• RMS: 75 W x 6 @ 4 ohms, 100 W x 6 @ 2 ohms, 200 W x 3 @ 4 ohms Bridged
• NexD™ Switching Technology
• Differential Balanced Input Section
• Advanced Rollback Protection
• Frequency Response: 12 Hz - 22 kHz (+0, -1dB)
• Detented, Calibrated Filter Freq. Potentiometer
This potent 6-Channel amplifier employs JL Audio's high-speed NexD switching design to achieve unprecedented efficiency and amazing power output in an ultra-compact chassis. Don't let the small size fool you, though... this amplifier is capable of serious power, delivering a full 600W of continuous total power into a 2 ohm load (14.4V, 1% THD). Targeted specifically for an audiophile-grade system, the XD600/6v2 includes a variable mode low-pass/high-pass filter with a continuously variable cutoff frequency selection from 50-500 Hz. With the XD600/6v2, you have lots of great options. Use it as a six-channel satellite amplifier with 75 W x 6 @ 4 ohm , or bridge four of its channels to create a staggered power four-channel amplifier with 200 W x 2 @ 4 ohm for your front satellites and 75 W x 2 @ 4 ohm for your rear satellites. You can also drive two subwoofers with 200 W each, plus a pair of satellites with 75W x 2.
The XD600/6v2 also features the v2 Spec feature set, which consists of automatic turn-on capability (via signal sensing or DC-offset sensing), and a dual-range differential balanced input section able to handle a wide range of input voltage levels. With the addition of an HD-RLC remote level control (sold separately), you can control the volume of one, two or all three channel pairs of the XD600/6v2 from the front of the vehicle. This amplifier features a black powder-coat finish and a gasketed, brushed aluminum cover for the controls.
JL Audio's signature Advanced Thermal Rollback protection system eliminates annoying thermal shutdown events to keep the music playing, even under the most demanding conditions. Should the amplifier reach an unsafe operating temperature, a special circuit rolls back peak power output, without changing gain, until the amplifier cools down to a safe operating temperature. The red "Thermal" LED will light to indicate this condition has been reached. Once the amplifier cools down, the circuit restores full peak power output and the red "Thermal" indicator reverts to its normal state. The operation of Advanced Rollback Protection is inaudible in most cases.
From the same minds that gave us the technology found in the 'Slash' amplifiers, JL Audio has taken the simple fixed PWM design approach and enhanced it with a very high switching frequency. Full-range NexD amplifiers and channels feature a variable, ultra-high speed version of the NexD technology (switching at well over 400 kHz). In these designs, a self-oscillating modulator with "feed-forward" sends information about the instantaneous power supply voltage to the modulator, combining this with the input signal to cancel out any distortion due to supply voltage fluctuation. This reduces distortion prior to applying feedback, simplifying the overall feedback loop design.
JL Audio XD600/6v2
600W XDv2 Series 6-Channel Class D Full-Range Amplifier with High-Speed NexD Switching Design
NVX XKIT46 (5- or 6-Channel Amp Kit)
100% Copper, True Spec 4 Gauge Amp Installation Kit for 5- or 6-Channel Amps, Includes RCA Interconnects & 60 ft Speaker Cable
This item is currently not eligible for our low price guarantee. This may be due to supply constraints, manufacturer restrictions, or another reason. We're always here to help you get the best price possible so give us a call or email today. Our experts will do their best to build the system that works for you within the rules.
Overall rating distribution
By feature average rating
August 13, 2015
I was impressed with this kit. Their claim of a "true gauge" wire seems to be true because wires are thicker compared to other wires I have used claiming to be the same gauge. Overall the wires seem to be of great quality. Patch cables are good. They aren't super high end, but they do the job well. I'd recommend it to anyone looking for an amp kit.
March 28, 2017
great quality. so far so good.
very high quality 4 gauge wire. I used this kit as an integral part of and upgrade in my 2016 jeep jku...I could not be happier with the way my upgraded premium marine grade kicker speakers sound with my marine grade 5 channel amp. I'm only running 800 watts total, 400 to the kicker 10" sub..also a top of the line sub from /kicker. but the clarity of the highs and added non-distorted punch of bass is phenomenal! plus I your guys' Q&A videos are awesome! keep it coming and hopefully you will get more Jeep Wranglers!!
December 8, 2015
Nice Install Kit
NVX install kits are some of the nicer ones I have used. This on in-particular works great with their 5 channel amp. I especially like the extra layer of protection for the cable running in the engine bay, give everything a nice touch once installed. NVX wire is exactly like they say and true to size. I keep some on hand for other projects (big 3 upgrades etc) and it has held up really well in everything I have used it in, including an Off-road truck where other brands have failed.
May 31, 2018
NVX XKIT46 (5- or 6-Channel Amp Kit)
The wiring kit contained exactly what I needed and even a few spare parts/connectors. The power wire had an abrasion resistant sheathing over the section that is under the hood and the ground and power wires included precrimped ring connectors that work and look great. You can't beat the quality and convenience for the price.
April 25, 2018
Absolute Best Quality
This NVX kit comes with everything and just because it comes with everything doesn't mean that quality has to be sacrificed. The quality of this kit is absolutely amazing and the fuse holder is so perfect that I ordered another one for my big 7 uograde. I got this for free with my amp purchase and I didn't even bother looking at another kit just in case because of what I read in the reviews. I'm halfway through installing my system now and I can tell you they give you more wire than you need. Will buy NVX products whenever I can.
This product is temporarily out of stock. May we recommend...
• CVP Series 5-Channel Amplifier
• Class-D Circuitry
• 2-Ohm Stereo, 4-Ohm Bridged Full Range Operation
• Direct Short, Thermal, & Overload Circuits Protect Amplifier
• Variable 12dB High, Low, & Subsonic Crossovers
• 65 Watts RMS x 4 @ 4 ohms
• 90 Watts RMS x 4 @ 2 ohms
• 180 Watts RMS x 2 @ 4 ohms (bridged)
• 150 Watts RMS x 1 @ 4 ohms (sub channel)
• 300 Watts RMS x 1 @ 4 ohms (sub channel)
• Class A/B Full-Range Channel Amplifier w/Class-D Bass Channel
• KickEQ™ 6dB variable bass boost for those additional low frequencies
• FIT+™ (Fail-safe Integration Technology-PLUS) means it works with nearly every radio
• RMS: 75W x 4, 325W x 1 Channel @ 4 ohms, 125W x 4, 500w x 1 channel @ 2 ohms, Bridged, 4 ohms: 250W x 2 channels, 750 watts x 1 channel @ (1 ohm)
• Total Peak Power: 2500W
• 4/3/2 or Mono channel operation
• Fuse Rating: 100A x 1
• Signal to Noise Ration: >104 dB
• Total Harmonic Distortion (THD): <0.05%
• 100 Watts RMS x 6 @ 4 ohms
• 150 Watts RMS x 6 @ 2 ohms
• CEA-2006 Compliant/Preamp Outputs/LPF
• Micro Amp
• 12.9"W x 4.4"L x 1.7"H
• Built-in DSP
• Compact Power
• Class D Full Range
• MOSFET Power Supply
• High Level Input with Signal Sense
Internal Product ID: