• Sensitivity: 84.07 dB
• Mounting depth: 4.90 "
• Mineral-Filled Polypropylene Cone
• Large Roll Surround
• Elevated Frame Cooling
• DMA Optimized Motor System
• Metallic Silver Frame Finish • 10" Sealed Enclosure
• 3/4" Medium Density Fiberboard Construction
• Durable Black Carpeting
• Pre-Lined with Poly-Fil
The W0v3 offers superb excursion capability, linearity and an overall performance output that puts it right at the top of its price class. The driver features a very beefy 2.0-inch diameter voice coil, a DMA-optimized motor system and JL Audio's patented Elevated Frame Cooling design - all purpose-engineered for enhanced power handling and reliability. What this also means, is your system will be immediately injected with the increase in output and better sound fidelity that one expects from a JL Audio product. In addition, excellent excursion capability and linearity allow it to reproduce sub-bass with striking extension and quality. When matched up with the proper power source, signal and setup the W0v3 is capable of a well rounded sound that is unparalleled by any other driver in its price range.
The 10W0v3 Subwoofer can be driven with as little as 75 Watts. However, for best audio performance it is recommended to run an amplifier capable of between 200 - 300 Watts of continuous power per driver, like the JL Audio XD300/1v2 or JL Audio JX500/1D. In addition, these subwoofers are optimized to operate in either a ported or sealed enclosure, needing only 0.65 cubic feet of air space in a sealed box and 1.125 cubic feet in a ported/vented enclosure. (Specific dimensions and figures can be found in the user manual, linked further below.)
DMA is JL Audio’s proprietary Dynamic Motor Analysis system and is aimed at delivering superior dynamic stability and low distortion. As a result of DMA optimization, W0v3 motors remain linear in motor force over an extreme range of excursion and also maintain a highly stable fixed magnetic field in the gap over a wide power range. This leads to tight, clean, articulate bass that also allows for extreme linear excursion, phenomenal power handling and control, control, control.
JL Model Comparison
|Model||RMS Power||Cone Material||Surround Material||Sensitivity (dB)||Frequency Response||Xmax (mm||Terminals||Made In America|
|W7 Series||500-1500 Watts||Polypropylene||Foam Overroll||82.7 - 86.3||15-250 Hz||19-32||Push Terminals|
|W6 Series||600 Watts||Polypropylene||Rubber||82.7 - 85.4||20-200 Hz||19||Push Terminals|
|W3 Series||150-600 Watts||Polypropylene||Rubber||80.5-87.90||20-250 Hz||8.89-15.5||Push Terminals|
|W1 Series||150-300 Watts||Polypropylene||Rubber||83.9-86.1||22-200||8-11||Push Terminals|
|W0 Series||300-500 Watts||Polypropylene||Foam||84-88.20||20-250 Hz||11.4-12.7||Push Terminals|
|WX Series||200 Watts||Polypropylene||Foam||86-87.17||22-250 Hz||10||Spade Terminals|
Single 10" Sealed MDF Subwoofer Enclosure (Belva MDFS10)
10-inch Sealed Car Sub Box Made with 3/4" MDF and lined w/ Polyfil (0.77 cu ft airspace 10SQTC)
You've got an awesome subwoofer there, pal. But where's it gonna go? You can't just throw that thing in the trunk and call it a day. Don't worry, Belva's got your back. With superior construction, great features and everything you need for bass, you'll be ready to pass up that entry-level box you've been eyeballing.
You get quality boxes with solid 3/4" MDF because nothing else will do the job right. You want to flex your windshield, not your box's innards. You get polyfill built into the box, making sure your subs perform perfectly. On top of that, you get a box that's CARB Phase 2 Compliant, meaning your box won't emit as much nasty formaldehyde as the competition. Better for your bass and better for you.
Look, nobody buys a subwoofer and says, 'Aw man, I just want a teeny bit of thump.' Naw man, you want something that kicks you in the chest, but you need a box that's gonna put up with it. That's where Belva comes in. While other brands use less-than-optimal 1/2-inch MDF, we've got 3/4-inch MDF to make sure you get all the bass you can handle. Why risk a busted box? Belva's the obvious choice when it comes to giving your sub a good home and giving you the low end you're looking for.
(newest, current model)
(previous model, replaced by JL Audio 10W0v3-4 Subwoofer + Free MDFS10 Sealed Box)
This item is currently not eligible for our low price guarantee. This may be due to supply constraints, manufacturer restrictions, or another reason. We're always here to help you get the best price possible so give us a call or email today. Our experts will do their best to build the system that works for you within the rules.
Overall rating distribution
By feature average rating
October 6, 2010
Decent Small Box
For the money it is a pretty good product. The carpet is a nice black. Very dark and very clean. The box is solid and can take a beating. The terminal cup is nice as its a binding post and not those crappy pressure tabs. Good box, decent sealing, good carpet.
October 25, 2012
Quality at a great price
I got this box for an Earthquake dbxi10 and thankfully the sub fit right in despite me thinking the measurements for the cutout were a bit off. The little bit of polyfill lining is a nice touch. The box felt secure and solid with a good bit of weight for the quality of wood. It definitely didn't feel like a cheap particle board box. The carpeting was on snug and looked good as well. Great pre-fab box for your sub. I expect it to last but can't say for sure as I just got it in recently.
December 11, 2014
Not much can really be said about a sub enclosure, other than it does its job well. My Rockford Fosgate P1S2-10 fit in snuggly. The only thing that was a tad iffy was that when drilling once the bit went through it would catch of the inside insulation and mess it up, but quite honestly it didn't really bother me at all. Good enclosure.
This product is temporarily out of stock. May we recommend...
• 7" LCD Display
• Compatible with Apple CarPlay & Android Auto
• Built-in Bluetooth
• 7 EQ Presets
• 10-Band EQ
• Backup Camera Input
• Detachable Face
• 50W x 4 Chan. Peak
• 18W x 4 Chan. RMS
• Pandora iPhone App Control
• 3 Sets of 4V Preamp Outputs
• Single USB Input
• White LCD Text Display
• Premium Audio/Video (AV) System (No CD/DVD)
• Unique ultra-shallow installation
• Two-finger swipe user interface
• Works with Apple CarPlay® and Android Auto™
• Compatible with Google Assistant
• PowerStack Capability
• Built-in Bluetooth Hands-free
• Mechless AM/FM receiver with Bluetooth Connectivity
• Front 3.5mm aux input
• Front panel USB 1A charging port
• 2-band EQ & 4 preset EQ
• 1 pair of 2V RCA preamp outputs
• 80w x 4 Chan. Max
• 17W x 4 Chan. RMS
• 3 Sets of Preamp Outputs
• Equalizer With Selectable Presets
• Backup Camera Included
• Bluetooth Connectivity
Internal Product ID: