Memphis Ground Distribution Blocks at Sonic Electronix

Memphis Ground Distribution Blocks

Filters
Loading...
Filters
This specifies what the intended use of the distribution block is. Fused distribution blocks are intended to be used with the power wire and the fuse acts as a short-circuit or surge protection so your amplifier is not as likely to be damaged. Non-fused distribution blocks can used with ground or power wire connections, but the protection on power wire connections will not be present as there is no fuse in the distribution block. Therefore, we recommend your amplifier has an external fuse for short-circuit or surge protection. When using either type of distribution block, it is recommended to use a main fuse holder within 18 inches of the battery.
This is the number of fuses that the item requires to work properly.
This is the total number of input connections that go into the unit.
This is the largest gauge wire that will fit into the power and ground terminals of this device. The lower the gauge number, the thicker the wire is. For example, a 4 gauge wire is thicker than an 8 gauge wire and thus has higher current carrying capacity. Always do your best to get this size wire to reduce the risk of damage to your components.
This is the total number of output connections that the unit will produce.
This number refers to the maximum size of wire that will fit into the output connector(s) of the capacitor, battery terminal, or any other connector with an wire output.
listview icon
gridview icon
Memphis DBLOCK

DIistribution block with 3-0 AWG inputs, 4-4AWG outputs.

DBLOCK main
Go to item page

DIistribution block with 3-0 AWG inputs, 4-4AWG outputs.

• Nickel plated brass for better current transfer
• Sturdy screw-in terminals
• 3-0 gauge inputs / 4 4 gauge outputs
• Heavy duty plastic protective cover
• Adjustable aluminum M-Logo badge

Memphis DBLOCK

DIistribution block with 3-0 AWG inputs, 4-4AWG outputs.

Special order

Ships at Later Date

 
$24.95
    clear all items