JL Audio 6x8" Component Speakers at Sonic Electronix

JL Audio 6x8" Component Speakers

A must have for many vehicles, JL Audio 6x8" component speakers provide great sounding audio.
Loading...
Refers to the size of the speaker measured in inches. Every vehicle has standard application sizes. Please use our vehicle fitment guide for your vehicle's specific speaker sizes if you do not know them.
This is the manufacturer product line of speakers.
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
 
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
The number of individual drivers in a car speaker. Speakers with 2 drivers are known as a 2-way, and 3 drivers are known as a 3-way. Component systems are often referred to as "separates" because the tweeter is not attached to the midwoofer (main speaker driver) and mounts separately in a location such as a door post. Component systems typically come with an external crossover so you can easily adjust the high and low frequencies sent to both the midwoofer and the tweeter. Center channel speakers are great for those looking to have surround sound in their vehicle.
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
This means that the subwoofer/speaker is designed to be installed in areas that do not have a lot of space. Shallow mount subwoofers are typically found under a seat or behind the seat in some trucks.

Shallow mount speakers will typically have a mounting depth of 2" or less, while shallow mount subwoofers will typically have a mounting depth of 3" or less.

Designs such as cone, dome, semi-dome, balanced dome, and whizzer are most popular. Cone tweeters are simple, efficient and typically are the most reasonably priced. Dome tweeters are used in most home speakers, and provide a smoother and more accurate sound. Semi-dome design is one with a dome placed inside a cone. A Balanced dome driver is a semi-dome with equal reproduction area given the cone and dome portions of the driver. A whizzer tweeter is a separate tweeter cone driven by the voice coil of the woofer.
listview icon
gridview icon
JL Audio C3-570

(450W Max) 5" x 7" 2-Way Evolution C3 Series Convertible Component/Coaxial Car Speaker System

C3-570 main
Go to item page

(450W Max) 5" x 7" 2-Way Evolution C3 Series Convertible Component/Coaxial Car Speaker System

• Peak Power: 225 watts per channel
• RMS Power: 75 watts per channel
• 2-Way Convertible Component/Coaxial Speakers System
• Mineral-Filled Polypropylene Cone
• 1" Silk Dome Tweeter
• DMA-Optimized Motor System
• Symmetrical Roll Spider

7
JL Audio C3-570

(450W Max) 5" x 7" 2-Way Evolution C3 Series Convertible Component/Coaxial Car Speaker System

In stock

 
Vip Icon $569.99

SET

Hide info
More info Item page
3 Special offers
  • Get A Free $100 Dollar Gift Card With Purchase!
  • Get a FREE Set of Stinger F.A.S.T. Rings with Purchase!
  • FREE Sound Damping Kit to stop the rattles/vibrations!
JL Audio C3-570 + Free NVX Sound Deadening and Roller

(450W Max) 5" x 7" 2-Way Evolution C3 Series Convertible Component/Coaxial Car Speaker System

C3-570, SDSK2 main
Go to item page

(450W Max) 5" x 7" 2-Way Evolution C3 Series Convertible Component/Coaxial Car Speaker System

• Peak Power: 225 watts per channel
• RMS Power: 75 watts per channel
• 2-Way Convertible Component/Coaxial Speakers System
• Mineral-Filled Polypropylene Cone
• 1" Silk Dome Tweeter
• DMA-Optimized Motor System
• Symmetrical Roll Spider

179
JL Audio C3-570 + Free NVX Sound Deadening and Roller

(450W Max) 5" x 7" 2-Way Evolution C3 Series Convertible Component/Coaxial Car Speaker System

In stock

 
$569.99

SET

JL Audio C5-570 {open box complete)

(450W Max) Evolution C5 Series 5" x 7" 2-Way Component Speaker System

C5-570 main
Go to item page

(450W Max) Evolution C5 Series 5" x 7" 2-Way Component Speaker System

• Peak Power: 225W per channel
• RMS Power: 75W per channel
• Mineral Filled Polypropylene Cone
• Butyl Rubber Surround
• Silk Dome Tweeter
• Cast Alloy Frame
• Elevated Frame Cooling
• 4 ohms

JL Audio C5-570 {open box complete)

(450W Max) Evolution C5 Series 5" x 7" 2-Way Component Speaker System

DISCONTINUED

$599.99 (18.33% off)

JL Audio 6x8" Component Speakers Information

6x8 inch component speakers from JL Audio are an excellent choice for crystal clear music. Replace those factory speakers and quickly notice the difference in sound and quality of your music and audio. When you are ready for new 6x8" component speakers, think of JL Audio.
    clear all items