1. Home
    2. /
  2. Kenwood Store
    3. /
  3. Kenwood Car Audio & Electronics
    4. /
  4. Kenwood Car Subwoofers
    5. /
  5. Kenwood Car Subwoofer Bass Packages & Bundles

Kenwood Car Subwoofer Bass Packages & Bundles

filter-icon Filters & Sort

See what fits

car-icon
Filters
Kenwood ✕
Clear Filters
Reset Done
This value represents the number of speakers or subwoofers that the enclosure accommodates.
Refers to the diameter of the subwoofer, measured in inches.
Represents the style of the enclosure. Be sure to purchase the appropriate enclosure type and internal volume that will be compatible with your subwoofer's recommendation.

Sealed - Sealed boxes are those that have no holes or vents in it. The only hole in a sealed box is where the subwoofer is installed. Smaller sealed boxes require more power than a larger sealed box. They provide a tight, accurate bass, while the larger sealed enclosures provide a "boomier" and louder bass.

Ported / Vented - Ported/Vented Enclosures provide an even boomier, louder bass, but less accurate then a small, sealed box. Ported enclosures typically require more airspace per sub and also less power output from an amplifier to perform correctly.

Bandpass - Bandpass enclosures make subwoofers perform efficiently, but loose. The bass is not as "boomy" as a ported enclosure nor as punchy as a sealed enclosure. Bandpass enclosures work well with lower to mid-level subwoofers.
This is the total RMS power handling of all the subwoofers included in the package or enclosure.

If the loaded enclosure or amplifier and subwoofer package includes more than a single subwoofer, then this is the total RMS power handling for all of the subs combined.

The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend giving your subwoofer(s) 75% - 90% of the recommended RMS rating.
checkmarkIcon Select vehicle to make sure it fits.
Kenwood P-XW1241S + Kenwood Excelon X502-1

600W Max (300W RMS) Single 12” Pre-loaded Subwoofer Enclosure + 1000W Max X-Series 2-Ohm Stable "X series" Monoblock Amplifier

X502-1241S main
Go to item page
Kenwood P-XW1241S + Kenwood Excelon X502-1

600W Max (300W RMS) Single 12” Pre-loaded Subwoofer Enclosure + 1000W Max X-Series 2-Ohm Stable "X series" Monoblock Amplifier

• 600W Max (300W RMS) Pre-loaded 12" Vented Subwoofer Enclosure
• Polypropylene Cone with Diamond Array Pattern Woofer
• Enclosure Dimensions: 11-3/8” D x 20-7/8” W x 15-13/16" H
• 300 Watts RMS x 1 @ 4 ohms
• 500 Watts RMS x 1 @ 2 ohms
• Total Peak Power: 1000 Watts
• Variable low-pass filter: 50 - 200Hz, 24 dB/octave
• Variable Bass Boost: 0 to +18 dB bass boost at 40Hz
• Speaker-level (high-level) inputs

shipping truck icon
FREE 3-day shipping to VA. Get it Wed, Mar. 29

empty

List $550.00
$298.00

In stock

Only 2 Left!

Add to Cart

Item Added to Cart.

NVX SDTK20

Trunk Kit - 20 Square Feet of Sound Dampening Material (Five 18" x 32" Pieces)

$69.99

Add
View all Accessories Continue to cart
Kenwood eXcelon P-XRW1002WB + Kenwood Excelon X502-1

1300 Watts Single 2 Ohm 10" Pre-Loaded Sealed Wedge Enclosure + 1000W Max X-Series 2-Ohm Stable "X series" Monoblock Amplifier

P-XRW1002WB, X5021 main Out of stock
Go to item page
Kenwood eXcelon P-XRW1002WB + Kenwood Excelon X502-1

1300 Watts Single 2 Ohm 10" Pre-Loaded Sealed Wedge Enclosure + 1000W Max X-Series 2-Ohm Stable "X series" Monoblock Amplifier

• Peak Power: 1300 Watts
• RMS Power: 300 Watts
• Single 2 Ohm Voice Coil
• Stree Free Damper
• Rubber Magnet Cover

empty

List $580.00
$344.00
Add to Cart

• Peak Power: 1300 Watts
• RMS Power: 300 Watts
• Single 2 Ohm Voice Coil
• Stree Free Damper
• Rubber Magnet Cover

Item Added to Cart.

NVX SDTK20

Trunk Kit - 20 Square Feet of Sound Dampening Material (Five 18" x 32" Pieces)

$69.99

Add
View all Accessories Continue to cart
Kenwood P-XW1221SHP + Kenwood Excelon X502-1

1000W Max (500W RMS) 12” Pre-loaded High-Power Subwoofer Enclosure + 1000W Max X-Series 2-Ohm Stable "X series" Monoblock Amplifier

X502-1221SH main Out of stock
Go to item page
Kenwood P-XW1221SHP + Kenwood Excelon X502-1

1000W Max (500W RMS) 12” Pre-loaded High-Power Subwoofer Enclosure + 1000W Max X-Series 2-Ohm Stable "X series" Monoblock Amplifier

• 1000W Max (500W RMS) Pre-loaded 12" Vented Subwoofer Enclosure
• Polypropylene Cone with Dual Area Cap Woofers
• Enclosure Dimensions: 11-3/8” D x 20-7/8” W x 15-13/16” H
• 300 Watts RMS x 1 @ 4 ohms
• 500 Watts RMS x 1 @ 2 ohms
• Total Peak Power: 1000 Watts
• Variable low-pass filter: 50 - 200Hz, 24 dB/octave
• Variable Bass Boost: 0 to +18 dB bass boost at 40Hz
• Speaker-level (high-level) inputs

empty

List $600.00
$348.00
Notify Me

• 1000W Max (500W RMS) Pre-loaded 12" Vented Subwoofer Enclosure
• Polypropylene Cone with Dual Area Cap Woofers
• Enclosure Dimensions: 11-3/8” D x 20-7/8” W x 15-13/16” H
• 300 Watts RMS x 1 @ 4 ohms
• 500 Watts RMS x 1 @ 2 ohms
• Total Peak Power: 1000 Watts
• Variable low-pass filter: 50 - 200Hz, 24 dB/octave
• Variable Bass Boost: 0 to +18 dB bass boost at 40Hz
• Speaker-level (high-level) inputs

Item Added to Cart.

NVX SDTK20

Trunk Kit - 20 Square Feet of Sound Dampening Material (Five 18" x 32" Pieces)

$69.99

Add
View all Accessories Continue to cart
Kenwood eXcelon P-XRW1202WB + Kenwood Excelon X502-1

2000 Watts Single 2 Ohm 12" Pre-Loaded Subwoofer Sealed Wedge Enclosure + 1000W Max X-Series 2-Ohm Stable "X series" Monoblock Amplifier

P-XRW1202WB, X5021 main Out of stock
Go to item page
Kenwood eXcelon P-XRW1202WB + Kenwood Excelon X502-1

2000 Watts Single 2 Ohm 12" Pre-Loaded Subwoofer Sealed Wedge Enclosure + 1000W Max X-Series 2-Ohm Stable "X series" Monoblock Amplifier

• Peak Power: 2000 Watts
• RMS Power: 400 Watts
• Single 2 Ohm Voice Coil
• Stree Free Damper
• Rubber Magnet Cover

empty

List $600.00
$360.00
Add to Cart

• Peak Power: 2000 Watts
• RMS Power: 400 Watts
• Single 2 Ohm Voice Coil
• Stree Free Damper
• Rubber Magnet Cover

Item Added to Cart.

NVX SDTK20

Trunk Kit - 20 Square Feet of Sound Dampening Material (Five 18" x 32" Pieces)

$69.99

Add
View all Accessories Continue to cart
Kenwood P-XW1221SHP + Alpine MRVM500 Amplifiers + Belva 4 Gauge Amp Kit

1000W Max (500W RMS) 12” Pre-loaded High-Power Subwoofer Enclosure

P-XW1221SHP, MRVM500, BAK42 main Out of stock
Go to item page
Kenwood P-XW1221SHP + Alpine MRVM500 Amplifiers + Belva 4 Gauge Amp Kit

1000W Max (500W RMS) 12” Pre-loaded High-Power Subwoofer Enclosure

• 1000W Max (500W RMS) Pre-loaded 12" Vented Subwoofer Enclosure
• Polypropylene Cone with Dual Area Cap Woofers
Enclosure Dimensions: 11-3/8” D x 20-7/8” W x 15-13/16” H

Dollar Icon

VIP Product Get $41.51 in rewards to spend later

empty

63
List $589.99
$415.11
Notify Me

• 1000W Max (500W RMS) Pre-loaded 12" Vented Subwoofer Enclosure
• Polypropylene Cone with Dual Area Cap Woofers
Enclosure Dimensions: 11-3/8” D x 20-7/8” W x 15-13/16” H

Item Added to Cart.

50-pack of KN95 masks

Supreme and comfortable KN95 PFF2 Mask Respirators

$37.40

Add
NVX SDTK20

Trunk Kit - 20 Square Feet of Sound Dampening Material (Five 18" x 32" Pieces)

$69.99

Add
View all Accessories Continue to cart
Kenwood P-XW1221DHP + Kenwood Excelon X502-1

2000W Max (1000W RMS) Dual 12” Pre-loaded High-Power Subwoofer Enclosure + 1000W Max X-Series 2-Ohm Stable "X series" Monoblock Amplifier

X502-1221DH main Out of stock
Go to item page
Kenwood P-XW1221DHP + Kenwood Excelon X502-1

2000W Max (1000W RMS) Dual 12” Pre-loaded High-Power Subwoofer Enclosure + 1000W Max X-Series 2-Ohm Stable "X series" Monoblock Amplifier

