1. Home
    2. /
  2. Specials & Promotions
    3. /
  3. Current Deals and Promotions
    4. /
  4. Speakers with Sound Deadening
    5. /
  5. Polk Audio SDRLR1,SDSK2,MM 6502

Polk MM6502 MM1 with Speaker Installation Kit

750W Peak (250W RMS) 6.5" 2-Way Component Car Speakers with Sound Dampening and Application Roller

184
Polk Audio
Shop all Polk Audio
EXCLUSIVE
highlight-star-icon

• 375 Watts Max Each Side, 125 Watts RMS Each Side
• 1", Terylene Fabric Tweeter
• 6.5" Titanium-Plated Polymer Midwoofer Cone
• 4 Ohms Impedance
• Sensitivity: 93 dB
• Mounting Depth: 2.62"

Learn more about the mm6502_sdsk2_sdrlr1

We apologize

This item has been discontinued

Show me more products from this category
Go to Category

Description

Polk Audio

Authorized dealer

Polk
MM1 Series Speakers

Polk MM6502

Polk MM6502 Two-Way Component System

It doesn't matter whether your next destination is the road, the lake, the trails or the dunes. Polk's MM1 series speakers are built to not only withstand whatever environment they're thrown into, but to make your ears happy through all of it. This 6.5" component system will deliver more sonic happiness than you ever thought was possible, especially if factory is all you've ever had.

Polk MM6502 Two-Way Components

Polk's Mobile Monitor speakers are rugged and built for all kinds of outdoor settings. The IP56 ultra marine certification means all parts - the surround, the cone, the basket and everything else - can withstand dirt, dust and water without any serious side effects. No matter what vehicle these components call home, they're more than ready for the ride.

Built for your boat, ATV or anything else designed for exposure to the elements, these speakers are perfect for every ride. Add in a non-corrosive fiberglass reinforced ABS basket, quality materials in the midwoofers and rugged 1" tweeters, and these MM1s are ready for the long haul, wherever that haul happens to go.

Polk MM6502 Two-Way Components

Not looking for outdoor adventure? These MM1 speakers are still built to outperform your factory drivers in your daily vehicle. These robust crossovers with selectable crossover points elevate your sound while giving you more control over it. Built-in Dynamic Balance Technology helps eradicate distortion and enrich the tone.

Don't put off that sound upgrade any longer. Polk's MM 6502 components take care of everything you didn't even know was missing from your sound. Reach new sonic heights with the premium upgrade your ride deserves. Drop this component set in your cart, install them in your vehicle and be prepared for your next adventure.

Polk Audio MM6502

750W Peak (250W RMS) 6.5" Mobile Monitor Series 2-Way Car & Marine Component Speaker System
Quantity: 1

Product Details:

  • 6-1/2" Polk Audio MM1 Series 2-way Component System Car Speakers
  • Power Handling:
    • Peak: 750 watts per set / 375 watts each side
    • RMS: 250 watts per set / 125 watts each side
  • Titanium Coated Composite cone material
  • Santoprene Rubber speaker surround
  • 1" Terylene Dome Tweeters
  • Glass fiber formers and oversized voice coils
  • Premium crossovers
  • Neodymium magnet motor structure
  • Top-mount Depth: 2.62"
  • Cutout Dimensions: 5"
  • Impedance: 4 ohms
  • Frequency Response: 35 - 40000 Hz
  • Sensitivity: 93 dB
  • Premium non corrosive aluminum grilles included
  • Authorized Internet Dealer
  • 1-year Sonic Electronix Warranty

    • Priced Per Complete Component System: 2 midwoofers, 2 tweeters and 2 crossover networks.

NVX SDSK2 - 90mil 2.3mm THICK

Speaker Kit - 1.38 Square Feet of Sound Damping (Sound Deadening) Material (Two 10" x 10" Pieces)
Quantity: 1

Product Features

  • Two 10" x 10" Pieces of Sound Dampening Material
    • 90.55mil thick (2.3mm)! There are cheaper, inferior solutions at 50-80mil, but we do not recommend that thin of a solution as it will not perform as well.
  • Great sound damping for installing with car door speakers
  • 1.38 Square feet total
  • Made from 100% Butyl Rubber
  • Eliminates road noise
  • Quiets vibrations
  • Increases sound quality and output of car audio system
  • Stops rattles
  • Increases SPL
  • Reduces heat
  • Easy to form aluminum conforms to desired area of vehicle with ease
  • Four step peel and stick design for easy installation
  • Up to 30% thicker than the leading competitors
  • Dimensions (each piece): 10"L x 10"W
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty


NVX SDRLR1 Sound Dampening Rubber Roller

Universal, Professional Heavy Duty Roller for Sound Damping (Sound Deadening)
Quantity: 1

