JL Audio MX280/4 | Weatherproof 4-Channel Amplifier w/ Free Amp Kit

JL Audio MX280/4 + Free Belva Amp Kit

140W RMS Class-D Weatherproof Motorcycle / ATV / SSV / UTV / Car 4-Channel Amplifier

140W RMS Class-D Weatherproof Motorcycle / ATV / SSV / UTV / Car 4-Channel Amplifier

• 50 Watts RMS x 4 @ 4 ohms
• 70 Watts RMS x 4 @ 2 ohms
• Total Peak Power: 280 Watts
• CEA-2006 Compliant/Preamp Outputs/LPF
• Frequency Response: 20 - 20,000 Hz
• Dimensions: 8.66"W x 3.09"D x 1.77"H

4.8

(16)
List price $369.98
Save: $69.99

$299.99

Out of Stock - Backorder with warranty
Thanks , You Pay:

Item Condition: Brand new

The item is brand new and not used.


protection

Add a protection plan

squarespace
3 years for

Shipping
Fast, Free Shipping

Within the US 48

60Days
60-Day Money-Back

Hassle Free Returns

365days
365-Day Coverage

Warranty assistance for a year

DESCRIPTION
JL Audio

Authorized dealer

JL Audio MX280/4

140W RMS Class-D Weatherproof Motorcycle / ATV / SSV / UTV / Car 4-Channel Amplifier
Quantity: 1

General Features:

  • JL Audio MX280/4 Weatherproof Amplifier
  • Class-D Full Range 4-Channel Amplifier
  • RMS Power Rating:
    • 4 ohms: 50 watts x 4 chan.
    • 2 ohms: 70 watts x 4 chan.
    • 1 ohm: ------------N/A------------
    • Bridged, 4 ohms: 140 watts x 2 chan.
  • Total power output: 280 watts
  • CEA-2006 Compliant Amplifier
  • Pulse Width Modulated MOSFET power supply
  • Wired remote bass level control included
  • LED power (green) and protect (red) indicators
  • Soft start turn-on
  • IPX6 water resistant rating
  • 4/3/2 channel operation
  • Black powder coat finish
  • 3-way protection circuitry (thermal, overload, and speaker short protection)
  • Heavy duty aluminum alloy heat-sink for extreme heat dissipation
  • Input sensitivity:
    • Low level: 250mV - 4V
    • High level: 750mV - 15V
  • Frequency Response: 20 - 20,000 Hz
  • Total Harmonic Distortion (THD): <1%
  • Signal to Noise Ration: >68 dB
  • Variable high-pass filter: 35 - 300 Hz, 12 dB/octave
  • Variable low-pass filter: 35 - 300 Hz, 12 dB/octave
  • Fuse Rating: 35 A x 1
  • 8 gauge power and ground wiring is recommended for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier. Click Here for our contact information.
  • Dimensions: 8.66"W x 3.09"D x 1.77"H
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty


Check out the MX280/4 Owner's Manual

Belva BAK84

Complete 8 Gauge Amplifier Wiring Kit with 4-Channel RCA Interconnects (CCA Wiring)
Quantity: 1

General Features:

  • Complete 8 Gauge 4-Channel Amplifier Installation Kit
  • Designed specifically for car audio systems up to 500 watts RMS
  • Premium Powerflex power and ground wire provides optimal power transfer
  • Made from Copper-Clad Aluminum for a pure uninterrupted transfer of power and signal
    • Belva CCA wire is made from 30% copper while other CCA wire is just 10% copper
  • Helical Twist Construction Audio Interconnect RCA cables minimize noise and interference
  • Mini-ANL Fuse holder with a 60 amp Mini-ANL fuse offers ideal protection
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

Kit includes:

  1. 17 ft. (5.2 meters) Red 8 gauge power wire
  2. 3 ft. (.91 meters) Black 8 gauge ground wire
  3. 17 ft. (5.2 meters) Gray 18 gauge remote lead wire
  4. 17 ft. (5.2 meters) Helical Twist 4-channel RCA interconnect cable
  5. 40 ft. (12.2 meters) Speaker cable
  6. One In-line Mini-ANL Fuse Holder with a 60 amp Mini-ANL fuse
  7. One black rubber firewall grommet
  8. One 8 Gauge red chrome plated ring terminals
  9. One 8 Gauge black chrome plated ring terminal
  10. Three 18 Gauge red Spade terminal
  11. Two 18 Gauge black Spade terminal
  12. One 18 Gauge red butt connector
  13. Ten 4" Black zip ties