• 1000 W RMS Dual 12" Vented Subwoofer Enclosure
• Polypropylene cone with "dual area" cap
• Single voice coil
• Enclosure Dimensions: 12-1/2" TD x 15-3/4" BD x 35-3/4" W x 15-7/8" H
• 300 Watts RMS x 1 @ 4 ohms
• 500 Watts RMS x 1 @ 2 ohms
• Total Peak Power: 1000 Watts
• Variable low-pass filter: 50 - 200Hz, 24 dB/octave
• Variable Bass Boost: 0 to +18 dB bass boost at 40Hz
• Speaker-level (high-level) inputs

empty

4
List $800.00
$498.00
Add to Cart

• 1000 W RMS Dual 12" Vented Subwoofer Enclosure
• Polypropylene cone with "dual area" cap
• Single voice coil
• Enclosure Dimensions: 12-1/2" TD x 15-3/4" BD x 35-3/4" W x 15-7/8" H
• 300 Watts RMS x 1 @ 4 ohms
• 500 Watts RMS x 1 @ 2 ohms
• Total Peak Power: 1000 Watts
• Variable low-pass filter: 50 - 200Hz, 24 dB/octave
• Variable Bass Boost: 0 to +18 dB bass boost at 40Hz
• Speaker-level (high-level) inputs

Item Added to Cart.

NVX SDTK20

Trunk Kit - 20 Square Feet of Sound Dampening Material (Five 18" x 32" Pieces)

$69.99

Add
View all Accessories Continue to cart
Kenwood P-XW1221D + Kenwood Excelon X502-1

1200W Max (600W RMS) Dual 12” Pre-loaded Ported Subwoofer Enclosure + 1000W Max X-Series 2-Ohm Stable "X series" Monoblock Amplifier

X502-1221D main Out of stock
Go to item page
Kenwood P-XW1221D + Kenwood Excelon X502-1

1200W Max (600W RMS) Dual 12” Pre-loaded Ported Subwoofer Enclosure + 1000W Max X-Series 2-Ohm Stable "X series" Monoblock Amplifier

• 1200W Max (600W RMS) Dual Pre-loaded 12" Vented Subwoofer Enclosure
• Polypropylene Cone with Diamond Array Pattern Woofer
• Enclosure Dimensions: 12-9/16” D x 35-3/4” W x 15-13/16” H
• 300 Watts RMS x 1 @ 4 ohms
• 500 Watts RMS x 1 @ 2 ohms
• Total Peak Power: 1000 Watts
• Variable low-pass filter: 50 - 200Hz, 24 dB/octave
• Variable Bass Boost: 0 to +18 dB bass boost at 40Hz
• Speaker-level (high-level) inputs

empty

1
List $700.00
$418.00
Add to Cart

• 1200W Max (600W RMS) Dual Pre-loaded 12" Vented Subwoofer Enclosure
• Polypropylene Cone with Diamond Array Pattern Woofer
• Enclosure Dimensions: 12-9/16” D x 35-3/4” W x 15-13/16” H
• 300 Watts RMS x 1 @ 4 ohms
• 500 Watts RMS x 1 @ 2 ohms
• Total Peak Power: 1000 Watts
• Variable low-pass filter: 50 - 200Hz, 24 dB/octave
• Variable Bass Boost: 0 to +18 dB bass boost at 40Hz
• Speaker-level (high-level) inputs

Item Added to Cart.

NVX SDTK20

Trunk Kit - 20 Square Feet of Sound Dampening Material (Five 18" x 32" Pieces)

$69.99

Add
View all Accessories Continue to cart
 
    clear all items
    why-shoping-with-sonic

    We love people and we're ready to help you! See what separates us from our competition.

    Take advantage of our VIP rewards like 10% back on your purchases, free 2-day shipping, extended warranties, and free returns! Gain access to all of these rewards without any membership fees.
    Get great discounted (and possibly FREE) installation accessories with most car stereo purchases. This includes dash kits, wiring harnesses and antenna adapters that you will need to properly install your new car stereo.
    We are an Authorized Dealer for all the brands we sell, including the most premium brands in car and marine audio such as Hertz, JL Audio, NVX, Rockford Fosgate, Kicker, Alpine, Kenwood and many more.
    Shop Deals and get up to 30% off premium brands! Shop Now! We are always looking out for the best products and deals to offer our customers. Don’t pay too much by shopping elsewhere!
    We have information on brands, gear, and more for you to explore! Check out our YouTube Channel for helpful how-to videos, product reviews, and Q&As. For a more detailed look, also visit our Learning Center!
    Our trained experts are here to assist you! They are just a phone call or click away to help you get the right gear for you and your vehicle!
    Why Shop With Us?

    Add vehicle

    Save up to 10 different vehicles in your garage

    2 | Make
    3 | Model
    Where to find vehicle info | Shop without vehicle

    Select Additional Details for or Change Vehicle

    Can't find your vehicle? Click here and we'll help.

    Find products that fit

    Find gear for your vehicle – fast.

    2 | Make
    3 | Model

    Additional information:

    Remove

    Can't find your vehicle? Click here and we'll help.

    Where to find vehicle info

    < Go to Fitment

    Didn't find your car?

    Submit your details and we'll help!
    Please enter the letters as they are shown in the image above. Letters are not case-sensitive.
    < Back
    Track order
    Call our experts
    Instagram Youtube