200W RMS 6.5" DB+ Series 2-way Marine/UTV Certified Coaxial Speakers with 6" x 9" Speaker Adapters
• 300 Watts Max Each, 100 Watts RMS Each
• 0.75" shallow tweeter design
• Polypropylene UV tolerant cone
• 4 Ohms Impedance
• Sensitivity: 92dB
•5 1/4" / 6-1/2 Component/Coaxial Speaker to 6" x 9" Adapter
Polk Audio DB652 DB+ 6.5-inch (DB 652)
600W Peak (200W RMS) 6.5" DB+ Series 2-way Car & Marine Coaxial Speakers
Quantity: 1
Priced Per Pair
Priced Per Pair
Important Note: Brackets are intended for custom installs and may require some modifications to fit a given speaker and/or location. For example, Most 6.5" will fit, but given the narrow opening to accommodate a 5.25" speaker, the bracket may require said modification. Please plan accordingly and/or consult with your installer.
Internal Product ID:
133571
Not worth it
I had to cut out for the tweeter to fit and since the speakers I purchased could not be deck mounted, I had to cut the speaker hole larger as well so the speaker cone would not be obstructed. For the amount of cutting I had to do, I would just as soon make one from scratch out of 1/4" hardboard.
76
found this helpful.Great adapters.
Great for any component set just apply some baffles and you'll have great sound quality.
73
found this helpful.Perfect for me
These worked great and even take the 6-3/4 components.. glad they were so pocket friendly
75
found this helpful.great fit
these fit with no issues or concerns, great product quality!
61
found this helpful.Metra Speaker Mounting Adapters...worked
This product worked as advertised and was well worth the money.
62
found this helpful.awsome product, Great Seller !!!
Product is very well made, durable and does the trick !!! Sellers were awesome to deal with, NO hassels and super quick shipping !!! A++++, will buy again :)
59
found this helpful.Nice speakers
Great sounding speakers
59
found this helpful.Good value
Used these in the rear of my car so I could install 6.75" separates instead of 6x9's. Great functionality but the concentric knock outs for the tweeters were problematic and the plate could be stiffer. I would use these again.
56
found this helpful.Worked well, However.....
The instructions described enlarging the mounting holes via an exacto or snap knife, which did not work. I had to use a jigsaw (fine tooth metal blade,) & smoothed the edges with a Dremel.
The installation worked.... But:
I actually thought of taking my finished project to a metal shop to fabricate a flat, sheet metal version, which would be a lot more secure & sound a whole lot better
56
found this helpful.Great product with a little modification
After a little bit of trimming and adding some Dynamat the bracket it worked perfectly to adapt a 6.5 speaker to a 6x9 space in a 2008 Nissan Rogue.
57
found this helpful.Best selling similar products