FEATURES & SPECS
Power Specifications - Full Range Channels
RMS Power @ 4 ohms
50 watts x 4 channels
RMS Power @ 2 ohms
70 watts x 4 channels
Bridged RMS Power
140 watts x 2 channels
Amplifier Specifications
Amplifier Class
D
Number of Channels
4
Total Peak Power Output
280 watts
Total RMS Power Output
140 watts
Maximum Input Gauge Size
8 AWG
Minimum Impedance Unbridged
2 ohms
Minimum Impedance Bridged
4 ohms
THD at Rated RMS Power
<1%
Speaker Level Inputs
No
Preamp Outputs
No
Built-in Crossover
Low-Pass (LP)
High-Pass (HP)
High-Pass Crossover Frequency
35 - 300 Hz
Low-Pass Crossover Frequency
35 - 300 Hz
Signal-to-Noise Ratio
>89.5 dB
Bass/Gain Remote
No
Fan Cooled
No
Fuse Rating
35A x 1 
CEA-2006 Compliant
Yes
Amplifier Kit Specifications
Number of Amplifiers Supported
Power/Ground Wire Size
Power Wire Length
Ground Wire Length
Speaker Wire Included
Speaker Wire Length
Remote Wire Length
Interconnect (RCA) Signal Cables Included
Fuse Holder
Fuse Size
Distribution Block Included
Warranty and Return Policy
Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer
REVIEWS
JL Audio MX280/4 + Free Belva Amp Kit

JL Audio MX280/4 + Free Belva Amp Kit

4.8

(16)

Write a review

Overall rating distribution

5 star
88%
4 star
6%
3 star
0%
2 star
6%
1 star
0%

By feature average rating

Durability
5
Value
5
Features
5
Design
5
Usability
5

Anonymous

August 5, 2018

Great value

The following review is for BAK84, which is a part of the bundle you are viewing.

Fast shipping works great with no problems. I would order other if i ever needed it

10

found this helpful.

brian

October 19, 2015

Works as said

The following review is for BAK84, which is a part of the bundle you are viewing.

Everything needed for a 4 ch amp install. Better quality than other cca kits I have used before. Nice thick strands.

11

found this helpful.

Anonymous

September 22, 2018

Great deals

The following review is for BAK84, which is a part of the bundle you are viewing.

I recommend this to anyone. The shipping is fast and you always get a good deal.

9

found this helpful.

Adam

February 1, 2018

Good Value Kit!

The following review is for BAK84, which is a part of the bundle you are viewing.

Everything I needed and good quality wire, not like some other cheap thin gauge wire you get in similarly priced kits elsewhere.

7

found this helpful.

Chad

September 15, 2017

Great value

The following review is for BAK84, which is a part of the bundle you are viewing.

Included in a bundle package for the price well worth it

5

found this helpful.

JESUS C

December 28, 2020

Ok starter Kit

The following review is for BAK84, which is a part of the bundle you are viewing.

It's a ok kit to buy but check the RCA jacks my kit came defective one pair of RCA jacks failed. When I finished completely installing it in my truck and turned on the head unit only to fine out 3 of my 4 channel amp was working had to take out the multimeter tested the Amp then uninstall all the head unit tested RCA jacks and one pair was defective I would assume that they would work they are New. So save time and test the RCA jacks for continuity.

4

found this helpful.

Jason

April 11, 2020

Good value

The following review is for BAK84, which is a part of the bundle you are viewing.

Good value. All the stuff you need for a couple of speakers and a sub to an amp. Easier than buying it individually.

4

found this helpful.

Anonymous

August 14, 2018

Great value!

The following review is for BAK84, which is a part of the bundle you are viewing.

Fast shipping and I recommend it for anyone. Everything u see in the picture is what u get.

7

found this helpful.

Gerald

March 31, 2018

Amp installation kit

The following review is for BAK84, which is a part of the bundle you are viewing.

Belva did a great job with this 4 channel amp wiring kit. Had more than enough lengths on all wires. Terminals are solid. Will buy this kit for now on for my 4 channel amp installs.

5

found this helpful.

Frankie

April 24, 2017

Awesome Buy

The following review is for BAK84, which is a part of the bundle you are viewing.

It was everything I needed one package for a great price

6

found this helpful.

brian

November 15, 2015

Works as said

The following review is for BAK84, which is a part of the bundle you are viewing.

