Belva 10" Angled & Truck Subwoofer Boxes at Sonic Electronix

Belva 10" Angled & Truck Subwoofer Boxes

10" angled and truck subwoofer boxes from Belva are made to fit your truck seamlessly and easily.
Filters
Loading...
Filters
This value represents the number of speakers or subwoofers that the enclosure accommodates.
Represents the style of the enclosure. Be sure to purchase the appropriate enclosure type and internal volume that will be compatible with your subwoofer's recommendation.

Sealed - Sealed boxes are those that have no holes or vents in it. The only hole in a sealed box is where the subwoofer is installed. Smaller sealed boxes require more power than a larger sealed box. They provide a tight, accurate bass, while the larger sealed enclosures provide a "boomier" and louder bass.

Ported / Vented - Ported/Vented Enclosures provide an even boomier, louder bass, but less accurate then a small, sealed box. Ported enclosures typically require more airspace per sub and also less power output from an amplifier to perform correctly.

Bandpass - Bandpass enclosures make subwoofers perform efficiently, but loose. The bass is not as "boomy" as a ported enclosure nor as punchy as a sealed enclosure. Bandpass enclosures work well with lower to mid-level subwoofers.
Refers to the diameter of the subwoofer, measured in inches.
This is the shape of the enclosures cutout hole and defines the style of subwoofer that can be installed.
The color of the enclosure's exterior/outer finish.
The internal volume measurement in cubic feet before subwoofer magnet displacement.
The box style or shape refers to the actual shape of the box. Square and rectangular boxes are straight-edged boxes on all sides, whereas hatchback and truck style enclosures feature an angled front or back design that allows for installation in places short on depth such as single cab pickup trucks. You can also use such enclosures in hatchback cars or other vehicles where space is a premium. Tube and cylinder shaped boxes were made popular by Bazooka and are a great option for those looking for a nice amount of bass without sacrificing lots of space. They may even fit in locations that slim truck boxes cannot fit in. If the enclosure is vehicle specific, we encourage you to read the product description to find out which vehicles the enclosure is made for.
listview icon
gridview icon
Belva Single 10" Subwoofer Angled Truck or Hatchback Box Enclosure (1TRUCK10)

10ANTCM - CARB Compliant, 5/8" MDF Shallow Sub Enclosure Lined with Polyfil

1TRUCK10 main
Go to item page

10ANTCM - CARB Compliant, 5/8" MDF Shallow Sub Enclosure Lined with Polyfil

• 5/8" MDF (Medium Density Fiberboard)
• Perfect for tight spaces (trucks/hatchbacks)
• fits most 10" subwoofers
• fully carpeted
• fully caulked and sealed tight

51
Belva Single 10" Subwoofer Angled Truck or Hatchback Box Enclosure (1TRUCK10)

10ANTCM - CARB Compliant, 5/8" MDF Shallow Sub Enclosure Lined with Polyfil

In stock

$49.99 (0.08% off)
$49.95
Hide info
More info Item page
1 Special offer
  • 25% Off Sealed Truck Enclosure with Your Subwoofer Purchase!

Item Added to Cart

1TRUCK10 small

10ANTCM - CARB Compliant, 5/8" MDF Shallow Sub Enclosure Lined with Polyfil

$49.95

Keep Shopping

NVX XKIT42 - 4 Gauge Amp Kit

Pure Virgin Copper, 4 Gauge Amplifier Installation Kit

$99.99

Add
NVX SDRLR1 Universal Roller Tool

Install your sound damping with the SDRLR1 tool

$7.99

Add
Banana Clip Terminals

These high grade banana clips allow you to plug into your banana clip ready terminal for a secure connection.

$2.99

Add

Don't see the accessory you're looking for?
View all available accessories for the Belva Single 10" Subwoofer Angled Truck or Hatchback Box Enclosure (1TRUCK10).
Belva Single 10" Subwoofer Angled Truck or Hatchback Box Enclosure (1TRUCK10) - Open Box, Very Good Condition (Used)

10ANTCM - CARB Compliant, 5/8" MDF Shallow Sub Enclosure Lined with Polyfil - Open Box, Very Good Condition (Used)

1TRUCK10 main
Go to item page

10ANTCM - CARB Compliant, 5/8" MDF Shallow Sub Enclosure Lined with Polyfil - Open Box, Very Good Condition (Used)

• 5/8" MDF (Medium Density Fiberboard)
• Perfect for tight spaces (trucks/hatchbacks)
• fits most 10" subwoofers
• fully carpeted
• fully caulked and sealed tight

Belva Single 10" Subwoofer Angled Truck or Hatchback Box Enclosure (1TRUCK10) - Open Box, Very Good Condition (Used)

10ANTCM - CARB Compliant, 5/8" MDF Shallow Sub Enclosure Lined with Polyfil - Open Box, Very Good Condition (Used)

In stock

Only 1 Left!

$49.99 (60.01% off)
$19.99

Item Added to Cart

1TRUCK10 small

10ANTCM - CARB Compliant, 5/8" MDF Shallow Sub Enclosure Lined with Polyfil - Open Box, Very Good Condition (Used)

$19.99

Keep Shopping

NVX XKIT42 - 4 Gauge Amp Kit

Pure Virgin Copper, 4 Gauge Amplifier Installation Kit

$99.99

Add
NVX SDRLR1 Universal Roller Tool

Install your sound damping with the SDRLR1 tool

$7.99

Add
Banana Clip Terminals

These high grade banana clips allow you to plug into your banana clip ready terminal for a secure connection.

$2.99

Add

Don't see the accessory you're looking for?
View all available accessories for the Belva Single 10" Subwoofer Angled Truck or Hatchback Box Enclosure (1TRUCK10) - Open Box, Very Good Condition (Used).
Single10" Sub Angled Truck orHatchback Enclosure - Open Box, Good Condition Used

10ANTCM - CARB Compliant, 5/8" MDF Shallow Sub Enclosure Lined with Polyfil

1TRUCK10 main
Go to item page

10ANTCM - CARB Compliant, 5/8" MDF Shallow Sub Enclosure Lined with Polyfil

• 5/8" MDF (Medium Density Fiberboard)
• Perfect for tight spaces (trucks/hatchbacks)
• fits most 10" subwoofers
• fully carpeted
• fully caulked and sealed tight

Single10" Sub Angled Truck orHatchback Enclosure - Open Box, Good Condition Used

10ANTCM - CARB Compliant, 5/8" MDF Shallow Sub Enclosure Lined with Polyfil

OUT OF STOCK

$49.99 (58.01% off)
$20.99

Item Added to Cart

1TRUCK10 small

10ANTCM - CARB Compliant, 5/8" MDF Shallow Sub Enclosure Lined with Polyfil

$20.99

Keep Shopping

NVX XKIT42 - 4 Gauge Amp Kit

Pure Virgin Copper, 4 Gauge Amplifier Installation Kit

$99.99

Add
NVX SDRLR1 Universal Roller Tool

Install your sound damping with the SDRLR1 tool

$7.99

Add
Banana Clip Terminals

These high grade banana clips allow you to plug into your banana clip ready terminal for a secure connection.

$2.99

Add

Don't see the accessory you're looking for?
View all available accessories for the Single10" Sub Angled Truck orHatchback Enclosure - Open Box, Good Condition Used.

Belva 10" Angled & Truck Subwoofer Boxes Information

10 inch angled and truck subwoofer boxes by Belva are an excellent choice when space is a premium. Built to fit in tighter spaces, these boxes still provide the sound and performance you would expect. Belva is a leader in 10" angled and truck subwoofer boxes.
    clear all items