go to item page

1000W Max (250W RMS) HED Series Single 12" Vented Subwoofer Enclosure

• 1000W Max (250W RMS) Single 12" Vented Subwoofer Enclosure
• 10" HED Series Subwoofer
• 3/4" MDF Construction with Black Carpet
• 1 Pair of Spring Terminals
• Enclosure Dimensions: 7.98" TD x 14.08" BD x 20.98" W x 15" H

Cerwin Vega H6E12SV

1000W Max (250W RMS) HED Series Single 12" Vented Subwoofer Enclosure

Special order

Ships at Later Date

$229.99 (34.78% off)
$149.99

Item Added to Cart

H6E12SV small

1000W Max (250W RMS) HED Series Single 12" Vented Subwoofer Enclosure

$149.99

Keep Shopping

NVX Speaker Wire (XWS1225)

25 ft. of True 12 Gauge EnvyFlex Speaker Cable/Wire (100% Oxygen-Free Copper)

$29.99

Add
NVX Sound Dampening Trunk Kit (SDTK20)

20 Square Feet of Sound Dampening Material (Five 18" x 32" Pieces)

$59.99

Add

Don't see the accessory you're looking for?
View all available accessories for the Cerwin Vega H6E12SV.
Cerwin Vega H6E10SV

100W Max (250W RMS) HED Series 10" Single Loaded Slot-Vented Enclosure

H6E10SV main
Go to item page

100W Max (250W RMS) HED Series 10" Single Loaded Slot-Vented Enclosure

• HED Single 10” Subwoofer in Factory-Tuned Vented Enclosure
• 3/4” MDF Vented Enclosure
• 250W RMS / 1000W Max
• Parabolic One Piece Stamped Carbon Fiber Poly Cone

Cerwin Vega H6E10SV

100W Max (250W RMS) HED Series 10" Single Loaded Slot-Vented Enclosure

In stock

$169.99 (17.65% off)
$139.99

Item Added to Cart

H6E10SV small

100W Max (250W RMS) HED Series 10" Single Loaded Slot-Vented Enclosure

$139.99

Keep Shopping

NVX Speaker Wire (XWS1225)

25 ft. of True 12 Gauge EnvyFlex Speaker Cable/Wire (100% Oxygen-Free Copper)

$29.99

Add
NVX Sound Dampening Trunk Kit (SDTK20)

20 Square Feet of Sound Dampening Material (Five 18" x 32" Pieces)

$59.99

Add

Don't see the accessory you're looking for?
View all available accessories for the Cerwin Vega H6E10SV.
Cerwin-Vega XE10SV

XED Series Single 10” Subwoofer in Factory-Tuned Vented Enclosure

SALE XE10SV main
Go to item page

XED Series Single 10” Subwoofer in Factory-Tuned Vented Enclosure

• 800W Max / 225W RMS
• Nominal Impedance: 2 ohm
• Voice Coil: 2.0” (4-Layer)
• 3/4” MDF Vented Enclosure
• Polypropylene (PP) Cone

Cerwin-Vega XE10SV

XED Series Single 10” Subwoofer in Factory-Tuned Vented Enclosure

OUT OF STOCK

 
$99.99

Item Added to Cart

XE10SV small

XED Series Single 10” Subwoofer in Factory-Tuned Vented Enclosure

$99.99

Keep Shopping

NVX Speaker Wire (XWS1225)

25 ft. of True 12 Gauge EnvyFlex Speaker Cable/Wire (100% Oxygen-Free Copper)

$29.99

Add
NVX Sound Dampening Trunk Kit (SDTK20)

20 Square Feet of Sound Dampening Material (Five 18" x 32" Pieces)

$59.99

Add

Don't see the accessory you're looking for?
View all available accessories for the Cerwin-Vega XE10SV.
    clear all items