Open box - Rockford Fosgate Punch P1S4-10 10" Punch P1 Series Single 4-Ohm Car Subwoofer

Rockford Fosgate P1S410 (Open Box, Complete)

500W Max (250W RMS) 10" Punch P1 Series Single 4-Ohm Car Subwoofer

500W Max (250W RMS) 10" Punch P1 Series Single 4-Ohm Car Subwoofer

• 500W Peak
• 250W RMS
• Kevlar Reinforced Paper Cone
• High Density NBR Half-Roll Surround
• 2" 4-Layer Voice Coil
• 10 AWG Nickel Plated Compression Input Push Terminals


List price $142.99
Save: $45.04


In Stock. Only 2 Left! with warranty
Thanks , You Pay:
Order within 13 hrs 58 mins to ship 6/22

FREE delivery: Wed, June 23 to VA.

Item Condition: Open box

This product includes all accessories and is an open box item that has been returned, but shows no major signs of use.

Brand new: $119.99

60-Day Money-Back

Hassle Free Returns

365-Day Coverage

Warranty assistance for a year

Rockford Fosgate

Authorized dealer

Rockford Fosgate P1 Series Subwoofer

P1S4-10 Punch P1 Series Subwoofer

The P1 Series continues Rockford Fosgate's world famous line that is considered to be "The Woofer of Choice" for car audio systems. The P1S4-10 subwoofer has a peak power rating of 500 watts and an RMS rating of 250 watts. Just like all Rockford Fosgate products, this subwoofer is built with quality and durability. The P1S4-10 features a high modulus kevlar reinforced paper cone with a high density NBR half-roll surround. The 10 AWG nickel plated push terminals with keep a secure connection at all times while resisting corrosion. The Punch Series 10" woofer also comes equipped with 2" 4-layer high temp voice coil, poly cotton spider, extended pole piece, bumped backplate, and a proprietary spider venting/cooling technique that helps keep subwoofer operating at a safe temperature. Once again, Rockford has made a top notch product at an affordable price.

While built on a long standing history of performance, the punch series woofers can deliver not only the output to satisfy you when you want it loud but maintain a level of sound quality for when you really want to "listen" to your music. Taking many design cues from the Power Series, Rockford Fosgate engineers continue to improve the Punch Series year after year making it one of the most sought after woofer lines for music and bass enthusiasts alike. With features like Dual tear & fatigue resistant poly-cotton spider for high strength and anodized aluminum voice coil formers to handle heat buildup in the motor structure under full power situations, these drivers are designed to perform.

Anodized Aluminum Voice Coil Former

Anodized Aluminum Voice Coil Former

By using an anodized aluminum voice coil former on their subwoofers, Rockford Fosgate is able to dissipate heat from the voice coil more efficiently. A hot voice coil can melt the adhesive bonds, which will lead to eventual subwoofer failure. The aluminum voice coil former acts as a heat-sink to dissipate thermal build-up on the voice coil cool during high SPL conditions.

CEA-2031 Rockford Fosgate Subwoofers

Conforms to CEA-2031

Rockford Fosgate has built this subwoofer to conform to the CEA-2031 loudspeaker power handling industry standards. This means that you can trust the subwoofer to have the capacity to safely handle the continuous (RMS) power rating. Having a CEA-2031 power handling is important when matching a subwoofer to an amplifier because the power ratings are accurate.

Rockford Fosgate Stitched Tinsel Leads

Stitched Tinsel Leads

To improve the reliability and performance by reducing fatigue and possible shorting, Rockford Fosgate has stitched the tinsel leads to the spider. The multipoint periodic stitching lead wires reduce the mass of the tinsel leads to spread the stress over a greater area. This improves the reliability and performance of the subwoofer.



Key Benefits

  • 10" Single 4 ohm Punch Stage 1 Subwoofer
  • Power Handling:
    • Peak: 500 watts
    • RMS: 250 watts
  • Recommended power range: 125 - 300 watts RMS
  • CEA-2031 Compliant
  • Klippel Verified
  • Flex-fit Mounting pattern
  • Proprietary spider venting/cooling technique
  • StampCast basket with integrated spider venting
  • Sturdy 16 gauge compound bend frame geometry
  • High modulus Kevlar re-inforced paper-pulp cone
  • Semi-flexible, PVC removable protective motor cover
  • Multi-point high-temp/high-strength neck joint bonding technique
  • Tall-profile VAST Santoprene surround for larger surface area
  • Dual tear & fatigue resistant poly-cotton spider with woven tinsel leads
  • Fatigue resistant and reduced strain "stitched on" flexible lead wire design
  • Proprietary all metal, radially oriented compression input terminal assembly
  • Optimized motor magnetics with extended pole and bumped vented backplate
  • High temp 2" voice coil w/ spun-laced Nomex insulating re-inforcement collar
  • Die-Cast aluminum soft-touch painted trim ring allows for optional integrated grill
  • Stamped Mesh Grille Insert Available: Rockford Fosgate P1G-10

