Find car audio that fits your 2020 Toyota RAV4 Hybrid

---

• Speaker bracket plate for select 1998-2023 vehicles from Toyota, Subaru, Scion
• For the installation of 6.5” to 6.75” speakers
• Works with all speakers including component drivers

• Antenna adapter for select 2006-2025 vehicles from Toyota, Subaru, Lexus
• Use for replacing vehicle radio
• Male Motorola connector on one end
• Female Molex connector on other end

• Plug and Play Design (No cutting or splicing)
• Provides 12-volt 500-mA remote wire
• Includes gain level controller to adjust the overall output
• Designed to provide 2-channels of low-level audio

• USB adapter for select 2018-2025 vehicles from Toyota
• Retains vehicle's factory USB port
• Connects factory USB port on aftermarket stereos

• Compatible with select 2018-2025 vehicles from Toyota, Lexus Push-to-Start Vehicles
• Not compatible with Key-to-Start Ignition
• Plug and play installation
• No wires to cut or splice
• Includes two long range remotes that work up to 2000 feet away
• Programmer included

• Direct Connection to the factory harness
• Color coded wires for easy installation
• No cutting or splicing required

• Retains the factory USB port
• Direct Connection to the factory harness

• Amplifier replacement harness for select 2012-2025 vehicles from Subaru, Toyota, Lexus
• Maestro AR module required
• Includes harnesses needed to install Maestro AR module
• Plug-n-play, easy installation

• Double-DIN Dash Kit
• Painted scratch-resistant gloss black
• High-Grade ABS plastic construction
• Original factory-like fit and finish
• Includes installation instructions

• Allows addition of aftermarket backup camera to OEM Screens
• Compatible with Toyota Touch and Touch 2 head units

• Amplifier replacement extension harness
• 2-meter extension harness to relocate Maestro AR or amplifier
• Ideal for location without enough space for amp/DSP
• Requires vehicle specific T-harness to work

• Designed for wiring of steering wheel control interface of [[!afgDescLink]]
• 12 volts / 10 amps accessory power
• Provides parking brake, reverse and speed sense navigational outputs

• Provides 12-Volt accessory power (RAP)
• Designed for non-amplified and amplified models
• Micro-B USB Updatable
• Pre-programmed to retain Steering Wheel Controls
• Color coded wires for easy installation
• No cutting or splicing required

• Provides 12-Volt accessory power (RAP)
• Compatible with amplified and non-amplified audio systems
• Micro-B USB Updatable
• Includes Bass knob
• Pre-Wired for ASWC-1 (Sold separately)

• Provides 12-Volt accessory power (RAP)
• Designed for non-amplified audio systems
• Micro-B USB Updatable
• Pre-Wired for ASWC-1 (Sold separately)

• Provides 12-Volt accessory power (RAP)
• Designed for non-amplified and amplified models
• Pre-programmed to retain Steering Wheel Controls
• Micro-B USB Updatable
• Color coded wires for easy installation
• No cutting or splicing required

• Amplifier integration interface for select 2016-2023 vehicles from Toyota
• Enables to add aftermarket amplifiers to OEM source units
• Includes external bass knob
• Provides 6 channels of 5-volt RMS audio
• Designed for amplified vehicles
• Plug-n-play installation

• 300 watts Peak Each, 100 watts RMS Each
• 1/2" PEI (Polyetherimide) Balanced Dome zero-protrusion tweeters with neodymium magnets
• Polypropylene cone material with Extended Voice Coil (EVC) technology
• Impedance: 4 ohm
• Sensitivity: 90 dB

• 90 watts Peak Each, 45 watts RMS Each
• 1/2" Piezo pole-mounted Silk Dome tweeters
• Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 91 dB

• 180 watts Peak Each, 60 watts RMS Each
• 1/2" PEI (Polyetherimide) Dome Tweeters
• Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 91 dB