Stinger Ground Distribution Blocks at Sonic Electronix

Stinger Ground Distribution Blocks

Filters
Loading...
Filters
This specifies what the intended use of the distribution block is. Fused distribution blocks are intended to be used with the power wire and the fuse acts as a short-circuit or surge protection so your amplifier is not as likely to be damaged. Non-fused distribution blocks can used with ground or power wire connections, but the protection on power wire connections will not be present as there is no fuse in the distribution block. Therefore, we recommend your amplifier has an external fuse for short-circuit or surge protection. When using either type of distribution block, it is recommended to use a main fuse holder within 18 inches of the battery.
For accessories, this is the type of fuse that is required for the item to work properly.

For fuses, this is the type of fuse.

This is the number of fuses that the item requires to work properly.
This is the total number of input connections that go into the unit.
This is the largest gauge wire that will fit into the power and ground terminals of this device. The lower the gauge number, the thicker the wire is. For example, a 4 gauge wire is thicker than an 8 gauge wire and thus has higher current carrying capacity. Always do your best to get this size wire to reduce the risk of damage to your components.
This is the total number of output connections that the unit will produce.
This number refers to the maximum size of wire that will fit into the output connector(s) of the capacitor, battery terminal, or any other connector with an wire output.
listview icon
gridview icon
Stinger SHD20

Stinger SHD20 HPM Series Power or Ground Distribution Block with Satin Chrome Finish

SHD20 main
Go to item page

Stinger SHD20 HPM Series Power or Ground Distribution Block with Satin Chrome Finish

HPM Series Power or Ground Distribution Block • One 1/0 Gauge or 4 Gauge Input • Two 4/8 Gauge Outputs • Protective Cover Included • Corrosion Resistant Satin Chrome Finish

23
Stinger SHD20

Stinger SHD20 HPM Series Power or Ground Distribution Block with Satin Chrome Finish

In stock

$35.99 (63.91% off)
$12.99
Stinger SHD21

HPM Series Power or Ground Distribution Block with Satin Chrome Finish

SHD21 main
Go to item page

HPM Series Power or Ground Distribution Block with Satin Chrome Finish

• HPM Series Power or Ground Distribution Block
• Two 1/0 Gauge or 4 Gauge Inputs
• Four 4/8 Gauge Outputs
• Multiple Input/Output Design
• Protective Cover Included
• Corrosion Resistant Satin Chrome Finish

35
Stinger SHD21

HPM Series Power or Ground Distribution Block with Satin Chrome Finish

In stock

$42.99 (62.81% off)
$15.99
Stinger SPD515

Select Series Power Distribution Block (1/O Gauge Input and 4 Gauge Outputs)

SPD515 main
Go to item page

Select Series Power Distribution Block (1/O Gauge Input and 4 Gauge Outputs)

• Power Distribution Block
• 4 Gauge Outputs
• 1/0 Gauge Inputs

Stinger SPD515

Select Series Power Distribution Block (1/O Gauge Input and 4 Gauge Outputs)

In stock

Only 3 Left!

$33.99 (58.96% off)
$13.95
Stinger SSDB024

AGU Distribution Block (1)1/0 Ga Input (2) 4 Ga Output

SSDB024 main
Go to item page

AGU Distribution Block (1)1/0 Ga Input (2) 4 Ga Output

• Stinger Select Series
• 100% Brass Satin Finish
• Large Set Screws

Stinger SSDB024

AGU Distribution Block (1)1/0 Ga Input (2) 4 Ga Output

In stock

$25.99 (54.02% off)
$11.95
Stinger SPD513

PRO Series Power or Ground Distribution Block with ShocKrome Finish

SPD513 main
Go to item page

PRO Series Power or Ground Distribution Block with ShocKrome Finish

PRO Series Power or Ground Distribution Block • Two 4/8 Gauge Inputs • Four 8 Gauge Outputs • Multiple Input/Output Design • Protective Cover Included • Corrosion Resistant ShocKrome Finish

7
Stinger SPD513

PRO Series Power or Ground Distribution Block with ShocKrome Finish

In stock

Only 3 Left!

$31.95 (65.60% off)
$10.99
Stinger SPD510

PRO Series Power Distribution T-Block with Three 8 Gauge Inputs

SPD510 main
Go to item page

PRO Series Power Distribution T-Block with Three 8 Gauge Inputs

• PRO Series Power Distribution T-Block
• Three 8 Gauge Inputs/Outputs
• Daisy Chain Design
• Deep Wire Recesses
• Oversized Set Screws
• Corrosion Resistant ShocKrome-Plated
• Protective Cover Included

2
Stinger SPD510

PRO Series Power Distribution T-Block with Three 8 Gauge Inputs

In stock

$25.99 (61.56% off)
$9.99
Stinger SPT5212

1/0 Gauge to 5/16" PRO Classic Shoc-Krome Plated Ring Ground Terminal

SPT5212 main
Go to item page

1/0 Gauge to 5/16" PRO Classic Shoc-Krome Plated Ring Ground Terminal

• 1/0 Gauge To 5/16 Ring Ground Terminal
• Shoc-Krome Plated For Better Power Transfer
• Set Screw For Secure Grounding Of Wire

3
Stinger SPT5212

1/0 Gauge to 5/16" PRO Classic Shoc-Krome Plated Ring Ground Terminal

In stock

Only 3 Left!