  • Mounting Depth: 5.33"
  • Cutout Diameter: 9.14"
  • Magnet Weight: 45 oz
  • Frequency Response: 23 - 250 Hz
  • Xmax: 9mm
  • Sensitivity: 84 dB @ 1 watt / 1 meter
  • Recommended Ported Enclosure: 1.40 ft³
  • Recommended Sealed Enclosure: 0.59ft³
  • Matching Amplifiers: (one subwoofer)
  • Matching Amplifier: (two subwoofers)
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

  • Priced Individually

Check out the Rockford Fosgate P1 Series Owner's Manual

Tips for Installing the P1S4-10 Subwoofer

Subwoofer Specifications
Subwoofer Series
Subwoofer Size
Peak Power Handling
RMS Power Handling
Voice Coil(s)
Impedance (Per Voice Coil)
Voice Coil Diameter
Frequency Response
Xmax (millimeters)
Subwoofer Design
Main Cone Color
Woofer Composition
Woofer Surround
Magnet Structure
Subwoofer Grille
Re-Cone Kit Available
Recommended Enclosure Specifications
Recommended Enclosure Type
Minimum Sealed Box Volume
Optimum Sealed Box Volume
Maximum Sealed Box Volume
Minimum Ported Box Volume
Optimum Ported Box Volume
Maximum Ported Box Volume
Top-Mount Depth
Cutout Diameter
Shallow Mount Installation
Electromechanical Parameters
Free-Air Resonance (Fs)
Equivalent Compliance (Vas)
Total Speaker Q Value (Qts)
Electrical Q Value (Qes)
Electrical Resistance of Voice Coil (Re)
Mechanical Q Value (Qms)
Efficiency Bandwidth Product (EBP)
What is in the box?
WITB: Subwoofers
Other Accessory #1
Other Accessory #2
Other Accessory #3
Other Accessory #4
Other Accessory #5
Authorized Dealer
Authorized Dealer
Warranty and Return Policy
Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Rockford Fosgate P1S410 (Open Box, Complete)

Rockford Fosgate P1S410 (Open Box, Complete)



Write a review

Overall rating distribution

5 star
4 star
3 star
2 star
1 star

By feature average rating



May 15, 2012

Great speakers

The following review is for P1S4-10, which is a part of the bundle you are viewing.

Great speakers forward great price. I would recommend these to anybody. Great sound, bass, and quality. I don't have anything bad to say.


found this helpful.

67 Firebird

October 6, 2014

Superior Sub

The following review is for P1S4-10, which is a part of the bundle you are viewing.

I was looking for a single 10 inch sub to give a little bass to my 67 Firebird. The exhaust on the car is loud so I really need a sub that could handle quite a bit of power. I am powering this sub off of a 900W Kenwood 4 channel amp.(the amp also powers 2 6X9s) I mounted the sub in an enclosed box that lives in the trunk. I did not want bass that would rattle the glass out...just wanted to feel the music over the rumble of the car. This sub sounds crisp and clean and hits hard. I mostly listen to rock, blues and country but my kids will throw in some occasional hip hop and the sub sounds great with all. I plan to buy one more for my daily driver.


found this helpful.


November 20, 2012

awesome sub

The following review is for P1S4-10, which is a part of the bundle you are viewing.

Great sub for the price!
I have two 10p1s4s in my legacy wagon and makes even other cars rattle. I'm quite impressed with the subs and they don't pull much power since my lights don't dim. Even with hard bass.

The only down is it doesn't really the low, lows like other subs.


found this helpful.


February 18, 2013


The following review is for P1S4-10, which is a part of the bundle you are viewing.

I purchased 3 of these subs to put in my car. In a sealed box these have good sound quality even with the right amp they thumped but did not Bang and that is what I wanted. This product is good for the price but you get what you pay for I guess. If your looking for precision sound to add to your music listening experience then these are perfect subs, but if you are looking for a sub that hits hard and is pretty powerful then I'd tell you to get another sub but everyone is different. I'd recommend as someones First Sub maybe second depending on what type of Bass you look for.


found this helpful.

Scott V

October 22, 2014

Good Bang for the Buck

The following review is for P1S4-10, which is a part of the bundle you are viewing.

I installed these under the seat in a Dodge Ram ran off a Punch 300x1 MOno amp. Awesome results. It was a job I did for my neighbor and he is super happy with it and I can hear him coming down the road. Clean low end in the car. Definitely good for novices but not an audiophile speaker. If you want that get Image Dynamics :)


found this helpful.