Works good and is high quality cca wiring, better than many others I have used. Fine for about a 400 watt rms 4 ch amp set up. Larger go with 4ga to be safe.

6

found this helpful.

Anonymous

September 16, 2019

Nice Kit

The following review is for BAK84, which is a part of the bundle you are viewing.

Worked great in my 1997 Tahoe. Had enough cable to put the amp under the passenger seat. If you're trying to put it in the cargo area, you'll need more cable.

5

found this helpful.

Anonymous

December 6, 2018

Marine jl audio amp

The following review is for MX280/4, which is a part of the bundle you are viewing.

Amp is compact easy to install and adjust sounds great

2

found this helpful.

Tombo

April 28, 2020

Great kit!

The following review is for BAK84, which is a part of the bundle you are viewing.

Comes with everything you need to get going at a great price

1

found this helpful.

Noe

April 28, 2020

Great value

The following review is for BAK84, which is a part of the bundle you are viewing.

Exactly what I need for my 4 channel amp will b installed this weekend.

1

found this helpful.
ACCESSORIES
TRENDING SIMILAR MARINE AUDIO PACKAGES & BUNDLES

This product is temporarily out of stock. May we recommend...

NVX MVPA4 4-Channel Amplifier + Free Pure OFC Copper 8 Gauge Installation Kit

• The size of a postcard with 400 Watts True RMS Output!
• • MVP Series 4-Channel Micro Class D Amplifier
• 50W x 4-Chan. @ 4 ohms
• 100W x 4-Chan. @ 2 ohms
• 3-Way System Protection
• 4/3/2/1 Channel Operation
• 8 Gauge Power and Ground Inputs
• Extremely Small Footprint!
• 8 Gauge 4-Channel Complete Amplifier Installation Kit
• For Car Audio Systems Up To 600 Watts RMS
• Silver-Tinned 100% Virgin Copper
• 4-channel RCA Interconnect Cable

(117)

$314.99

JL Audio JD400/4 Amplifier + Free High Quality NVX Amp Kit

• 4-Channel Class D
• NexD Switching Technology
• Compact and Powerful
• Copmlete Signal Processing Sections

(64)

$294.98

NVX MVPA6 6-Channel Marine Amplifier + 8 Gauge Marine Amp Wiring Kit

• 100 Watts RMS x 6 @ 4 ohms
• 150 Watts RMS x 1 @ 2 ohms
• CEA-2006 Compliant/Preamp Outputs/LPF
Weatherproof Amplifier
• Micro Amp
• 12.9"W x 4.4"L x 1.7"H

(44)

$429.99

Hertz HCP1D Amplifier + Free Amp Wiring Kit

• 380 Watts RMS x 1 @ 4 ohms
• 700 Watts RMS x 1 @ 2 ohms
• CEA-2006 Compliant
• Refined Heatsink with High Convection Capability
• Automatic Remote Turn-On/Off function
• Dimensions:8.46" x 7.48" x 1.97"

(59)

$304.99

JL Audio MX600/3 Amplifier + Free High Quality NVX Amp Kit

• 400 Watts RMS x 3 @ 4 ohms
• 600 Watts RMS x 3 @ 2 ohms
• Total RMS Power: 600 Watts
• IPX6 Water Resistant
• 0 - +12 Bass Boost
• Heavy Duty Aluminum Alloy Heatsink
• Dimensions: 9.33" W x 4.5" L x 1.77" H

(62)

$459.99

Searches Related to the JL Audio MX280/4, BAK82
ITEM DETAILS

Manufacturer:

Model Number:

MX280/4, BAK82

Weight:

5.00lbs

Internal SKU:

mx2804_bak84

Internal Product ID:

181207

Item Added to Cart

140W RMS Class-D Weatherproof Motorcycle / ATV / SSV / UTV / Car 4-Channel Amplifier

$299.99

Keep Shopping

Why SquareTrade?

  • The #1-Rated Protection Plan
  • 5-Day Service Guarantee & Free Shipping
  • Protection from Normal, Everyday Use
You have added a warranty
$32.99
Add Warranty
3 years of protection

NVX XBG3PK Big 3 Kit with True 0 Gauge 100% Oxygen-Free Copper

1/0 AWG Big 3 Upgrade Kit with 100% OFC Wire for Audio Sytems up to 350 Amps

$99.99

Add

Don't see the accessory you're looking for?
View all available accessories for the JL Audio MX280/4 + Free Belva Amp Kit.