General Features

  • Universal - works with NVX and other brands
  • Professional, Heavy Duty Roller Tool (used at car stereo shops worldwide)
  • 2" Solid Rubber Roller
  • Contoured wood-grip handle for comfortable handling
  • Soft Urethane Rubber Won't Scratch Surfaces
  • Thick Plated Steel Frame
  • Sturdy wood and metal construction for durability
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty


Specifications & Details

Speaker Specifications
Series
Polk Audio MM1 Series
Priced Per
Pair
Speaker Size
6-1/2"
Design
2-way Component System
Tweeter Design
Dome
Tweeter Size
1"
Tweeter Composition
Terylene
Woofer Composition
Titanium Coated Composite
Woofer Surround
Santoprene Rubber
Peak Power Handling
375 watts
RMS Power Handling
125 watts
Total RMS Per Pair/Set
750 watts
Total RMS Per Pair/Set
250 watts
Sensitivity
93 dB
Frequency Response
35 - 40000 Hz
Impedance (Per Voice Coil)
4 ohms
Shallow Mount Installation
No
Magnet Type
Neodymium
Top-Mount Depth (Mounting Depth)
2.62"
Bottom-Mount Depth
2.86"
Cutout Dimensions
5"
Number of Speakers
2 Woofers + 2 Tweeters
CTA-2031 Compliant
No
General specifications
Marine Certified
Yes
Hi-Res Certified
No
Color
Black
Speaker Grilles
Yes
Includes Damping Kit
What is in the box?
Paperwork
User manual
Warranty/Registration card
WITB: Speakers
Mounting Brackets/Hardware
Speakers (2)
Grilles (2, attached)
Tweeters (2)
Tweeter flush mounts (2)
Tweeter surface mounts (2)
Crossover networks (2)
Mounting screws (8)
Mounting clips (8)
Speaker connection cables (2)
Adhesive brand badges
Other Accessory #6
Warranty and Return Policy
Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Item Details

Manufacturer:

Polk Audio

Model Number:

SDRLR1,SDSK2,MM 6502

Weight:

4.90lbs

Internal SKU:

mm6502_sdsk2_sdrlr1

Internal Product ID:

136239

Customer Ratings & Reviews

Polk MM6502 MM1 with Speaker Installation Kit
184
Rate or review product
5 star
80%
4 star
15%
3 star
3%
2 star
1%
1 star
1%
Durability
4.7
Value
4.8
Features
4.6
Design
4.7
Usability
4.8
Sort by:
Loading...

good stuff

The following review is for SDSK2, which is a part of the bundle you are viewing.

I got this free when i ordered my 4x6 speakers i installed it on the rear set no space in the front openings so far so good still sticking to the metal and no rattles.

By MIGUEL on January 20, 2014

113

found this helpful.
Helpful? Report abuse

Nice Wiring Kit

The following review is for SDSK2, which is a part of the bundle you are viewing.

This is a nice quality kit at a fair price. It had everything that was needed to complete the task.

I had purchased another kit that I really wasn't happy with, and decided to purchase this one. I liked the attention to detail in the preparation of this kit. Recommended.

By Mr Sparkie on September 20, 2014

106

found this helpful.
Helpful? Report abuse

value

The following review is for SDRLR1, which is a part of the bundle you are viewing.

I hear a roller is a must have for applying dampening, for the price its worth ordering.

By ERIC on January 6, 2014

107

found this helpful.
Helpful? Report abuse

Good and cheap

The following review is for SDRLR1, which is a part of the bundle you are viewing.

Good product, easy to use and durable. Very helpful in installing sound dampener. It's also cheap for a proper rubber roller.

By Sam on September 22, 2013

105

found this helpful.
Helpful? Report abuse

Why pay more?

The following review is for SDRLR1, which is a part of the bundle you are viewing.

This roller is more than capable of getting the job done. One trick you can do for tight curves is to use the handle of the roller to get the dampening material to conform to them.

All in all, a roller is roller. So, why pay more than this?

By ACLJavi on July 23, 2014

98

found this helpful.
Helpful? Report abuse

Works pretty good

The following review is for SDSK2, which is a part of the bundle you are viewing.

I bought this product for my trucks doors, and I noticed it's thicker than other sound dampening material I've used before that I paid a lot more for. This is a great product at a great price

By Zach on March 9, 2014

101

found this helpful.
Helpful? Report abuse

NVX Sound Dampening Roller

The following review is for SDRLR1, which is a part of the bundle you are viewing.

Amazing roller gets the job done well. Seems like everytime i got into little spaces that i couldnt use the roller I cut my hands up this roller saves your hands and saves time. I did have the nut that holds the roller on come off while using it but its easy to put back on, I put it back on by hand. Worth the money for sure.