November 15, 2011


The following review is for P1S4-10, which is a part of the bundle you are viewing.

This sub is powered by AMP TYPE Rockford Fosgate T-600-4. Had to go with this little bad boy because I have a shallow box under my back seat (Chevy Truck). It bumps hard and clear. If you want a nice tight sounding sub this is for you. If you want to kill your innards with shock waves get two. I am more than happy with this sub. It fits my application nicely.


found this helpful.


September 13, 2012

Still a Rockin!

The following review is for P1S4-10, which is a part of the bundle you are viewing.

I bought this Fosgate system about 6 months ago, and it has really good sound & for it's size..


found this helpful.


January 21, 2012


The following review is for P1S4-10, which is a part of the bundle you are viewing.

This sub is powered by a dual 150 watt amp. It's a great combo. Tight accurate bass in my sealed enclosure.


found this helpful.


June 19, 2012

Meh good sound for the price.

The following review is for P1S4-10, which is a part of the bundle you are viewing.

So I ordered a set 2 10" because they were a really good price for two. Im running a p5002 Rockford amp. They are in a vented box and they sound decent. They just don't seem to hit the notes i wanted to hear like my last set i had (same series just the 2010 model.) or it could be my box is not sealed the best. but what can i say they do deliver nice clean thumps. they distort a bit when they are on the heavy bass notes. I am happy till i upgrade to the type-r setup! You guys also have great customer service.


found this helpful.


June 6, 2016

Very impressed!!

The following review is for P1S4-10, which is a part of the bundle you are viewing.

These subs slam in my truck..good value and extremely fast shipping..will definitely buy from them again


found this helpful.


June 1, 2020

Perfect just what i needed

The following review is for P1S4-10, which is a part of the bundle you are viewing.

I recommend these because they have good bass and the delivery is quick and easy to install also with the kit.


found this helpful.


May 2, 2020

Love it

The following review is for P1S4-10, which is a part of the bundle you are viewing.

This product feels really solid and sounds amazing I would recommend for the price.


found this helpful.


June 22, 2020

Great value

The following review is for P1S4-10, which is a part of the bundle you are viewing.

I got two of these subs to replace one 12 I had in my Optima. Way better sound and clean undistorted bass. Would recommend!


Best selling similar products

Rockford Fosgate Punch P1650

• Peak Power: 220W
• RMS Power: 110W
• 3/4" PEI Dome Tweeter
• Mounting Depth: 2-1/4"
• Injection-Molded Carbon Fiber Filled Polypropylene Woofer Cone
• 4 Ohms Impedance
• Sensitivity: 88dB



Polk Audio (DB5252) 600 Watt 5.25" Component Speakers + FREE Sound Dampening

• 300 Watts Max Each, 100 Watts RMS Each
• 0.75" shallow tweeter design
• Polypropylene UV tolerant cone
• 4 Ohms Impedance
• Sensitivity: 91dB
• Mounting Depth: 1.77"
• IP65 rated



Polk Audio MM572 - MM1 Series 5" x 7" Coaxial Speakers FREE Sound Dampening Kit

• 300 Watts Max Each, 100 Watts RMS Each Side
• 1", Terylene Fabric Tweeter
• 5" x 7" Titanium-Plated Polymer Midwoofer Cone
• 4 Ohms Impedance
• Sensitivity: 93 dB
• Mounting Depth: 2.56"



Cerwin Vega S9500.2D + NVX XLCA2 Line-Output-Converter + Amp Kit

• 4/2/1 ohms: 250 watts x 2 chan.
• Bridged, 4/2 ohms: 700 x 1 chan.
• Class-D 2-channel 4-Ohm Amplifier
• Frequency Response: 10Hz ~ 35KHz
• Crossover 35Hz – 350Hz



Autotek ATS5768CX

• 250 Watts Max, 125 Watts RMS
• Neo-Mylar Soft Dome Tweeter
• Mounting Depth: 2"
• Polypropylene Cones
• 4 Ohms Impedance
• Sensitivity: 89dB



Searches Related to the Rockford Fosgate p1s410


Model Number:




Internal SKU:


Internal Product ID:


Item Added to Cart

500W Max (250W RMS) 10" Punch P1 Series Single 4-Ohm Car Subwoofer


Keep Shopping

FREE NVX XMountPro Cell Phone Mount with Select Orders

Spend $200 and use code XMOUNTPRO to get this free!.


Belva 23 ft. of 12 Gauge Speaker Wire

Ultra-flexible PVC blended jacket for easy installation.


20 Square Feet of Sound Dampening Material

NVX Sound dampening is thicker than competitors, eliminates rattles and gives you bigger bass!



Don't see the accessory you're looking for?
View all available accessories for the Rockford Fosgate P1S410 (Open Box, Complete).