Autotek Car Subwoofer Bass Packages & Bundles at Sonic Electronix

Autotek Car Subwoofer Bass Packages & Bundles

Filters
Why Shop With Us?
Loading...
Filters

An amplifier increases the power of the signal being fed to it by taking energy from its power supply and matching the signal but increasing its amplitude. Amplifiers use many different methods for converting these electrical signals and have been categorized into classes.

Class A/B: Greater than 50% of the input signal is amplified while the other percentage is “off”. These amplifiers have a small amount of current flowing through the output transistors all the time which almost eliminates crossover distortion. Class A/B has great sound quality but is not as efficient as class D. These amps are most commonly used to drive speakers.

Class D: Also known as switching amplifiers, class D amps have output transistors that are completely turned “on” or “off”. This means that when the transistors are on, there is almost no voltage across them but when they are off there is significant voltage but no current flowing through it which makes these amplifiers very efficient at the cost of sound quality. These amps are most commonly used to drive subwoofers.

Other Classes: You may see classes such as GH, bD, X, FD, etc. by some manufactures. These amplifiers tend to be either class A/B, D or a hybrid of the two but with improvements to their designs that can make them more efficient or offer better sound quality.

Each channel on an amplifier will power one speaker using a positive and negative cable. There are various types of amplifiers, each designed to power a certain number of speakers. Monoblock amplifiers, also known as single channel, are designed to power one or more subwoofers. These amplifiers often have very high power ratings. On the other hand, multi-channel amplifiers power multiple speakers, usually at lower power ratings. 2-Channel and 4-Channel amplifiers can power car speakers or low powered subwoofers. Occasionally you might see a 5 or 6-channel amplifier that can power speakers and subwoofers at the same time. The most common setup is a monoblock amp to run subwoofers and a 4-channel amp to run door speakers. Check out our Knowledge Base for more information.
listview icon
gridview icon
Autotek TA1250.2 Amplifier + (2) JBL 2 or 4 Ohm Selectable Subwoofers + Amp Kit

1200W Autotek 2-Channel Amplifier + (2) 10" JBL CLUBWS1000 Subwoofers + Belva Bak82bl (Blue)

(2) JBLCLUBWS1000BLK,BAK82,TA1250.2 main
Go to item page

1200W Autotek 2-Channel Amplifier + (2) 10" JBL CLUBWS1000 Subwoofers + Belva Bak82bl (Blue)

• 300 Watts Max x 2 @ 4 ohms
• 600 Watts Max x 2 @ 2 ohms
• 1200 Watts Max x 1 @ 4 ohm Bridged
• Total Peak Power: 1200 Watts
• Pro- Fi™ High Speed MOSFET power supply
• Variable high-pass filter: 120 - 3000 Hz, 12 dB/octave
• Variable low-pass filter: 50 - 250 Hz, 12 dB/octave
• Dimensions: 11.4"W x 12.7"L x 4"H

75
Autotek TA1250.2 Amplifier + (2) JBL 2 or 4 Ohm Selectable Subwoofers + Amp Kit

1200W Autotek 2-Channel Amplifier + (2) 10" JBL CLUBWS1000 Subwoofers + Belva Bak82bl (Blue)

OUT OF STOCK

$559.84 (44.62% off)
$310.03

Item Added to Cart

(2) JBLCLUBWS1000BLK,BAK82,TA1250.2 small

1200W Autotek 2-Channel Amplifier + (2) 10" JBL CLUBWS1000 Subwoofers + Belva Bak82bl (Blue)

$310.03

Keep Shopping

Belva BAK82

Complete 8 Gauge Amplifier Wiring Kit with 2-Channel RCA Interconnects

$29.99

Add
40 Square Feet of Sound Dampening Material

Thicker than the competition, complete sound damping kit for entire vehicle! Use for trunk, doors, roof and floor.

$109.99

Add
NVX XBG3PK 1/0 Gauge OFC Big 3 Upgrade Kit

Comes with everything you need to upgrade your power and ground wire.

$99.99

Add

Don't see the accessory you're looking for?
View all available accessories for the Autotek TA1250.2 Amplifier + (2) JBL 2 or 4 Ohm Selectable Subwoofers + Amp Kit.
    clear all items