By Brendan on March 18, 2013

98

found this helpful.
Helpful? Report abuse

HIGH QUALITY

The following review is for SDSK2, which is a part of the bundle you are viewing.

EASY TO CUT TO THE SIZE YOU NEED, DOES A GREAT JOB AT MINIMIZING VIBRATIONS

By RANDALL on February 24, 2014

95

found this helpful.
Helpful? Report abuse

Easy to use, good performance!

The following review is for SDSK2, which is a part of the bundle you are viewing.

We used this in conjunction with a component speaker upgrade to a 2003 VW Passat. This material is simple to use (if you can work scissors and peel off adhesive backing, you can handle this stuff!), and you can easily cut it to any size or shape to fit your particular vehicle. Installing this material was the easiest part of our whole car audio upgrade project!

By Tom on June 20, 2013

92

found this helpful.
Helpful? Report abuse

sound deadener

The following review is for SDSK2, which is a part of the bundle you are viewing.

Amazing stuff I wish I could afford to cover my whole truck with it!

By Kent on September 28, 2012

93

found this helpful.
Helpful? Report abuse
See all 184 reviews

Add-ons

133805
NVX SDSK2 Speaker Kit

Eliminates speaker panel distortion and reduces vibration, rattles, and squeaks!

$14.99

40527
Speaker Kit - 1.38 Square Feet of Sound Damping

Speaker Kit - 1.38 Square Feet of Sound Damping

$14.99

40529
NVX SDDK12 Door Kit

Eliminates speaker panel distortion and reduces door vibration, rattles and squeaks!

$29.99

3132
Dynamat Xtreme Door Kit 10435

Enough sound dampening to cover most doors!

$104.95

27743
Stinger Roadkill Door Kit

Use this to eliminate rattle from your doors!

$49.99

164447
Automotive-Marine grade ABS with (2) 6.5" cut outs, with out single din cut out

Automotive-Marine grade ABS with (2) 6.5" cut outs, with out single din cut out

$58.99

164445
Universal Overhead Console with (2) 6.5" cut outs and single din cut out

Universal Overhead Console with (2) 6.5" cut outs and single din cut out

$64.95

Similar Products

Best selling similar products

small

Diamond Audio HX653DI with Speaker Installation Kit

• 120 Watts Max Each, 60 Watts RMS Each
• 1" Aluminum Dome Tweeter
• Composite Fiber Weave Cone
• 4 Ohms Impedance
• Sensitivity: 87 dB
• Mounting Depth: 2.26"

(150)

$213.41

small

JBL STADIUM52F Speakers with Speaker Installation Kit

•180 Watts Max Each, 60 Watts RMS Each
• 3/4" Aluminum Dome Tweeter
• Glass Fiber cone material
• Impedance: 3 Ohms
• Speaker Baffles + Installation Accessories Included

(99)

$189.95

small

Polk Audio MM572 with Sound Dampening

• 300 Watts Max Each, 100 Watts RMS Each Side
• 1", Terylene Fabric Tweeter
• 5" x 7" Titanium-Plated Polymer Midwoofer Cone
• 4 Ohms Impedance
• Sensitivity: 93 dB
• Mounting Depth: 2.56"

(91)

$178.99

small

Polk Audio DB402 with Sound Dampening Kit

• 135 Watts Max Each, 45 Watts RMS Each
• 0.75" shallow tweeter design
• Polypropylene UV tolerant cone
• 4 Ohms Impedance
• Sensitivity: 90dB
• Mounting Depth: 1.79"

(94)

$79.00

small

Polk Audio DB5252 with Sound Dampening

• 300 Watts Max Each, 100 Watts RMS Each
• 0.75" shallow tweeter design
• Polypropylene UV tolerant cone
• 4 Ohms Impedance
• Sensitivity: 91dB
• Mounting Depth: 1.77"
• IP65 rated

(95)

$179.00

Related Searches

› Polk Audio › Polk Audio SDRLR1,SDSK2,MM 6502 Reviews › Polk Audio Speakers with Sound Deadening › Speakers with Sound Deadening under $300

Add vehicle

Save up to 10 different vehicles in your garage

2 | Make
3 | Model
Where to find vehicle info | Shop without vehicle

Select Additional Details for or Change Vehicle

Can't find your vehicle? Click here and we'll help.

Find products that fit

Find gear for your vehicle – fast.

2 | Make
3 | Model

Additional information:

Remove

Can't find your vehicle? Click here and we'll help.

Where to find vehicle info

< Go to Fitment

Didn't find your car?

Submit your details and we'll help!
Please enter the letters as they are shown in the image above. Letters are not case-sensitive.
< Back
Track order
Call our experts
Instagram Youtube