$19.99 (25.01% off)
$14.99
Stinger SPT5104B

Pro Series 4 Gauge Input to 5/16" Black Ring Shoc-Krome - 25 Pack

SPT5104B main
Go to item page

Pro Series 4 Gauge Input to 5/16" Black Ring Shoc-Krome - 25 Pack

• Pro Series Ring Terminals
• 25 Pack
• 8 GAuge to 5/16"

Stinger SPT5104B

Pro Series 4 Gauge Input to 5/16" Black Ring Shoc-Krome - 25 Pack

In stock

Only 1 Left!

$55.99 (64.37% off)
$19.95
Stinger SSDB2034

Select Series (2) 1/0 Ga Input (3) 4 Ga Output Distrution Block

SSDB2034 main
Go to item page

Select Series (2) 1/0 Ga Input (3) 4 Ga Output Distrution Block

•Distribution Block
• 1/0 GA Input and 4 GA Output

Stinger SSDB2034

Select Series (2) 1/0 Ga Input (3) 4 Ga Output Distrution Block

In stock

$37.99 (47.38% off)
$19.99
Stinger SSDB448

Distribution Block 4 Ga/8 Ga - (1 Input, 4 Outputs)

SSDB448 main
Go to item page

Distribution Block 4 Ga/8 Ga - (1 Input, 4 Outputs)

• Distribution block
• Satin/Brass Construction
• Snap on Hardcover
• 4 Gauge In, 8 Gauge Output

Stinger SSDB448

Distribution Block 4 Ga/8 Ga - (1 Input, 4 Outputs)

In stock

Only 2 Left!

$24.99 (20.01% off)
$19.99
Stinger SSFDB428

Stinger Select Series 4 GA Input, 8 GA Output MIDI Distribution Block

SSFDB428 main
Go to item page

Stinger Select Series 4 GA Input, 8 GA Output MIDI Distribution Block

• Stinger Select Series
• 100% Brass Satin Finish
• Large Set Screws
• Corrosion Resistant

Stinger SSFDB428

Stinger Select Series 4 GA Input, 8 GA Output MIDI Distribution Block

In stock

Only 2 Left!

$39.99 (50.11% off)
$19.95
Stinger SSVLD48

VL Series 4 Gauge to 8 Gauge Distribution Block

SSVLD48 main
Go to item page

VL Series 4 Gauge to 8 Gauge Distribution Block

• Distribution Block
• 1 Input to 4 Output
• Satin Finish

Stinger SSVLD48

VL Series 4 Gauge to 8 Gauge Distribution Block

In stock

Only 1 Left!

$28.48 (33.32% off)
$18.99
Stinger SPD514

PRO Series Power or Ground Distribution Block with ShocKrome Finish

SPD514 main
Go to item page

PRO Series Power or Ground Distribution Block with ShocKrome Finish

• PRO Series Power or Ground Distribution Block
• Two 1/0 Gauge or 4 Gauge Inputs
• Four 4/8 Gauge Outputs
• Multiple Input/Output Design
• Protective Cover Included
• Corrosion Resistant ShocKrome Finish

10
Stinger SPD514

PRO Series Power or Ground Distribution Block with ShocKrome Finish

OUT OF STOCK

$29.95 (66.64% off)
$9.99
Stinger SPD511

PRO Series Power/Ground Distribution T-Block with Three 4 Gauge Inputs

SPD511 main
Go to item page

PRO Series Power/Ground Distribution T-Block with Three 4 Gauge Inputs

• PRO Series Power Distribution T-Block
• Three 4 Gauge Inputs/Outputs
• Daisy Chain Design
• Deep Wire Recesses
• Oversized Set Screws
• Corrosion Resistant ShocKrome-Plated
• Protective Cover Included

24
Stinger SPD511

PRO Series Power/Ground Distribution T-Block with Three 4 Gauge Inputs

OUT OF STOCK

$28.95 (65.49% off)
$9.99
Stinger SPD570

Power Ground Distribution Block - (4 Gauge Inputs, 8 Gauge Outputs)

SPD570 main
Go to item page

Power Ground Distribution Block - (4 Gauge Inputs, 8 Gauge Outputs)

• Power Distribution Block
• Shoc-Krome Plating

Stinger SPD570

Power Ground Distribution Block - (4 Gauge Inputs, 8 Gauge Outputs)

OUT OF STOCK

$56.99 (49.13% off)
$28.99
Stinger SPT5213

4 Gauge to 5/16" PRO Classic Shoc-Krome Plated Ring Ground Terminal

SPT5213 main
Go to item page

4 Gauge to 5/16" PRO Classic Shoc-Krome Plated Ring Ground Terminal

• 4 Gauge To 5/16 Ring Ground Terminal
• Shoc-Krome Plated For Better Power Transfer
• Set Screw For Secure Grounding Of Wire

1
Stinger SPT5213

4 Gauge to 5/16" PRO Classic Shoc-Krome Plated Ring Ground Terminal

OUT OF STOCK

$19.99 (45.02% off)
$10.99
    clear all items